-
Product
Low Voltage Detectors
LVD-15
-
Standard Electric Works Co., Ltd
Bright LED and audible alarm sound when voltage is present. Designed for non-contact voltage detection. Can be used to find a break in a wire. Flashlight function. ON/OFF switch for longer battery life.
-
Product
Low G Sensitive Oscillators
-
Precision Test Systems is increasingly becoming a world leader in ultra-low phase noise (ULN) crystal and rubidium oscillators. We manufacture the CFS10B crystal frequency standard and the RFS10E and RFS10F rubidium frequency standards. All these models can also be locked to the global satellite service operated by the USA (GPS), Russian (GLOSNASS) and Europe (Galileo). We also have a complete range of distribution amplifiers to compliment these frequency standards.
-
Product
Low & High Voltage Differential Probes
T3
-
Teledyne Test Tools Low & High Voltage Differential Probes offer end user versatility with all models powered by an external universal power supply and work with any Oscilloscope with a high-impedance BNC input. The range consists of one Low Voltage and three High Voltage models with varying bandwidths to satisfy a wide array of customer applications.
-
Product
Low Current Probe 80A
695
-
Great tool for accurate measurement of low current. Use with your graphing meter or lab scope to view current waveforms on fuel injectors, fuel pumps, primary ignition coils and more. Also works very well with digital multimeters. Resolution of 10 milliamps is low enough for most parasitic drain testing. In addition, the clamp opening of 1/2 inch is large enough to clamp over most negative battery cables for those parasitic drain tests.
-
Product
Radio Frequency Probes (Industrial) HF860BNCf014G550MCXfP
1032634
-
The HF860BNCf014G550MCXfP Radio Frequency Probe is engineered for precision and reliability in industrial applications, featuring a coaxial design that ensures minimal signal loss. With a robust operating temperature range from -45°C to +100°C, this probe is well-suited for environments that demand resilience against extreme conditions. It supports a continuous current of 10A and can operate effectively at frequencies up to 4GHz, making it a highly adaptable tool in high-frequency testing scenarios. The mechanical attributes of the HF860 probe include a total length of 44.9mm and a maximum travel of 5mm, allowing for versatile usage across various devices. The meticulously crafted construction from high-grade materials such as beryllium copper and brass, plated with gold, enhances durability and conductivity. Additionally, the inclusion of a plug connection type ensures a secure and efficient attachment. This probe stands out in the market for its combination of technical performance and quality craftsmanship, making it the go-to choice for professionals in the field.
-
Product
LXI EMR Low Thermal EMF Matrix 56x33
60-511-001
Matrix Switch Module
This high density 1-pole matrix has excellent thermal stability and substantially reduced thermal EMF figures when compared to a conventional switching matrix.
-
Product
Rubidium Frequency Standard
RFS VXI
-
*RFS VXI is designed to work as part of information measuring systems based on the VXI bus as a rubidium frequency standard.*RFS VXI is intended for use as a highly stable laboratory signal source for checking generator devices, time-frequency measuring equipment and other equipment, synchronizing navigation systems.*The RFS VXI contains two independent rubidium reference oscillators: main and standby.*RFS VXI is a VXI standard, register based device and measures C-1.*RFS VXI implements the "Self-control" mode, which checks the output frequencies of the rubidium standard.
-
Product
Components - Low Noise Amplifiers (FLNA)
FLNA series
-
Farran's FLNA series low noise amplifiers are constructed with discrete or MMIC pHEMT devices that operate over the frequency range 18 to 110 GHz. These amplifiers are specifically designed for low noise applications.The amplifiers are offered in two categories: standard and custom-built. The custom-built amplifiers are offered in various RF interfaces, including standard waveguide or coaxial connectors, for convenient system integration.
-
Product
Low cost Multimeter
DMM 125
-
7 Functions, 27 Ranges. Auto and manual ranging. 34 Segment fast bargraph. Auto Power OFF to save battery. 10 Amps and mA DC/AC fuse protected
-
Product
LXI Low Thermal EMF Matrix 1-pole 28x33
60-510-003
Matrix Switch Module
The 60-510 is a high density 1-pole matrix module controlled via LXI. It has excellent thermal stability and substantially reduced thermal EMF figures when compared to a conventional switching matrix. Typical applications include signal routing in ATE, selecting thermocouple inputs, switching amplifier gain circuits and high accuracy DC micro-volt measurements. Ruthenium reed switches are used because of their good low level switching capability. They also have a very long life with excellent contact resistance stability, minimal wetting current and low thermal offset.
-
Product
Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfS
1035672
-
The Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfS are meticulously designed to meet the specific needs of automotive applications, making them a crucial tool for any professional in the field. Designed with a robust coaxial probe structure, these RF probes incorporate advanced materials such as beryllium copper and brass, ensuring exceptional durability and performance in various environmental conditions. They can operate effectively within a temperature range of -45°C to +100°C, making them suitable for both extreme temperatures and demanding applications.
-
Product
LXI Low Thermal EMF Matrix 1-pole 56x33
60-510-001
Matrix Switch Module
The 60-510 is a high density 1-pole matrix module controlled via LXI. It has excellent thermal stability and substantially reduced thermal EMF figures when compared to a conventional switching matrix. Typical applications include signal routing in ATE, selecting thermocouple inputs, switching amplifier gain circuits and high accuracy DC micro-volt measurements. Ruthenium reed switches are used because of their good low level switching capability. They also have a very long life with excellent contact resistance stability, minimal wetting current and low thermal offset.
-
Product
Low Capacity Single Point Bending Beam Load Cells
LSP SERIES
-
The LSP Series is a low capacity, low cost, high accurate single point bending beam load cell. It is ideal for OEM applications such as electronic scales and weighing machines. The single point design is highly resistant to eccentric loading allowing direct mounting to the scale base and weighing platform. The LSP Series features a moisture proof sealant.
-
Product
Enabling Low Power, High Reliability, And High Performance Design
Lattice Nexus Platform
-
The Lattice Nexus FPGA platform combines Lattice’s long-standing low power FPGA expertise with leading 28nm FD-SOI semiconductor manufacturing technology. With this platform, Lattice enables the rapid development of multiple device families that deliver low power, high performance, high reliability and small form factor.
-
Product
Radio Frequency Probe HF860PCBCO016G530MCXfSV2
1038941
-
The HF860PCBCO016G530MCXfSV2 Radio Frequency Probe represents an optimal choice for precision measurements in various applications, particularly in consumer electronics. With a robust design characterized by a coaxial probe configuration, it offers enhanced performance across multiple frequencies, specifically designed to meet the demands of high-frequency applications up to 6 GHz. This probe provides excellent connectivity thanks to its MCX female connection type, ensuring reliable interfacing with various RF components.
-
Product
Low Voltage Regulation
-
The low voltage regulation system LVRSys represents a cost effective alternative for grid expansion. The economic use is recommended in all low voltage grids where short-circuit power is sufficient, but have voltage maintenance problems.
-
Product
Radio Frequency Probes (Industrial) HF860SMAf018G990MCXfS
1038922
-
The Radio Frequency Probes (Industrial) HF860SMAf018G990MCXfS is designed for high-performance applications requiring precise measurement capabilities. With a pitch of 6.50 mm, this probe efficiently operates within a temperature range of -45°C to +100°C, ensuring reliability even in extreme conditions. Its superior electrical specifications, including a continuous current rating of 10 A and an impedance of 50 ohms at frequencies up to 8 GHz, makes it a vital tool for various industrial applications. The probe's construction utilizes premium materials such as gold-plated brass and beryllium copper for enhanced durability and conductivity, ensuring minimal signal loss and high accuracy during measurements.
-
Product
Low Cost Microwave Wideband PIN Preamp Receivers
MR21 (40KHz~18GHz)
-
Hangzhou Huatai Optic Tech. Co., Ltd.
MR21 series microwave wideband optical receiver, adopts High linear PIN diode and Low noise pre-amplifier IC, within bandwidth of 40KHz~18GHz, they are featured with excellent linearity, high responsibility and superior flatness of the RF response in both, power and phase. They provide an outstanding linearity fiber optical communication for analogue wideband microwave application. Due to avoidance of using expensive coaxial cable or wave guide, there will be no limitation in transmission distance, which improves the signal quality and reliability of the microwave communication. They can be widely applied in microwave communication system such as remote wireless, timing and reference signal distribution, telemetry, measurement and delay line etc as well as 10Gb/s and 18Gb/s high speed communication system.
-
Product
Radio Frequency Probes (Automotive) H860FL
1020933
-
The Radio Frequency Probes (Automotive) H860FL is designed with precision in mind, offering a pitch of 9.00 mm (354 mil) which optimizes its performance in automotive applications. This model is equipped to handle a continuous current of 10.00 A, making it a robust choice for demanding environments. The total length of the probe measures 22.00 mm, with a press ring diameter of 8.50 mm and an outer diameter of 8.00 mm, ensuring compatibility and ease of integration into various automotive systems.
-
Product
Radio Frequency Probe TC-P 201 008 RJ 45
1021620
-
The TC-P 201 008 RJ 45 Radio Frequency Probes are designed for high-performance applications, providing reliable connectivity and precision in data transmission. With an optimal continuous current rating of 1.50 A, these probes ensure that electrical signals are transmitted efficiently while maintaining low contact resistance, measured at only 20 mOhm. This combination makes the TC-P 201 008 ideal for various consumer electronics applications, where both performance and reliability are paramount.
-
Product
High Frequency Probe HF77KETMINIFAKRAm0412G1080MSMPmF
1109577
-
The High Frequency Probe HF77KETMINIFAKRAm0412G1080MSMPmF (item number 1109577) is designed for reliable transmission of high-frequency signals in test and measurement applications. With a defined impedance of 50 Ω, HF77KETMINIFAKRAm0412G1080MSMPmF supports controlled signal routing and helps minimize reflections and signal loss at the test interface. The frequency range of HF77KETMINIFAKRAm0412G1080MSMPmF extends up to 12 GHz, and this version is intended for contacting KET MINI FAKRA connectors. On HF77KETMINIFAKRAm0412G1080MSMPmF, spring forces of 420 cN on the outer contact and 120 cN on the inner contact provide defined mechanical contacting.
-
Product
High Frequency RF and Microwave USB Programmable Signal Generators
LMS Series
-
The Lab Brick LMS series of high frequency RF and microwave USB-compatible, synthesized signal generators cover a frequency range from 0.5 MHz - 20 GHz with low noise, fast 100-microsecond switching time, and fine 100 Hz frequency resolution. They require no additional DC supply voltage and offer advanced features such as phase-continuous linear-frequency sweeping, internal/external 10 MHz reference, and optional pulse modulation. GUI software can track and control several connected signal generators, simplifying multiple-signal test setups. Each device stores settings in internal memory, allowing it to power up in a specific instrument state.
-
Product
High Low Temperature Test Chamber
-
The high low temperature test chambers from Weiber are climatic test chambers, designed to simulate highly precise high and low temperature environments for the testing of electrical and electronics items, metallic products, automobile parts, food items, biological samples, chemicals, building materials and other wide variety of processed and packaged goods. These test chambers find widespread usage in manufacturing units, quality control units and scientific research organizations and are commonly employed for heat endurance test, cold endurance test and humidity and dryness endurance tests of products. These tests help in determining the product performance in specific environments and also help in identifying any manufacturing flaws and in determining its stability and shelf life.
-
Product
Radio Frequency Probe HF830PCBCC018G500MCXfP
1090027
-
The HF830PCBCC018G500MCXfP Radio Frequency Probe is engineered for superior performance in various testing environments. This double coaxial probe showcases a unique design that delivers optimal connectivity and precision in measuring radio frequencies. With a temperature tolerance ranging from -45°C to +100°C, this probe is capable of enduring diverse operational conditions, ensuring reliability in critical applications.
-
Product
Frequency Meter up to 330 GHz
-
Frequency meter is intended for measuring frequency in range 70-330GHz.The Frequency Meter is based on sweepable heterodyne receiver. Fully outomated system allows to measure frequency without preslection frequency range.This solution is ideal for laboratory test measurement.
-
Product
K-50 Series Probes
High Frequency Probe
The K-50 coaxial probe provides an instrumentation-quality interface for broadband R.F. measurements up to 4 GHz. With the K-50 R. F. circuit design, impedance characterization measurements can be performed using it as a Network Analyzer port-extending accessory. Accurate and repeatable small signal and R.F. power (50 Watts) measurements provide consistent and repeatable results.
-
Product
UV SHG Cavity Compact Frequency Quadrupling Module
SolsTiS ECD-X-Q
-
SolsTiS ECD-X Q extends the range of the SolsTiS platform into the deep UV providing unrivalled power and tuning. SolsTiS ECD-X-Q is used in combination with the ECD X doubling cavity (wavelength ranges between 210–250 nm) or the EMM mixing module (wavelength ranges between 250–300 nm).
-
Product
High Frequency Chambers
-
Specialized, shielded rooms designed to absorb electromagnetic reflections.
-
Product
Millimeter-wave Operation With Frequency Extenders For P50xxA Streamline VNA
S97560B
Vector Network Analyzer
Configure an affordable millimeter-wave banded VNA using P50xxA Streamline USB VNAs with this software
-
Product
Radio Frequency Probe HF77HFMf0212G1080MSMPmF
1114067
-
The HF77HFMf0212G1080MSMPmF Radio Frequency Probe is specifically designed for automotive applications, ensuring precise electromagnetic measurements. Its impressive operational temperature range, from -45°C to +100°C, makes it ideal for varied environmental conditions typically found in the automotive sector. Incorporating advanced coaxial design, this probe boasts a frequency capability of up to 12 GHz, and its 50-ohm impedance ensures optimal signal integrity.
