Product

Cable Sheath Testing and Fault Location System

Shirla

-

BAUR

Shirla - BAUR

Cable fault location with the BAUR shirla. Shirla the fault location system is used for cable and cable sheath testing as well as for pre-location and pinpointing of cable faults. The pre-location based on the measuring bridge principle according to Murray and Glaser that is designed especially for power cables, also enables pre-location for control and lighting cables. Null balance and evaluation take place automatically.* Cable and cable sheath testing up to 10 kVC* Resistance measurement* Cable and cable sheath fault pre-location with precision measuring bridge* Adjustable cable sections that can be defined with length, conductor cross-section and material respectively and can be considered in the distance calculation

Product

Traveling Wave Fault Locator

XC-2100E

-

Scope T&M Pvt, Ltd.

XC-2100E - Scope T&M Pvt, Ltd.

XC 2100E, a Fault Location System based on principle of travelling wave detection is the solution to above problem. It can detect not only permanent fault, but also transient fault within one tower span accuracy (with best accuracy of ±50 meters). It is a kind of Line Monitor for continuous monitoring of transmission lines and gets triggered whenever travelling waves are generated on line due to switching, lightening or fault.

Product

Fault Locator

VM-510FFL+

-

Vivax-Metrotech Corp

VM-510FFL+ - Vivax-Metrotech Corp

Finding the location of an underground cable fault just became easier with the VM-510FFL+ Standalone A-frame locator. Now locating a suspect cable and finding the fault can be done with the VM-510FFL+ and a compatible transmitter. There is no longer a need for a separate utility locator with cables connecting to it. After connecting a compatible transmitter to the line and placing it in a Fault-Find mode, use the simple to operate four button controls of the VM-510FFL+ to locate and stay on the cable path while pinpointing the sheath or ground fault.

Product

Voyager Intermittent Fault Detector

-

DIT-MCO International

DIT-MCO International

The Voyager includes a spread spectrum TDR so that the fault can be located. Once an intermittent is detected, the TDR is immediately connected to the failed test point and used to determine the distance to the fault.

Product

Power Quality Measurement & Digital Fault Recording

-

KoCoS Messtechnik AG

KoCoS Messtechnik AG

In view of the growing number of factors with a disturbing influence on power systems and the ever increasing sensitivity of devices and installations on the consumer side, simple monitoring criteria such as undervoltage or overcurrent are no longer adequate. Reliable registration of all the relevant processes within the electrical power system calls for constant observation of a wide variety of derived parameters, such as individual harmonic content, system unbalance and interharmonics, and the swift identification of even slight deviations from the norm.

Product

Fault Location

REFLEKT

-

Kelvatek Ltd.

REFLEKT - Kelvatek Ltd.

REFLEKT makes fault location more efficient, effective and practicable than ever before, even on complex networks.

Product

RS-485/RS-422 Fault Protected

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Renesas' fault protected RS-485/RS-422 transceivers, also known as overvoltage protected transceivers (OVP), offer robust fault tolerance and high performance.

Product

Cable Fault Locator ECFL 30

ECFL 30

-

Elektronika

ECFL 30 - Elektronika

Compact precision active/passive, AC/DC bridge with dual channelTDR for fault location on balanced loaded and unloaded cables.

Product

Fault Locator

TRANSFLEKT

-

Kelvatek Ltd.

TRANSFLEKT - Kelvatek Ltd.

TRANSFLEKT simplifies the location of transient faults on the low voltage distribution network.

Product

Visual Fault Locator

FFL-310-U

-

Radiantech, Inc.

FFL-310-U - Radiantech, Inc.

FFL-310-U Visual Fault Locator is equipped with a 650 nm high power visible laser diode,can be operated in -CW (continuous) or … MOD (1Hz modulation) mode. There is one LED indicator：with RED or GREEN light; the RED one shows the operating mode of the laser diode output signal, and the GREEN one indicates low battery level. FFL-310-U is designed in a card-size dimensions.

Product

Detector of Earth Faults on Multi/Single-Core Terminations

CableTroll 2320

-

Nortroll

CableTroll 2320 - Nortroll

CableTroll 2320 is an indicator for detection of Earth faults (PtG) and short circuit (PtP) faults on multi-core and single core cable terminations. The unit uses NorTroll type current sensors.

Product

Cable Fault Locator-TDR

TM800N

-

T&M Tools Limited Co

TM800N - T&M Tools Limited Co

TM800N Cable Fault Locator (hereinafter to be referred as TM800N) is used for test est cable break, short circuit faults of telephone cable, data cable, high frequency cable, coaxial cable,and so on.

Product

Fault Passage Indicator for Lines

LineTroll R400D

-

Nortroll

LineTroll R400D - Nortroll

LineTroll R400D Fault Indicator indicates earth- and short-circuit faults and can distinguish between permanent and transient faults. The indicator has two sensors and use both the electrical field and the magnetical field to detect faults on all three phases.

Product

Fiber Visual Fault Locator

-

Huihong Fiber Inc

Huihong Fiber Inc

Fiber visual fault locator is a pen type device which is able to locate the breakpoint, bending or cracking of the fiber glass,this small fiber optic equipment can locate the fault of OTDR dead zone and make fiber iIdentification from one end to the other end .

Product

Mission Critical, Fault Tolerant Power Supplies

Series HSF

-

Kepco, Inc.

Series HSF - Kepco, Inc.

- Hot-swappable plug-in power supplies.- Designed to be combined in an N+1 fault-tolerant power system.- Front panel voltage adjustment trimmer for adjustment of output voltage.- Built-in forced current sharing and or-ing diodes.- May also be used independently as a multi-output power supply.- Designed to be sustainable - new models are backward compatible with existing racks.- Available in 1U and 3U sizes. Mounts in 19-, 23-, and 24-inch equipment racks.- All models include power factor correction (PFC).- Full service customized DC power distribution systems can match power supply output(s) with your load(s).- I/O connections via 24 pin connector that plugs into rack adapter. External connections are made via rack adapter.- Surface mount technology permits minimum mounting space.- Entire RA 19 racks populated with HSF power supplies can be connected in parallel, parallel-redundant or series.- HSF are CE Marked per per the LVD, EMC and RoHS 2 Directives. See applicable Declaration of Conformity.- Compliant with UL 8750, Standard for LED Equipment,- Watch video of NEBS GR-63-CORE earthquake and office vibration testing.

Product

Technology Insertion

-

ARC Technology Solutions

ARC Technology Solutions

Technology insertion allows customers to seamlessly integrate new, higher performance hardware technologies while retaining form, fit and function and application software compatibility.Over that time, application requirements change and grow – demanding greater computing horsepower. In recognition, we have put technology insertion at the heart of our product design, enabling our customers to leverage new levels of capability at lower cost and with minimal disruption.

Product

Cable Fault Testers

-

Greenlee Tools

Greenlee Tools

*Compact and lightweight solution for underground cable testing*DC Hi-Pot test of de-energized, shielded underground primary cable*No external power required - self-contained 8kVDC voltage source*Can be used up to a distance of 1500 ft (457m)*Clear and simple test results - analog bar graph and indication of good or faulted cable*Safety feature - measures AC voltage before converting to a DC voltage tester*Lightweight, single hot stick operation for testing cable

Product

Fault Simulation

Concurrent Fault Simulator

-

Syntest Technologies

Concurrent Fault Simulator - Syntest Technologies

TurboFault combines high performance, versatility and accuracy. It is highly competitive with hardware accelerators for classical test fault grading. It supports synchronous and asynchronous designs at the gate level, including tri-state gates, latches, flip-flops, single and multi-port RAMs, complex bus resolution functions, and User Defined Primitives (UDPs).

Product

Electrical Fault Detector

-

Aquila Engineers Pvt. Ltd.

Aquila Engineers Pvt. Ltd.

Our product range includes a wide range of Electrical Fault Detector and 0.36W Electric Fault Detector.

Product

Insertion & Extraction Tools

-

Equip-Test Kft.

Equip-Test Kft.

Press-in - pull-out - screw-in - screw out - easy maintenance.

Product

Voyager Intermittent Fault Detection Tester

-

Copernicus Technology Ltd

Copernicus Technology Ltd

This family of testers is available as the portable VIFD™ tester (previously called the Ncompass-Voyager) with 128, 256 or 512 test points, and it is available as a 19” rack-mount system – the IFD & Isolation System (IFDIS™) – with thousands of test points.  Testers are available from Copernicus Technology for purchase or lease.  Alternatively we can provide the full test service for you and we also provide all the corresponding test accessories listed under the Test Equipment menu button.