-
Product
Engine Dynamometer
DE30
-
Power: 40 hp (30 kW)Torque: 70 lb-ft (95 Nm)Speed: 14,000 rpmWater Use*: 10 gpm (37.9 lpm)Inertia Value: 0.40 lb·ft2 (0.0168 kg·m2)Shipping Weight: 1,213 lb (550 kg)Rotation: bi-directional*No Cooling System
-
Product
Test Cell Measurement
-
Accurate Technologies’ long history in powertrain development provided insight into the day-to-day issues that were occurring during engine testing at a time when electronic devices were being introduced to monitor performance instead of traditional mechanical means. Outside of the harsh physical environments, devices used in these applications need to perform difficult high-voltage signal conditioning and high-speed synchronous pulse processing. ATI developed unique products that satisfy specific test cell or dynamometer challenges. These highly accurate products measure engine timing (IGTM) or speed (SmartTach) in convenient ways to provide information that otherwise may not be available.
-
Product
*Chassis Dynamometer
-
Loads the drive wheels to simulate real-world conditions for MOTOMEA asuring a vehicle's mechanical power at the drive wheels. Available for two-wheel, three-wheel, and four-wheel setups
-
Product
Towing Dynamometer
RSL-5.4K
-
RSL-5.4K Towing Dynamometer is designed for testing today’s compact cars. The RSL-5.4K is built with an all aluminum frame, sheet metal body and rides on an independent, coil spring suspension. The RSL 5.4K uses an eddy current absorber for power absorption. The power is provided by batteries and an alternator.
-
Product
Overhead Weighing
-
Rice Lake’s line of overhead weighing systems offers a comprehensive selection of quality weighing devices from tension dynamometers and crane scales, to suspended dial and electronic scales, to portable and permanent monorail scales. Rice Lake has a variety of reliable, accurate overhead weighing solutions no matter the industry or application need.
-
Product
Power Amplifier
5241
-
The Model 5241 is a voltage-controlled power amplifier designed exclusively for Magtrol's Model HD-825 Hysteresis Dynamometer. Because of its double braking system, the HD-825 requires more than 4 amps of power in order to reach full torque. The 5241 (which can provide up to 5 amps of output current) is necessary in order to amplify the power between a 6200 or DSP6001 Controller (which both have a maximum current output of 1 amp) and the HD-825 Dynamometer.
-
Product
Dynamometer
-
The PIAB Dynamometer is excellent for measurement and control of tension forces and weight, where accuracy, reliability and safety in all conditions is required. The PIAB Dynamometer conforms to the International Standards for Safety Inspectorates. The PIAB Dynamometer is an all-weather instrument, equally suitable for use in the laboratory as in the field for weighing and measuring mechanical tension forces.
-
Product
Towing Dynamometer
RS-110K
-
RS-110K towing dynamometer is designed for testing Class A trucks and is the most full-featured, reliable and accurate towing dynamometer in the industry. The RS-110K is built with a heavy-duty steel frame, heavy-duty industrial axles and rides on an air ride suspension. The RS-110K is designed to maintain 110,000 Newtons of constant drawbar pull and the ability to simulate an uphill slope of 25%. The towing dyno uses absorbers with special high temperature coils powered by an industrial generator so there are no lead-acid batteries to charge and testing is unlimited at low speeds.
-
Product
Engine Dynamometer
DS4010-HS
-
Power: 3,500 hp (2,611 kW)Torque: 11,875 lb-ft (16,100 Nm)Speed: 4,000 rpmWater Use*: 255 gpm (965.3 lpm)Inertia Value**: 290.8 lb·ft2 (12.3 kg·m2)Shipping Weight: 4,620 lb (2,097 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
Product
Powertrain
-
The MOTOMEA Electric Powertrain Dynamometer is part of a fully integrated modular system with hardware-in-the-loop testing. System capabilities include drive cycle and virtual test driving. Powertrain testing capabilities also include battery testing and simulation using bidirectional DC power supply.
-
Product
Dynamometers For EV & Traction Motors
-
MOTOMEA’s extensive catalog puts years of innovation at your fingertips. While we invite you to browse online today, we also encourage you to contact us directly to source the specific products you need.
-
Product
Engine Dynamometer
DE250
-
Power: 335 hp (250 kW)Torque: 886 lb-ft (1,200 Nm)Speed: 8,000 rpmWater Use*: 47 gpm (177.9 lpm)Inertia Value: 11 lb·ft2 (0.464 kg·m2)Shipping Weight: 3,086 lb (1,400 kg)Rotation: bi-directional*No Cooling System
-
Product
Multi-Purpose Brake Dynamometers
GIANT 6000 Series
-
The GIANT 6x00 product line is a multi-purpose, full-size inertia brake dynamometer for performance and NVH tests of brake systems from passenger vehicles to truck brakes, commercial vehicle assemblies and high-speed railway applications. The GIANT 6x00 product line offers a complete range of test functions for fully automated performance tests and basic NVH investigations and can be designed to fit the requirements of our customers.
-
Product
Full Chassis Dynamometer Laboratory
-
Trialon’s state-of the-art Chassis Dynomometer Laboratory demonstrates how your product favors in real world conditions. Trialon’s technical expertise combined with our customer-focused program management will provide you with the highest quality testing services. Our team is ready to provide your organization with reliable testing services backed by a strong commitment to quality.
-
Product
Froment Dynamometers
-
Froment Sigma Dynamometers test, prove and exercise agricultural tractors and self-propelled machinery with maximum efficiency and with the minimum waste of time and fuel. Testing is quick, accurate and simple to carry out, with a choice of automatic or manual test modes.
-
Product
Testing Electric Pump Motors
-
This Custom Motor Test System is designed for the testing of 5 different sized electric motors used in various sump, utility, sewage, well, pool and pond pumps. All of the components mentioned above are mounted on a versatile table that can be easily reconfigured and retrofitted to any Magtrol dynamometer.
-
Product
AWD Dynamometers
MD-AWD-1100
-
The AWD-1100 is the first of its kind – offering all of the large benefits of an AWD eddy current dynamometer in a large roll configuration. With a wheelbase maximum of 134”, you can test nearly any AWD vehicle on the road today.
-
Product
Towing Dynos for Compact to Mid-Sized Light-Duty Vehicles
-
Designed to maintain 1,214 to 1,798 lb (5,400 to 8,000 N) of constant drawbar pull, our towing dynamometers for compact to mid-sized light-duty vehicles feature aluminum frame, independent suspension, aerodynamic body and wireless touchscreen controller.
-
Product
Engine Dynamometers
-
Water brake, Eddy current and AC dynamometer systems for heavy-duty diesel, gaseous and gasoline testing applications from 20 through 10,000 HP.
-
Product
Mechanically linked AWD Performance Dyno
-
Mustang''s AWD-500 can be operated in AWD Mode while testing two-wheel drive vehicles. This process allows the non-driven axle to be spun by the dynamometer rollers at the same speed as the driven axle, eliminating the speed differential that occurs on two-wheel drive dynamometers problem solved.
-
Product
Water Brake Chassis Dynamometers
-
Chassis water brake dynos (also known as hydraulic dynamometers) can be operated continuously to resolve overheating, fuel mileage and drivetrain issues. Taylor’s eight models accommodating 50 to 1,100 hp at 40 mph enable testing of single-axle diesel pickup trucks, RVs and buses up through the largest tandem-axle on-highway trucks and buses. Tap into our deep product and applications knowledge to help you choose and make the most of the right water brake system for current and future needs.
-
Product
Water Brake Engine Dynamometers
DS Series
-
Similar in design to the DX Series, Taylor Dynamometer’s DS Series Water Brake Engine Dynos DS dynamometers bring you proven durability. In addition, this line provides increased power capacity – from 2,125 hp up to 4,250 hp (1,584 kW up to 3,169 kW) – thanks to larger diameter components.
-
Product
Portable Wattmeter (Unity Power Factor)
-
Supreme Instrument Laboratories
The Principle of working is Electo-dynamometer type for Wattmeters. Portable dynamometer type single phase Single element Wattmeter housed in laminated wooden cabinet size 235 mm length x 200 mm width x 180 mm height, with detachable lid, black bakelite panel fitted with anti-parallax mirror scale, knife edge pointer, rubber footings, carrying handles, locking arrangements.
-
Product
Double-Roller Dynanometer
R 200/2 DIVIDED | VP 430004
-
Maschinenbau Haldenwang GmbH & Co. KG.
The double roller dynamometer R 200/2 DIVIDED with an eddy current brake on each roller set and pneumatic lifting beam is designed to measure the performance of trucks and stands out due to its extremely robust, durable and low-maintenance construction. The R 200/2 ensures highest measuring accuracy due to the power measurement at a constant rpm, speed or tractive force, including the towing power measurement. For tuning and adjustment tasks the load simulation is evaluated graphically. An extension up to a wheel power of 660 kW is optionally possible.
-
Product
Engine Dynamometer
H3604
-
Power: 3,200 hp (2,386 kW)Torque: 18,674 lb-ft (25,329 Nm)Speed: 2,500 rpmInertia Value**: 799 lb-ft2 (33.67 kg-m2)Shipping Weight: 10,500 lb (4,763 kg)
-
Product
Emission Measurement Systems
-
HORIBA develops and manufactures products and systems for testing of all types of engines: heavy-duty to small utility, onroad systems to non-road, marine to locomotive, automotive to aeronautic. Our extensive product line includes analyzers, analytical systems, dilution/ sampling systems, dynamometers and automation systems to assist engineers to evaluate and advance: exhaust gas and particulate emissions, engine performance, fuel economy, fuelcell reformer efficiency, other parameters of engine and vehicle.
-
Product
Load Banks
-
Power Test Dynamometer offers a complete high capacity load testing solution with our load bank and gen set testing systems. Capable of testing generators and AC/DC power sources, our load bank systems safely apply electrical loads across the entire spectrum of operation. By offering a one-stop-shop for your Load Bank and it's accompanying data acquisition software, Power Test is committed to Making Your Testing Easy.
-
Product
Engine Dynamometer
TD-3102
-
Power: 1,250 hp (932 kW)Torque: 3,600 ft-lb (4,881 Nm)Speed: 6,000 rpmWater Use: 100 gpm @ 60 psi (6.3 lps @ 420 kpa) (No cooling system)Minimum Controllable Power: 11 hp (5 kW)Minimum Controllable Torque: 32 ft-lb (24 Nm)Inertia Value: 570 lb/in2Weight: 360 lb (163 kg)
-
Product
Chassis Dynamometers
-
Is a device used for vehicle testing and development. It uses a roller assembly to simulate a road in a controlled environment, usually inside a building.
-
Product
DynoLAB Test Cell Supervisory System
-
SAKOR Technologies’ DynoLAB™ data acquisition and control systems offer reliable, cost effective automation of all types of dynamometer test systems. As with all SAKOR products, the DynoLAB system undergoes a continuous program of upgrade and improvement, regularly expanding and enhancing DynoLAB’s capabilities.
