Product

High Voltage Programmable DC Power Supplies

-

TDK-Lambda Corp.

TDK-Lambda Corp.

High Voltage Programmable DC Power Supplies

Product

Linear DC Power Supply

MPS-5 Series

-

Matrix Technology Inc.

MPS-5 Series - Matrix Technology Inc.

The five-channel programmable DC power supply is a new generation of high quality programmable linear DC power supply. The five channels can independently adjust the voltage and current. This series of products are equipped with RS232 communication interface, which has both desktop and system characteristics, and can be arbitrarily matched with other instruments, integrated as a test system with special functions to complete the measurement requirements in different occasions. The Upper computer program can be edited through the communication protocol, which brings great convenience to the user. It is a replacement product of the ordinary programmable power supple and has a high cost-effective advantage.

Product

Programmable Switching DC Power Supply

SPS5000X Series

-

SIGLENT Technologies

SPS5000X Series - SIGLENT Technologies

The SPS5000X-Series is a programmable Switching DC Power supply series that provides a wide range of output power using single-channel and multi-channel output configurations coupled with constant power capability. The series of power supplies includes sixteen models  with voltages to 160 VDC and power to 1080 W. The SPS5000X supplies can be connected in series (2 units) or in parallel (3 units) to meet the requirements of 0~320V and 0~270A, with a maximum combined power of 3240W.

Product

DC Power Supplies

SGe Series

-

AMETEK Programmable Power, Inc.

SGe Series - AMETEK Programmable Power, Inc.

The SGe is an economical, FET based, high switching speed, programmable, dc power supply alternative to SCR and IGBT based dc supplies.

Product

DC Turbo Power Supplies

RKT Series

-

MATSUSADA Precision Inc.

RKT Series - MATSUSADA Precision Inc.

RKT series power supply is programmable DC power supply with distinctive turbo function which realises 4-5 times wider coverage of output voltage and current in comparison to conventional DC power supply of equivalent output power.You can apply to wide usage with only one unit but no need to apply power supplies with extra margin for output voltage and current because each unit can output voltage and current flexibly within the range of 400W, 800W and 1600W.

Product

DC Electronic Load

Model - KM-mPD-501

-

Kusam Electrical Industries Limited

Model - KM-mPD-501 - Kusam Electrical Industries Limited

KM-mPD-501 DC electronic load mainly focuses on the testing of power circuit on PCB. KM-mPD-501 offers a solution for function test of Switch step up, Stepdown, Regulators and Driver IC . Engineer puts components, such as CPU, DSP, FPGA; etc on a PCB after the power circuit has been tested. It’s not complete to use a meter to measure the voltage. KM-mPD-501 offers engineer OVP, OCP and OPP functions that help engineer know the value of overload current . On the other hand, engineer can use a programmable DC power supply (mPP series) to offer external power and connect PCB’s output to KM-mPD-501. Then engineer can easily get output watt, figure out the efficiency of power circuit and check if inductances, capacitances and resistances perfectly work with the power circuit. KM-mPD-501 not only offers loading emulation of current but also provides OVP and OPP. User can use these functions to test solar power battery, rechargeable battery and motor driver. In school laboratory, KM-mPD-501 helps students do experiment on power circuit, linear circuit and driver circuit.

Product

VB-8034, 4-Channel, 350 MHz Bandwidth VirtualBench All-in-One Instrument

784343-11

-

NI

784343-11 - NI

4-Channel, 350 MHz Bandwidth VirtualBench All-in-One Instrument—The VB‑8034 combines a four‑channel, 350 MHz mixed-signal oscilloscope with protocol analysis, an arbitrary waveform generator, a digital multimeter, a programmable DC power supply, and digital I/O into a single device that integrates with your PC or iPad. The VirtualBench all‑in‑one instrument is simple and convenient and results in more efficient circuit design, debugging, and validation. The included software provides an interactive way to view all your measurements on a single screen and can be updated for free with software releases over time to continually add functionality and value to your VirtualBench. VirtualBench also tightly integrates with LabVIEW software to enable programmatic control and automated test sequences.

Product

DC Power Supply

PDS Series

-

Matrix Technology Inc.

PDS Series - Matrix Technology Inc.

This series of products is programmable DC switching power supply with high accuracy and single output. It is light and compact, adjustable in voltage and current, and has multiple operating modes. The whole system is completely controlled by the microporcessor (mou), and can easily use the communication interface (re-232) to connect with the computer (PC) to meet the user's requirements for automatic testing and automatic control. The software instructions are completely in accordance with the scpi command. The format makes it easy for users to develop automatic test and automatic control applications. Due to the full digitalization of the system, the data input is completely controlled by the keyboard and knob, which is fast, accurate, and convenient. Can be widely used in electronic product development, device testing, communications industry, laboratories and scientific research institutions.

Product

FaithTech FTL 3000 Series Bench Linear Triple Channel DC Power Supply

FTL 3000 Series

-

Shenzhen FaithTech Technology Co., Ltd.

FTL 3000 Series - Shenzhen FaithTech Technology Co., Ltd.

FTL 3000 series multichannel programmable Bench linear DC power supply provides high resolution, high accuracy and high stability. It also provides over voltage and over heat protection. It provides series and parallel operation modes with resolution up to 1mV/1mA.

Product

FaithTech FTG Series Modular High-power Programmable DC Power Supply (4~600kW)

FTG Series

-

Shenzhen FaithTech Technology Co., Ltd.

FTG Series - Shenzhen FaithTech Technology Co., Ltd.

FTG series programmable DC switching power supply, voltage range from 10V to 1500V, single current up to 12000A, single maximum power of 600kW. The first technology in China, it still maintains 0.1% control and measurement accuracy when working with high current, providing strong support for sensor testing, superconducting material testing, cable testing and other tests.

Product

Programmable DC Power Supply

IT6100 Series

-

I-TECH Electronic Co., Ltd

IT6100 Series - I-TECH Electronic Co., Ltd

IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.

Product

DC Power Supplies

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Programmable DC Power Supplies with advanced features for lab or rack-mounted applications.

Product

VB-8054, 4-Channel, 500 MHz Bandwidth VirtualBench All-in-One Instrument

785037-12

-

NI

785037-12 - NI

4-Channel, 500 MHz Bandwidth VirtualBench All-in-One Instrument—The VB‑8054 combines a four‑channel, 500 MHz mixed-signal oscilloscope with protocol analysis, an arbitrary waveform generator, a digital multimeter, a programmable DC power supply, and digital I/O into a single device that integrates with your PC or iPad. The VirtualBench all‑in‑one instrument is simple and convenient and results in more efficient circuit design, debugging, and validation. The included software provides an interactive way to view all your measurements on a single screen and can be updated for free with software releases over time to continually add functionality and value to your VirtualBench. VirtualBench also tightly integrates with LabVIEW software to enable programmatic control and automated test sequences.

Product

High Performance Programmable AC Power Supply

IT-M7700 Series

-

I-TECH Electronic Co., Ltd

IT-M7700 Series - I-TECH Electronic Co., Ltd

ITECH newly-launched IT-M7700 High Performance Programmable AC Power Supply combines intelligence and flexibility, breaks through the huge defects of the traditional AC power source, reduces the size to only 1⁄2 1U, maximizes space utilization. Built-in power meter and arbitrary waveform generator make it convenient to simulate various arbitrary waveform outputs. IT-M7700 is designed with advanced technologies of programmable AC and DC power supplies, and can be widely used in multiple fields such as power energy products, home appliances, industrial electronics, avionics, military and IEC standards testing.

Product

DC Power Supplies

-

Intepro Systems

Intepro Systems

Intepro Systems offers a wide selection of Auto-Ranging programmable DC Power Supplies. Each DC Power Supply are MOS-FET based, resulting in a high performance power stage that offers high speed slew rates and low output ripple.

Product

DC Power Supply

WPS Series

-

Matrix Technology Inc.

WPS Series - Matrix Technology Inc.

The WPS Series programmable DC power supply is a high-precision, wide range of voltage & current within the power rating of the power supply, full-featured high power density programmable DC Power Supplies. It can provide wide-range, low-ripple and stable DC output which is used for DC input products and components function testing and experimental simulation.

Product

Saluki SPS8 Series Programmable DC Power Supply (>100kW)

-

Saluki Technology Inc.

Saluki Technology Inc.

Saluki SPS8 series power supply is high performance single-output programmable DC power supply with communication interface, possessing the character of fast rise speed (the rise time of SPS811 power supply can be less than 10ms). The combination of bench-top and system features in these power supply provides versatile solutions for your design and test requirements. The SPS8 series can not only be programmed through the keyboard on the panel, but also be functioned as voltmeter and milliohm meter, which will bring great convenience to the users. As a regeneration product of ordinary programmable power supply, SPS8 series power supply is more cost-effective.

Product

1U Programmable DC Power Supply

Chroma 62000E

-

Chroma Systems Solutions, Inc.

Chroma 62000E - Chroma Systems Solutions, Inc.

Provides a single channel of 1.7kW, 3.4kW, 5kW and three channels of 1.7kW output configured in 1U chassis

Product

DC Power Supplies

DLM 3-4 kW

-

AMETEK Programmable Power, Inc.

DLM 3-4 kW - AMETEK Programmable Power, Inc.

The Sorensen DLM 3kW and 4kW Series programmable DC power supplies are designed to provide highly stable, continuously variable output voltage and current for a broad range of applications in a compact 2U ( 3½” high) chassis.

Product

DC Power Supplies

SGX Series

-

AMETEK Programmable Power, Inc.

SGX Series - AMETEK Programmable Power, Inc.

The Sorensen SGX Series represents the next generation of high power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20 V output in a 3U package the SGX leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

Product

Air Cooled Linear DC Electronic Load

ALx Series

-

Magna-Power Electronics, Inc.

ALx Series - Magna-Power Electronics, Inc.

The ALx Series utilizes conventional linear MOSFET-based dissipative elements, allowing the series to achieve a very wide voltage-current operating range within the model’s maximum power rating. Using the same heat management innovations developed for Magna-Power’s high density programmable DC power supplies, the ALx Series’ conservative cooling ensures long product life in environments up to 50 °C ambient operating temperature.

Product

Programmable High Power DC Power Supply

ADG series

-

Preen AC Power Corp.

ADG series - Preen AC Power Corp.

Preen’s ADG series is a programmable DC power supply with high power density and high output power, and offers many great advantages on response time, accuracy and output voltage range. ADG is an excellent source for testing or facility type applications, such as aerospace, renewable energy, automated test system, battery and server. With power level up to 80kW per unit, the ADG series provides output voltage up to 1000V and high output current of 2000A after custom modification.