-
Product
Electronic Ammeters
-
The device puts out a voltage that is proportional to a magnetic field to which it is exposed.
-
Product
Joint Services Electronic Combat Systems Tester
JSECST™
-
The Joint Services Electronic Combat Systems Tester (JSECST) is part of the family of testers, supporting the U.S. Air Force, Navy, Army, and over 23 allied nation platforms. JSECST performs full end-to-end diagnostic tests of installed systems including radar warning receivers (RWRs), jamming systems, communication systems, and navigation systems. Our JSECST delivers confidence for flight crews and the technicians who support them. It quickly and accurately tests and fault-isolates electronic combat and avionics systems for today's most advanced combat aircraft.
-
Product
Electronic Tire Tester
Model BTT-5700
-
The Branick BTT-5700 was created from the ground up to be the most efficient, durable and reliable electronic tire tester available. The electronic detector accurately locates flaws that may be missed using conventional methods. A visible spark occurs at the site of a flaw and the rotation stops to allow the flaw to be marked. The adjustable height platform reduces physical strain that can often lead to workers compensation claims. The BTT-5700 also features a bi-directional variable speed electric rotation motor that is whisper quiet. The auto extend/retract ramp makes tire loading easy. Hand controls are located on a locking swing arm that can be adjusted in seconds. Four air tool ports and two electric outlets are also provided so any needed tools can be kept close for improved efficiency. A high power LED light and Medium Truck Probe are also included. All probe heads require only the push of a button to change and are available to fit all common tire sizes. And, like everything from Branick, it's made in the USA.
-
-
Product
Real-Time X-Ray Imaging and Variable Pressure Scanning Electron Microscope
-
Trialon has the equipment and experienced staff to operate this highly technical piece of laboratory equipment. Our state-of-the-art materials analysis lab located in Auburn Hills, MI is managed by a Ph.D with over 20 years of hands-on experience in root cause failure analysis of design, material and process for current and future products.
-
Product
Electronic AC/DC Voltage Tester
ET60
-
The ET60 voltage tester requires no batteries as it measures AC/DC voltage up to 600V in electrical circuits, outlets, light fixtures and anywhere else AC/DC voltage testing is required.
-
Product
Compact Low Profile Load Cell
1000 Series
-
Compact Low Profile load cells are fully stainless steel, hermetically sealed load cells with a multi-beam internal structure, and fully integrated electronics to provide high level analog or digital outputs. This type of load cell is easy to use for measuring tension or compression loads from 200N (50lb) to 5kN (1000 lb), and is capable of rejecting side forces that would otherwise affect accuracy. This type also offers the user the ability to set the gain and offset (span and zero) electronically, to provide maximum flexibility for the user application.
-
Product
Air Core Line & Load Reactors
-
Line and load reactors are generally serial-connected to the input and/or output terminals of three phase equipment such as motor speed controllers, inverters and UPS systems. These equipment make use of semiconductor switches such as IGBTs, thyristors, and diodes and therefore create harmonic distortion and high switching over-voltages (dv/dt). Use of such equipment has been becoming more widespread as the technology advances. However, the negative effects of these equipment should not be overlooked.
-
Product
Battery Extra Load Units
-
Performing capacity/discharge test on a high-capacity battery may be challenging since high requirements are set on the discharge system. In cases when discharge test times need to be reduced, high load capacities are required from the discharge system. The battery extra load unit BXL is an additional load unit designed especially for this purpose.It is primarily used with BLU battery testers. However, the unit is a universal add-on device. This means it can be used as an additional load with any other discharge/capacity tester in the market.When discharge current exceeds the capacity of a single BLU device, extra load unit increases discharge capacity. A system of BLU and BXL instruments enables performing the capacity test in an accurate, user-friendly way in accordance to battery testing standards: IEEE 450-2010, IEEE 1188-2005, IEEE 1106-2015, IEC 60896-11/22, and other relevant standards.
-
-
Product
Robotic Sample Loading Systems
-
Below you can see examples of two systems using our robotic sample loading system. Many other automated microscopy systems are possible using our components.
-
Product
Load Tests
-
For the production and quality assurance of electric motors and electric drive systems, the use of flexible and customer-specific testing technology is required. Vogelsang & Benning supplies the same to the needs and the application of the customer.
-
Product
Load Measuring Pins
-
Magtrol Load Measuring Pins are temperature-compensated transducers used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load.
-
Product
High Current Probes (Power Electronics) HCF73211B100G300
1006321
-
The High Current Probe HCF73211B100G300 is a specialized solution tailored for power electronics applications, designed to deliver reliable connectivity under demanding conditions. This Basic Contact Probe is engineered with specific dimensional and material requirements to ensure optimal performance, even in extreme temperatures ranging from -45°C to +200°C. Its robust design incorporates high-grade materials, including a beryllium copper plunger, ensuring durability and high conductivity, which are critical for precise electrical measurements in electronic circuits.
-
Product
Electronic Brake Meter
BrakeCheck
-
The Bowmonk BrakeCheck is a fully self-contained, portable, battery-powered brake meter that can be used by workshops, government traffic authorities, testing and inspection stations etc. to test and report on vehicle brake efficiency. The unit is MOT approved.
-
Product
High Current Probes (Power Electronics) HCB085A11MG4
1012158
-
The High Current Probes (Power electronics) HCB085A11MG4 is designed for robust electrical connections in various high-performance applications. This basic contact probe boasts a compact design with a total length of just 8.90 mm and a projection height of 4.90 mm, making it suitable for precise insertion and reliable contact. With a wide temperature operating range from -45°C to +200°C, the HCB085A11MG4 can withstand harsh environments while ensuring optimal performance. This probe features a nominal travel of 1.00 mm and a maximum travel of 1.20 mm, providing flexibility for different application requirements.
-
Product
Load Cell DIN Rail Signal Amplifier
LCD20
-
Our intelligent strain gauge bridge amplifier is a compact, stackable microprocessor based unit specifically designed to control and monitor process applications. Flexible connection to most load cells, pressure or strain gauges over a wide range of sensitivities. The unit provides isolated current 4-20mA and voltage 0-10V analogue outputs and two digital inputs. Two set point relays can be configured to set thresholds such as net, gross, peak and valley. Powered from a wide ranging DC supply, the DIN rail amplifier is supplied with 2 part screw connectors for ease of installation.
-
Product
Electronics
-
The analog electronics enable the linearization of the SQUID characteristics through negative feedback to the SQUID.
-
Product
High Current Probes (Power Electronics) HCF77214B130G300
1007945
-
The High Current Probes (Power electronics) HCF77214B130G300 are meticulously designed for high-precision applications within the power electronics sector. With a basic contact probe type, this model features a robust temperature tolerance ranging from -45°C to +200°C, making it ideal for various challenging environments. The design incorporates a pitch of 2.54 mm, allowing for effective integration into compact setups, ensuring it meets the demands of modern electronic applications.
-
Product
High Precision Flame-proof Compression Type Load Cell
ZR-KE
-
Flame-proof Compression Type Load Cell
-
Product
High Current Probes (Power Electronics) HCF77216B100G300
1005046
-
The High Current Probes (Power electronics) HCF77216B100G300 is engineered for high precision and reliability in demanding electronic applications. This basic contact probe showcases remarkable capabilities with a design that facilitates a pitch of 2.54mm, ensuring seamless integration into various setups. Designed to operate within a temperature range of -45°C to +200°C, this probe is robust in extreme conditions, offering a continuous current capacity of 20.00 A and a typical contact resistance of just 10.00 mOhm, making it ideal for optimal power delivery.Constructed from premium materials, the probe features a beryllium copper plunger with a gold plating that enhances conductivity and performance. The brass barrel also benefits from gold plating, further ensuring longevity and reliability. With precise mechanical specifications, including a preload of 50.00 cN and a maximum travel of 5.00 mm, the HCF77216B100G300 is adept at maintaining accuracy with a pointing accuracy of +/- 0.08 mm. This is complemented by various accessories designed to facilitate its usage, making it a versatile choice for professionals in the field of power electronics.
-
Product
DC Load Banks
Custom DC Units
-
Mosebach Manufacturing Company
Mosebach has been building DC load banks for over 30 years. We have a wide range of custom-designed units. Please give us a call at 1-866-629-4328 to discuss your needs.
-
Product
load cell
EST-40
-
Technopark Automation & Control
The EST-40 is an 'S' type load cell suitable for use in tension and compression and is popular on hopper, tank weighing, belts scale and process weighing applications. It is low cost and is available in capacities from 50 kg to 2000 kg.
-
Product
High Current Probes (Power Electronics) HCF73512A300U300
1035757
-
The High Current Probes HCF73512A300U300 are precision-engineered contact probes designed for power electronics applications. With a continuous current rating of 50A and a temperature range of -45°C to +200°C, these probes are well-suited for high-performance environments. The unique design incorporates a basic contact probe configuration, ensuring reliable electrical connections with a typical contact resistance of just 5 mΩ. This capability makes them ideal for demanding electronic applications where precision and reliability are paramount.
-
Product
AC Load Bank (Resistive & Inductive)
K-1000 Resistive & Inductive
-
Kongter Test & Measurement Co., Limited
Kongter resistive & inductive AC load banks are used to simulate the motor loads or other electromagnetic devices working at their rated power factor. Many backup generators and turbines are rated at 0.7, 0.8 or 0.85 power factor and need to be commissioned at nameplate capacity using a combination of resistive and reactive load to fully qualify their operating capability. Using a resistive & reactive load bank enables comprehensive testing from a single unit.
-
Product
Load Washer
5000 Series
-
The Load cell is a stainless steel sub-miniature strain gage based transducer with compensated temperature performance. This type provides measurements up to 20000 lbf with better than ±0.5% (full scale) non-linearity
-
Product
High Load Shear Strength Tester
HLST1000
-
This tester measures the shear force required to analyze the bonding strength of various bonding materials. It is possible to measure shear force up to 5000N for the purpose of bonding strength evaluation over a large area. An optional heating unit enables evaluation while the sample is heated.
-
Product
Motor Test Bench For No Load Test
-
The testing equipment is extensively used in industries for testing of motors under no load conditions.
-
Product
High Current Probes (Power Electronics) HCF77306B300G150
1009398
-
The High Current Probes (Power electronics) model HCF77306B300G150 is specifically designed for high-performance applications in demanding environments. With a robust operating temperature range of -45°C to +200°C, this basic contact probe excels in reliability and performance under extreme conditions. The probe features a compact design with a pitch of 3.50 mm, making it suitable for various integration needs in power electronics.
-
Product
High Current Probes (Power Electronics) HCF73307B300G300
1012453
-
The High Current Probes (Power electronics) HCF73307B300G300 are meticulously designed for precision and reliability in high-performance applications. With a robust continuous current rating of 30A and a contact resistance of just 8 mOhm, these probes are ideal for various electrical testing scenarios requiring accurate measurements under demanding conditions. Their operational temperature range of -45°C to +200°C makes them suitable for diverse environments, ensuring consistent performance across applications.These probes boast a mechanical design that emphasizes durability and precision. Featuring a preload of 60 cN and a maximum travel of 5 mm, they come equipped with a M2 thread and a range of dimensions that facilitate easy integration into existing systems. The tip style, crafted from beryllium copper and plated with gold, ensures low resistance and high reliability, making these probes essential tools in both laboratory and field settings.
