Small Arms Fire
acoustic localization of gunfire
-
Product
3U VPX Arm Processor
VPX3-1703
-
Curtiss-Wright Defense Solutions
Curtiss-Wright’s VPX3-1703 is the latest OpenVPX™-compliant 3U processor that combines the high performance of the NXP® Layerscape® LS1043A Arm® quad-core A53 processor with advanced I/O capabilities.
-
Product
Portable Measuring Arms
A-LINE
-
Trimos A-line portable articulated measuring arms allow an extremely easy and accurate 3D measurement.
-
Product
Arm® Cortex®-A53 Quad-Core Panel Controller
AMAX-PT400
-
Optimized Linux OS for real-time controlAchieve 16-axis motion control with 2ms EtherCAT cycle timeOPC UA and Modbus TCP/RTU for IT connectivity enabled by CODESYSEtherCAT, and CANopen for OT connectivity enabled by CODESYSUnlimited I/O points, fieldbus networks, and visualization variables for CODESYS applicationsCODESYS Visualization (Target & Web), SoftMotion and CNC/Robotics support provided by different packagesAdvantech Data Connect (ADC) Library provides flexible and highly efficient data connection with 3rd party application software through symbols (PLC Handler) and shared memory (C++/C#)NXP Arm® Cortex®-A53 i.MX 8M Mini quad-core processor7" and 10.1" LCD with multi-touch P-CAP and true-flat IP66-rated front panel
-
Product
Small Full Safety Insulated Crocodile Clip
126017/Colour
-
IEC 1010 Rating: 300 Volts CAT II Double/Reinforced Insulation 10AmpsStandard Colours: Black, Red, Green, Blue, Yellow, WhiteFeatures: Will accept all standard 4mm plugs.
-
Product
Infrared Receiver For Parallax Small Robots
350-00039
-
Infrared receiver with 38 kHz carrier frequency, for use as a replacement part with the following small robot kits:*BASIC Stamp Boe-Bot*Robot Shield Kit for Arduino*Propeller ActivityBot*cyber:bot for micro:bit
-
Product
Battery Charger-Analyzer for small battery systems (up to 10A-Hr)
24-400xg
-
The 24-400XG is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries.With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the 24-400XG can satisfy the requirements of most small (0 to 10 A-hr) rechargeable battery systems.The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit (no load) and Overvoltage conditions.Two large LED digital meters permit the simultaneous monitoring of voltage and current, while eight indicator lights inform of the status of the operation.
-
Product
I-Pi SMARC Development Kit based on NXP® i.MX 8M Plus Quad Arm® Cortex-A53 Processor
I-Pi SMARC IMX8M Plus
Software Development Kit
The I-Pi SMARC IMX8M Plus is a SMARC-based smart solution development kit powered by NXP i.MX8M Plus (Quad-core Arm Cortex-A53) processor with a Neural Processing Unit (NPU) at up to 2.3 TOPS.This is the first SMARC R2.1 development kit focused on machine learning, vision, advanced multimedia, and industrial IoT with high reliability. As such, it supports dual image processors and two camera inputs for an effective Vision System, as well as applications beyond, including smart homes, building cities, and industry 4.0.
-
Product
Fixed-Mount Thermal Imaging Camera for Condition Monitoring and Early Fire Detection
FLIR A500f/A700f Advanced Smart Sensor
-
FLIR A500f and A700f Advanced Smart Sensor Thermal Cameras are ideal for users who want built-in, on-camera analytics and alarm capabilities for outdoor condition monitoring and early fire detection applications. These cameras can help companies protect assets, improve safety, maximize uptime, and minimize maintenance costs. Featuring a protective housing designed to withstand harsh environmental conditions, FLIR A500f/A700f cameras combine unmatched thermal imaging with edge computing and industrial internet of things (IIoT) for simplified inclusion in new or existing networks. For VMS integrations, thermal and visible streams can be viewed independently or simultaneously. The cameras are easy to add, set up, and operate in HMI/SCADA systems, offering automation system solution providers a running start.
-
Product
NI-9247, 50 kS/s/ch, 50 Arms, 147 Apk, 24-Bit, 3-Channel C Series Current Input Module
783589-01
Current Input Module
50 kS/s/ch, 50 Arms, 147 Apk, 24-Bit, 3-Channel C Series Current Input Module - The NI‑9247 is designed to support direct ring lug connectivity to the three-phase high-current measurements of 1 A and 5 A current transformers (CTs). It is optimized for power, energy, and industrial applications. The safety features, certifications, input ranges, overvoltage ranges, and connectivity are well suited for applications such as power quality monitoring and metering, utility pole-mounted smart switches, utility pole-mounted smart grid reclosers, substation merging units, industrial machine measurements, health monitoring, predictive maintenance and prognostics, and phasor measurement units (PMUs).
-
Product
Arm® Cortex®-A55 Quad-Core Embedded Controller
AMAX-4540
-
Optimized Linux OS for real-time controlAchieve 16-axis motion control with 2ms EtherCAT cycle timeOPC UA and Modbus TCP/RTU as IT connectivity enabled by CODESYSEtherCAT, and CANopen as OT connectivity enabled by CODESYSUnlimited I/O points, fieldbus networks, and visualization variables for CODESYS applicationsCODESYS Visualization (Target & Web), SoftMotion and CNC/Robotics support via different packagesAdvantech Data Connect (ADC) Library provides flexible and highly efficient data connection with 3rd party application software through symbols (PLC Handler) and shared memory (C++/C#)Rockchip RK3568J Quad-Core Arm® Cortex®-A55 1.4GHz (Up to 1.8GHz)Built in connectivity interface: 4 x GbE, 8 x RS-232/485, 2 x CAN 2.0B, 1 x mPCIe and 1 x M.2 B key 2280
-
Product
Small Footprint Flex 20 ATE
Flex 20
-
The Flex 20 is floor mounted but maintains a small footprint on the shop floor. A VPC S6 interface is normally used on this system allowing multiple test fixtures to be used with the system.
-
Product
Accessory Kit, Sloped Enclosure, Gas Spring Arm
410114133
Accessory Kit
VPC sloped enclosures come standard with a gas spring arm installed on the right side. Purchase this kit for an additional arm, if a second arm is desired for the left side or as a replacement for an existing arm. Arm works on the right or left side.
-
Product
Octal Small Form Factor Pluggable Electrical Interface
-
Eoptolink Technology Inc., Ltd.
Eoptolink is developing OSFP(Octal Small Form Factor Pluggable) a new pluggable form factor with eight high speed electrical lanes that will initially support 400 Gbps (8x50G or 4x100G). It is slightly wider and deeper than the QSFP but it still supports 32 OSFP ports per 1U front panel, enabling 12.8 Tbps per 1U switch lot. OSFP is designed to support the next generation of 800G optics modules that will use eight lanes of 100Gbps, and offers backwards compatibility with 100G QSFP.
-
Product
Portable CMM Arm
Master3DGage®
-
Master3DGage® is a complete CMM hardware and software solution for inspection and reverse engineering. The multi-axis portable CMM features absolute encoders for quick start-up and highly accurate and precise measurements. Its lightweight, wireless design and battery-powered capability enable the Master3DGage® to be placed right into your CNC machine for in-process inspection.Optional 3D scanner and hot-swappable probes make it easy to switch from scanning complex profiles to probing primitive features in seconds.
-
Product
Small Step Broadband Synthesizer
SBC Series
-
*Connectorized Package *Fine Resolution Design *Broadband Designs Available *Low Phase Noise *Ultra-Low Spurs *Optional Internal Reference
-
Product
Medalist i1000D Small Foot Print Inline and Offline In-Circuit Systems
U9405A
System
Unlike traditional bridge type board handlers that add a 3rd party equipment on your offline ICT systems, we provide a one-stop shopping experience when you are automating your in-circuit test.
-
Product
6-48V Digital Circuit Tester With Pierce Probe, Long Probe And Small Probe
1675D
-
Peaceful Thriving Enterprise Co Ltd
Check on 6, 12, 24 and 48V systems.
-
Product
DDR4 X16, 2-Wing, Small KOV, BGA Interposer For Logic Analyzers
W4636A
Interposer
The W4636A DDR4 x16 – 2 wing BGA interposer for 96 ball DDR4 DRAM is designed for data rates up to and including 2.4 Gb/s. The W4636A probes all ADD/CMD/CNTRL and partial DQ/DQS, and it is designed for minimal KOV for space limited systems under test. The W4636A is the least expensive DDR4 BGA interposer for a logic analyzer.
-
Product
AC / DC Current Probe, 100 MHz, 30 Arms
N2783B
Oscilloscope Probe
The N2783B current probe is an accurate and reliable solution for measuring AC and DC currents. Using a hybrid technology that includes a Hall effect sensor and an AC current transformer, the probe provides accurate measurement of DC or AC currents up to 30 Arms continuous.
-
-
Product
Small, Low Cost, Uncooled InGaAs Camera
Bobcat 320 TE0 and WL Series
-
The Bobcat 320 TE0 and WL series are based on an in-house developed, uncooled InGaAs detector with a 320 x 256 pixel resolution. The Bobcat 320 TE0 and WL cameras are offered with GigE Vision interface, 400 Hz maximum frame rate and feature low weight and power.
-
Product
ARM 9 System on Module
MS 1515
-
- Processor: LPC3250 processor with ARM 9 core running at 266 MHz SDRAM- Memory: DDR2 256 MB (scalable to 512 MB)- Flash Memory: NAND flash 512 MB- Display & Graphics: Programmable color LCD controller supports up to a TFT interface- Touch screen: Integrated touch screen controller- Network Support: 10/100 Base-T Ethernet PHY- PC Interface: One USB 2.0 high-speed On-the-Go interface- Serial Interfaces: Up to four external UARTs- + CAN 2.0B controller- + Three I2C ports- + Three SPI ports- GPIO: Programmable I/O depending on peripheral requirements- Mechanical: 60 mm wide x 60 mm long x 5.4 mm high
-
Product
Rectal Probe For Small Animals
RET-4
-
The RET-4 Rectal Probe for very small animals (mice). Flexible polyurethane sheath with smooth rounded tip.
-
Product
NXP® ARM Based Open Frame Touch Panel PC
SP2-IMX8 Series
Panel PC
- NXP i.MX8M Plus high-performance processor- Built-in 2.3 TOPS NPU for entry level AI computing (ex. AOI)- PCAP touch screen (7"/10") with true flat design- 32GB eMMC and external Micro SD slot for storage expansion- Expansible I/O design from edge I/O- Support Multi-OS: Linux, Windows, Android- Support Speaker, Mic-in, Line-out and buzzer- Support 1GbE LAN TSN
-
Product
Fire Alarm Testing Kit
05NK005
-
The simple budget kit for testing fire alarm systems and carrying out noise assessments in companies without a definite noise problem. Featuring a choice of Class 1 or Class 2 sound level meter with calibrator in a handy case.
-
Product
Small I/O Connectors
APEX
-
APEX connectors are designed to provide optimum performance in small I/O test and measurement applications. APEX connector modules are unmatched for strength, stability and performance when compared to the typical molded plastic alternatives. APEX aluminum back shells are designed to truly withstand the rigors of real-life applications. When performance and reliability are your primary metrics, APEX is the right choice.
-
Product
ARMS
-
Is a 3D measuring arm, convenient in use whether for touch-probing or with the non-contact Kreon laser scanners.
-
Product
(Small Instrumentation Modules)
SIM900
-
Stanford Research Systems, Inc.
The SIM900 Mainframe is the platform on which a SIM system is assembled. The mainframe provides power, computer interfaces, clock synchronization, and individual module status. Eight internal module slots accommodate single-width and double-width modules.
-
Product
Fire Control System
MS 1120
-
PCI Based BTA is used to test FCC System Processor (8086) & Analog Boards. This system consists of a PC-AT, Digital Input / Output (DIO) Board and Analog Input / Output (AIO) Board to provide the necessary input/output signals to/from the board to be tested.
-
Product
Small Motor Dynamometer
90407
-
The Model 90407 Conveyor Test Stand by Sensor Developments Inc. is a device used for testing operational parameters of a conveyor motor/roller. The system operates the conveyor motor/roller and performs loading operations, while recording all of the important motor/roller parameters for later analysis.
