Millimeter Wave
extremely High Frequency in the range of 30 to 300 gigahertz.
See Also: Wave, Extremely High Frequency, Long-Wave IR, Lightwave, Shear Wave, Sub-mm Wave, Microwave, Wavelet, Continuous Wave, Submillimeter Wave, Sine Wave, Shock wave, mmWave, MW
-
Product
Receiver, I2 Micro ICon, 120/12 Position Hybrid, Loaded With Twin Female Contacts (610 138 200)
310130104
Receiver
The i2 Micro iCon receiver is a one piece connector capable of holding up to 120 Signal QuadraPaddle contacts and 12 Micro Coax or Micro Power. QuadraPaddle modules are molded on .100” (2.54 mm) centers to meet the need for high-density I/O in a compact assembly. This i2 receiver is pre-loaded with twin female contacts, QuadraPaddle Part # 610 138 200. Accessories such as keying pin kits, protective covers, and strain relief are available.
-
Product
ZIO Module With Four COM Ports And One PCI Express Mini Card
AX93262
-
*Specification: 2 x RS-232/422/485, 2 x RS-232, 1 x PCI Express Mini Card*Dimension: 80 x 55 mm*Accessory: 2 x COM with bracket cable*Compliant Product: CAPA840, CAPA843, CAPA880, CAPA500, CAPA313
-
Product
Switch Probe H876KB
1016185
-
The H876KB is a highly efficient switch probe known for its normally open (NO) configuration, making it an ideal choice for various applications in automated systems. With an internal thread specification of 2.0X0.25, the H876KB is designed for easy integration, offering reliable performance in demanding environments. Measuring a total length of 37.90 mm with an outer diameter of just 2.00 mm and a collar height of 0.20 mm, this product provides a compact solution without compromising on functionality.
-
Product
Test Port Adapter Set, 2.4 Mm To 2.4 Mm
85130G
Test Port Adapter
The Keysight 85130G test port adapter protects the test set port from connecting directly with the device under test. It has a special rugged female connector that connects to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. This set contains a NMD-2.4 mm (f) to NMD-2.4 mm (m) adapter and a NMD-2.4 mm (f) to PSC-2.4 mm (f) adapter. The frequency range for these adapters is dc to 50 GHz with a return loss of 23 dB or better.
-
Product
X-RAY Cameras Based On CCD
XiRAY
-
*High resolution direct phosphor imaging, ideal for Micro CT*Ultra-low readout noise with CCD and especially the new sCMOS sensors*Crystal clear 14 bit/pixel images*Partial readout and binning modes for enhanced sensitivity and higher speed*Non-linearity over full dynamic range <2% (of full scale) to 95% of full scale*External triggering, LVTTL*Low power consumption 6 Watt with Cooling or 2W without*Antiblooming, Enhanced Statistical Extra-Mural Absorption*Radiation hardened, Support of Energy levels 7 to 100keV*Measures just 63 x 63 x 46 mm*Peltier TE Cooled with Heatsink and optional fan
-
Product
Probe Systems
Mini-PS4L
-
The mini-PS4L series of probe systems are built using a similar concept as our patented Probe System for Life (PS4L) Architecture. The base system is built on a 300 mm x 300 mm metric breadboard and that allows the user to configure the system to meet the application and budget.
-
Product
Micro Coax, Patchcord, ITA , 36", 50 GHz, Flex 405, to 2.4 MM Plug
7-372105764-036
Coax Patchcord
Micro Coax, Patchcord, ITA , 36", 50 GHz, Flex 405, to 2.4 MM Plug.
-
Product
FXB-CY-01-02 Prüfadapter Für Rundzellen
1044564
-
The FXB-CY-01-02 Prüfadapter für Rundzellen is an essential testing tool designed to accommodate round cells. This adapter, with the order code 1044564, is engineered for optimal performance in a wide temperature range of -45°C to +100°C and features a sturdy construction to ensure reliability in various applications. With specific attention to precision, the adapter is crafted with a nominal travel of 4.00 mm and a maximum travel of 5.00 mm, making it versatile for different testing scenarios.
-
Product
Elevated 2.65 (75.00) - 6.50 (184.00) High Performance Lead Free Probe
LFRE-25T1-6.5
ICT/FCT Probe
Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 1,000,000Overall Length (mil): 1,300Overall Length (mm): 33.02
-
Product
Ultra High 2.84 (81.00) - 10.00 (283.00) High Performance Bias Ball Probe
POGO-1I8-10-S
ICT/FCT Probe
Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 1,000,000Overall Length (mil): 1,300Overall Length (mm): 33.02
-
Product
Standard 1.00 (28.00) - 1.80 (51.00) General Purpose Probe
P2662BG-1C1S
General Purpose Probe
Current Rating (Amps): 3Average DC Resistance lower than (mOhm): 30Test Center (mil): 50Test Center (mm): 1.27Full Travel (mil): 68Full Travel (mm): 1.73Recommended Travel (mil): 50Recommended Travel (mm): 1.27Overall Length (mil): 575Overall Length (mm): 14.60
-
Product
3.5 Mm-3.5 Mm RF Cable
136691-0670
RF Cable
RF Cable, SMA (M) to SMA (M), 0.670 Meter Length, 26.5 GHz, Temp Stable
-
Product
Basic Contact Probes (138 Mil) H773DS-30
1010456
-
The Basic Contact Probes (138 mil) H773DS-30 is designed for precision measurement and high reliability in various applications. With an order code of 1010456, these contact probes are engineered to ensure optimal electrical connectivity while maintaining dimensional accuracy. The primary features of this model include a total length of just 3.00 mm and an outer diameter of 3.20 mm, making them compact yet efficient for effective operation in tight spaces.
-
Product
Linear Testfixture Testfixture for Mass Interconnect Cassette Interface Cassette and VPC ITA Frame Not Included, UUT 306 x 248 mm
MG-02-01 VPC G12
-
FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with detachable aluminium back and bottom panels• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (2000N) 1300 units• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 306 x 248 mm (wxd)• Outer dimensions: 470 x 490 x 100 x 170 mm (wxdxh1xh2)• Designed for Mass interconnect changeable cassette• Up to a maximum of 8 interface blocks of 160 or 170 signals• All interface blocks can be customized
-
Product
POF Ext Ø 1,5mm 600mm, from 5mm Lens to VPC ITA Contact
YAV90CLR10
LED Sensor
The probes for sensing LEDs, P/N YAV90CR10 feature an Optical Head to correct missalignment errors in X and Y axis. As a result, the relative read out will oscillate less tan 5% with a missaligment of + 0,5 mm Offset
-
Product
Attenuator Interconnect Kit, 2.4 mm
11716F
Interconnect Adapter
The 11716F attenuator interconnection kit provides the necessary parts to connect 84904/8M and 84904/6L programmable step attenuators in series.
-
Product
Threaded Contact Probe F73006B090G050
1030988
-
F73006B090G050 (item number 1030988) is a threaded Contact Probe for fixtures where the probe must remain securely in its installed position. The threaded mounting of F73006B090G050 supports secure seating in wire-harness and connector tests, including setups exposed to vibration or lateral forces. The design of F73006B090G050 is well suited to wire-harness and connector testing and to fixtures exposed to vibration or lateral forces where probe migration must be prevented. F73006B090G050 is installed using a M0.9X0.175 thread. F73006B090G050 combines a pitch of 1.27 mm / 50 mil with tip style 06 (Serrated stepped) and a tip diameter of 0.9 mm. Spring force is 50 cN at a nominal travel of 4 mm.
-
Product
Basic Contact Probes (138 Mil) F78514S230L300L
1003144
-
The Basic Contact Probes (138 mil) F78514S230L300L is a highly specialized component designed for precision applications across various industries. With a pitch of 3.50 mm (138 mil), these probes are engineered to function effectively in extreme environments, boasting an operational temperature range from -45°C to +80°C. The probe's design is complemented by its robust mechanical structures, including a preload of 80 cN and a spring force of 300 cN, ensuring reliability under different conditions. The outstanding pointing accuracy of ±0.10 mm further enhances its functionality in precise measurement setups.
-
Product
Step Probes (F733SP) F73316B1080G300SP1
1000899
-
The Step Probes (F733SP) F73316B1080G300SP1 is engineered for precision and reliability in demanding environments, capable of operating at temperatures ranging from -45°C to +100°C. With a pitch of 4.00 mm (157 mil), this probe is designed to provide consistent performance. Its robust construction includes a beryllium copper plunger plated in gold, ensuring superior contact integrity while mitigating oxidation. The barrel, also plated with gold, is fashioned from durable brass. The mechanical design features a preload of 60 cN, spring force of 300 cN, and a nominal travel capability of 4.00 mm, allowing for efficient and accurate probing of various electrical components.
-
Product
Hybrid Stepper Motors
-
Hybrid stepper motors from IMS are available in rotary sizes NEMA 11 (28 mm) through 34 (85 mm), and linear actuator sizes NEMA 17 (42 mm) and 23 (57 mm). These extremely robust, long-life motors carry out precise step-by-step movements that are controlled by a stepper motor drive, such as MForce, to comprise a stepper motor drive system.
-
Product
Basic Contact Probes (138 Mil) F77328B230G400
1001536
-
The Basic Contact Probes (138 mil) F77328B230G400 are essential components designed for high precision and reliability in various electrical applications. With a pitch of 3.50 mm (138 mil), these probes can operate effectively in extreme temperatures ranging from -45°C to +80°C. This makes them ideal for environments where stable performance is critical, thus ensuring consistent electrical connectivity. In terms of performance, these probes support a continuous current of 10.00 A with a typical contact resistance of just 25 mOhm, showcasing their efficiency. The mechanical specifications include a preload of 100 cN and a spring force of 400 cN, facilitating accurate measurements with a nominal travel of 4 mm and a maximum travel of 5 mm. Notably, the pointing accuracy of +/- 0.10 mm ensures that they deliver reliable performance for intricate applications. Constructed with high-quality materials, including a beryllium copper plunger with gold plating and a bronze barrel also plated with gold, these probes guarantee durability. The design incorporates a tip style diameter of 2.30 mm and a total length of 27 mm, making them compact yet capable. The Spring steel used for the spring material complements the overall durability, ensuring the probes can withstand regular usage while maintaining optimal performance.
-
Product
Basic Contact Probes (100 Mil) F77228B200G150
1001570
-
The Basic Contact Probe (100 mil) F77228B200G150 is engineered for precision and reliability in various technical applications. With a pitch size of 100 mil (2.54 mm), it ensures compatibility with standard connectors, making it an ideal choice for those needing a dependable probe for electrical testing. The design incorporates advanced materials such as beryllium copper for the plunger and nickel silver for the barrel, which not only enhance durability but also ensure optimal conductivity. This probe operates efficiently within a temperature range of -45°C to +80°C, catering to diverse environments where operational versatility is paramount.In addition to its robust construction, this probe features a variety of exceptional specifications including a continuous current capacity of 5.00 A and a typical contact resistance of 25.00 mOhm, ensuring minimal signal loss during operation. Its mechanical attributes, such as a preload of 60 cN, maximum travel of 5 mm and a pointing accuracy of +/- 0.08 mm, further demonstrate its precision engineering and attention to detail. Designed for high performance, the Basic Contact Probe not only meets but exceeds industry standards, making it a reliable tool for engineers and technicians alike.
-
Product
Open Flanges Test Rig
-
Flexible cell dimensions: cells of Ø 8 to Ø 80 mm (or square till 70x70 mm) can be successively installed Quick start of experiment: less than 20 minutes to remount a new cell with different dimension, thanks to the simple design without sealing Other SOFC components: the open flanges test rig is also useful for conductivity measurements (electrolyte, electrode material, interconnect etc.) and sealing tests End of broken cells and secure testing: the cell is squeezed by a soft alumina felt that prevents any damages, the excess fuel burns continuously in the alumina felt at the cell edges
-
Product
Standard 2.40 (68.00) - 6.20 (176.00) Battery Probe
BIP-8
Battery Probe
Current Rating (Amps): 5Average Probe Resistance (mOhm): 30Test Center (mil): 188Test Center (mm): 4.78Full Travel (mil): 90Full Travel (mm): 2.29Recommended Travel (mil): 60Recommended Travel (mm): 1.52Overall Length (mil): 396Overall Length (mm): 10.06
-
Product
Basic Contact Probes (100 Mil) F10033S090P200HPL
1010258
-
The Basic Contact Probes (100 mil) F10033S090P200HPL, also known by its order code 1010258, are meticulously engineered for precision and reliability in various electronic applications. Designed with a pitch of 2.54 mm (100 mil), these probes can withstand a temperature range from -45°C to +80°C, ensuring performance in challenging environments. With an additional definition of HPL, they embody the highest quality of contact technology, making them ideal for critical measurements and connections.Engineered for excellence, these probes feature a continuous current rating of 5.00 A and a typical contact resistance of just 40.00 mOhm, enabling efficient electrical connections. The mechanical specifications highlight a preload of 130.00 cN and a spring force of 200.00 cN, providing stability during operation. With a nominal travel of 4.30 mm and a maximum travel of 6.40 mm, these probes guarantee precise positioning, enhanced by a pointing accuracy of +/- 0.08 mm. The dimensions align with industry standards, being 35.40 mm in total length and designed to fit seamlessly into existing setups, while the use of high-quality materials such as steel for the plunger and gold plating for the barrel ensure durability and optimal performance.
-
Product
Basic Contact Probe F03918S050M030
1176284
-
The F03918S050M030 Basic Contact Probe is designed for optimal performance in electronic applications, providing reliable and consistent contact in various conditions. With a continuous current rating of 2.00 A and a typical contact resistance of just 150 mOhms, this probe ensures efficient operation and minimal energy loss. The robust mechanical design features a preload of 10 cN, a spring force of 30 cN, and impressive travel capabilities, offering a nominal travel distance of 2.00 mm and a maximum of 3.70 mm, delivering precision with a pointing accuracy of +/- 0.05 mm.
-
Product
Basic Contact Probe F73317B230G150
1005629
-
The F73317B230G150 Basic Contact Probe is engineered for precision and reliability, making it an essential tool in various electrical applications. With a temperature range of -45°C to 100°C and a continuous current capacity of up to 10A, this probe is designed to maintain performance under challenging conditions. The carefully crafted design features a compact form factor with a total length of 28.30 mm and an accuracy of ±0.10 mm, ensuring that users can achieve the precise measurements necessary for their specific tasks.
-
Product
P2757 General Purpose Probes
General Purpose Probe
Current Rating (Amps): 20Average DC Resistance lower than (mOhm): 10Test Center (mil): 187Test Center (mm): 4.75Full Travel (mil): 230Full Travel (mm): 5.84Recommended Travel (mil): 167Recommended Travel (mm): 4.24Overall Length (mil): 1,210Overall Length (mm): 30.73Overall Length Remark: Tip 2C: 1140 mil (28.96 mm) Tip 1W: 1205 mil (30.61 mm) Tip 2W: 1205 mil (30.61 mm)
-
Product
Push Back Probes (V04) V0417B180G15
1015843
-
The Push Back Probes (V04) model V0417B180G15 is designed for precision applications, offering exceptional performance across various parameters. With a pitch of 4.00 mm and a temperature operating range from -45°C to +100°C, these probes are ideal for demanding environments. Its durable construction ensures reliability, featuring a beryllium copper plunger coated in gold, and a brass barrel also plated in gold. These materials contribute to the probe’s longevity and functionality under rigorous conditions.
-
Product
Splashproof Cover
Model IPC
-
Model IPC Splashproof Cover adds protection to IP67 / NEMA-4X from the front panel. It fits all of Laurel's 1/8 DIN instruments as well as 1/8 DIN instruments by other manufacturers, provided that instrument dimensions in front of the panel do not exceed 48 x 96 x 15 mm (1.89" x 3.78" x 0.59").
