Development
See Also: Software Development, Developers, Development Boards, Test Development, Beta Testing, Bug
-
Product
Interface for the Multimode, multiprotocol Excalibur 8000 Family of Carrier Boards, Providing a Complete Solution for Developing & Testing MIL-STD-1760 Interfaces
M8K1760Px(S)
-
The M8K1760Px(S) interface module for the multimode, multiprotocol, Excalibur 8000 family of carrier boards provide a complete solution for developing and testing MIL-STD-1760 interfaces and performing system simulation of the MIL-STD-1760 bus. The module handles all standard variations of the MIL-STD-1760 protocol.Each M8K1553Px-1760 multi function module contains 64K bytes of dual-port RAM for Data blocks, Control registers, and Look-up Tables. All Data blocks and Control registers are memory mapped, and may be accessed in real time. Each of the independent dual redundant M8K1760Px modules may be programmed to operate in one of three modes of operation: Remote Terminal, Bus Controller/Concurrent-RT, and Bus Monitor. In addition, modules 1 and 3 can be programmed to operate as Concurrent monitors, to modules 0 and 2 respectively.In addition, Checksum, SRQ bit and Header Words are supported on each channel, as well as, error injection (BC and RT modes) and error detection (all modes).Each M8K1760PxS single function module operates either as a Bus Controller, Remote Terminal, or Bus Monitor.The M8K1760Px(S) comes complete with Windows software, a C-driver software library including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application
-
Product
Go No Go Testers
-
Go No Go Testers are developed in portable formats. Typically these are utilized at 'I' Level and 'O' Level test requirements and clear the aircraft LRU for flight.
-
Product
FBG Arrays & Cables
-
Technica Optical Components, LLC
Our Fiber Bragg Grating Arrays are available in a wide range of optical specifications. Our optical FBG cables consist of an array of Fiber Bragg Grating sensors. All our Fiber Bragg Grating Arrays and Cable models are designed to make handling and deployment fast, easy and intuitive. Technica undertakes a rigorous development process before products release. We are committed to continuous improvements after release to insure performance to the highest of standards.
-
Product
Xenon Arc Weathering Testing
-
Atlas Material Testing Solutions
Atlas has been designing and manufacturing material weathering test equipment for more than 100 years, initially starting with carbon–arc lighting technology inside. Since the introduction of the first xenon-arc based weathering instrument – the Xenotest 150 – xenon-arc instruments, also known as Weather-Ometers®, Xenotest® or SUNTEST®, have become indispensable tools for new product development and quality control.
-
Product
Digital Signal Processor Card for PCI bus
SI-C33DSP
-
The SI-C33DSP-PCI from Sheldon Instruments is a powerful Digital Signal Processor (DSP) card for your PC equipped with a PCI bus. It is based on Texas Instruments’ new 150Mhz TMS320VC33, 32 bit floating point DSP, and can transform your PC into an ultra high performance development system and DSP accelerator.
-
Product
GaN substrates
-
Sumitomo Electric Industries, Ltd.
Gallium Nitride (GaN) substrates are widely used for optical devices in the blue-violate to green ranges due to their excellent material characteristics. In recent years, GaN substrates have been drawing attention for power devices. Many development projects are underway.
-
Product
SONET/SDH/OTN and Multiservice Analyzers
-
In the lab and network equipment manufacturing (NEM) environment, research and development engineers require scalable testing solutions with port density, multi-user accessibility and automation capability. EXFO’s IQS testing solutions provide R&D and carrier lab engineers with the right offering of multiservice test modules covering a wide range of technologies, including SONET/SDH, Ethernet, OTN, Fibre Channel, etc.
-
Product
Sound Level Meter
SoundTrack LxT
-
The SoundTrack LxT® Sound Level Meter was developed to meet the unique needs of those involved in workplace noise exposure assessment and plant noise surveys.
-
Product
ATG Program
FS-ATG
-
FS-ATG is the world's easiest ATG program - pull-down menus, online help, and test generation wizard guide new users step-by-step through the process. It takes less than 2 minutes to 'point & click' a setup program for a board full of devices.Generates Vectors Faster Than EverFS-ATG is a 32-bit Windows 98/NT/2000 application that takes full advantage of today's powerful PC's. Small devices finish in seconds and most FPGAs / CPLDs, even the largest and most complex, can develop great tests after in just a few hours.
-
Product
Comprehensive Standard Software
Halicon
-
MVTec HALCON is the comprehensive standard software for machine vision with an integrated development environment (HDevelop) that is used worldwide. It enables cost savings and improved time to market. HALCON’s flexible architecture facilitates rapid development of any kind of machine vision application. HALCON provides you with continuous access to the latest technologies to solve machine vision applications. Find out more about the different editions and their release cycle.
-
Product
Debug Probe
-
High-performance Debug Probe for embedded development with support for multiple target architectures.
-
Product
20μm Transparent Quartz Interdigitated Electrode (IDE)
TIE1
-
20 μm transparent interdigitated electrode (IDE) fabricated on a high-quality quartz substrate for MEMS sensors, gas sensing, biosensing, optoelectronic detection, and electrochemical research. Manufactured using precision microfabrication with customizable electrode materials, dimensions, and layouts for laboratory, sensor development, and OEM applications.
-
Product
Density (Densitometer)
-
The oscillating U-tube densitometer method is a technique to determine the density of liquids and gases based on an electronic measurement of the frequency of oscillation, from which the density value is calculated.Density meters work by measuring the oscillation of a glass tube containing the sample.Specific gravity and refraction index can be measured. They are used in many industries such as: oil, chemical, food and beverage industries for quality control and research and development.
-
Product
Decade Box, Calibrated, Resistance, 7, 1ohm to 11.11111Mohm, 1 %
72-7270 CAL
-
The 72-7270 CAL from Tenma is a resistance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set resistance value from 1 to 11,111,110 ohm in one ohm increments. The decade accuracy is ±1% resistors used throughout. It has weight of 320g/0.70lb and dimension 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.
-
Product
Dielectric Cure Monitor
LT-451
-
The LT-451 Dielectric Cure Monitor is a versatile instrument designed for research and development, quality assurance/quality control, and manufacturing applications involving thermoset materials such as resins, composites, and paints and coatings.
-
Product
Non-destructive Eddy Current Testing of Long Products such as Tubes, Rods, Wire, and Profiles
DEFECTOMAT® Product Familiy
-
Foerster Instruments, Incorporated
The DEFECTOMAT systems by FOERSTER were specially developed for quality testing and process monitoring of long products. From hot testing to all bright steel processing steps, the surfaces of semi-finished products made from austenitic, (non) ferromagnetic metals can be tested for defects. The DEFECTOMAT systems operate in a contactless and non-destructive manner in accordance with the eddy current method and are used for detecting short defects, such as holes or localized defects and transverse defects. The systems detect defective materials fully automatically and reliably. Defects can be marked, classified, and automatically discarded. the test speed of up to 150 m/s facilitates 100% testing, even at high production speeds. The systems benefit from low operating costs and frugal energy consumption as well as low maintenance costs, few wear parts, and low use of materials.
-
Product
Mezzanine System
3560
System
ECM P/N 3560 provides four independent I2C channels. For ease of development a PCA9564 interface IC converts parallel data to I2C serial communication. Additionally an LTC1694 I2C accelerator IC decreases the rise time of the passively pulled up I2C bus allowing for greater capacitive loading or higher bus speeds. Each channel is comprised of SCL, SDA and two Grounds.
-
Product
Electrical Safety Tester
-
PSE AG has developed an electrical safety test that combines different tests for the testing of PV modules. With our four-in-one tester it is possible to test the following according to IEC 61215-2 and IEC 61730:
-
Product
Functional Testing
-
TestOrigen Software Testing Services Pvt Ltd.
Functional testing is a very important process for amplifying the quality of the software development life cycle. Functional testing mainly shows black box testing, which evaluates a particular IT product with the specific functionalities that indicate its specification. Therefore, to promote competencies and to convey a great product, it is necessary to perform a functional testing process.
-
Product
HiL Simulators
NovaCarts Battery
-
Exact cell simulation for validating battery management systems (BMS). "NovaCarts Battery" represents one of the most powerful and precise cell simulation systems on the market. This is leveraged by the modular and scalable HiL system to create optimum conditions for developing new battery management functions such as state-of-charge (SoC) and state-of-health (SoH) controls, active cell balancing and electrochemical impedance spectroscopy.
-
Product
PCI Strain Gauge Simulator Card, 4-Channel, 1k
50-265-204
Strain Gauge Simulator
These cards simulates the operation of a range of strain gauges making them ideal for testing strain gauge meters and a wide variety of industrial control systems. They provide a simple way of replacing in house developed sensors with a low cost simulator having excellent performance that is easy to calibrate and use.
-
Product
Services
-
Besides our product line of perceptual quality testing products, we offer extensive services in the field of QoS testing, where you can immediately benefit from the technology source - the expertise and experience of our developers. This is most often the case for field studies, or during the evaluation of network components, either if the customer's demand for QoS testing is a temporary one, or simly, if no engineering resources are available otherwise. For instance, OPTICOM could provide comprehensive QoS consulting, including not only objective but as well subjective evaluation, like we did during the introduction of a novel digital satellite broadcast service in the U.S. As a major contributor to the ITU standards, OPTICOM can also provide expertise in implemenation and conformance testing of independent implementations. Even if your PESQ implementation works according to specs, you should consider that an independent conformance test seal could be an asset that will leverage the value of your product from a marketing persepective.
-
Product
Multiple Gas Transformer DGA
MINITRANS
-
Based on the same core technology as the highly successful TRANSFIX the MINITRANS is a lower cost alternative, monitoring three key gases: Hydrogen, Acetylene and Carbon Monoxide (in ppm) plus moisture in oil (%RH & ppm). The measurement of these gases allows the user to detect a wide range of developing faults including arcing.
-
Product
OEM Energy Sensors
-
The OEM “standard” sensors are actually families of existing OEM sensors with typical specifications shown. They can be tailored as needed to fit your specific requirements. In addition to the products described, Ophir has developed hundreds of other OEM solutions. Simply fill out the Sensor Customization form so we can provide just the right solution for your needs.
-
Product
Global Hematology Solution
HELO Solution
-
An innovative design solution covering all the needs of a high throughput automated hematology platform.Flexible and efficient, HELO* is the optimum answer to the constant evolution of your laboratory.The HORIBA advanced technologies embedded in the Yumizen H2500/H1500 associated with over 30 years experience in Hematology diagnosis offer the highest analytical performances.Thanks to its data, tube managment, waste, blood film and digitalization management capability, HELO not only addresses your needs, but helps you to optimize your TAT, your floor space and your reagent storage.HELO comes along with our accreditation assistance program which has been developed in accordance with ISO-15189 certification.
-
Product
PCI Strain Gauge Simulator Card, 2-Channel, 350 Ohm
50-265-012
Strain Gauge Simulator
These cards simulates the operation of a range of strain gauges making them ideal for testing strain gauge meters and a wide variety of industrial control systems. They provide a simple way of replacing in house developed sensors with a low cost simulator having excellent performance that is easy to calibrate and use.
-
Product
Installation Testers
-
Offers two models that verify the safety of electrical installations in residential, commercial and industrial applications. Has been developed to carry out the following safety measurements of electrical installations in accordance with EN 61557 and DIN VDE 0100: Insulation resistance, RCD tests, Low Ohm resistance, Earth ground resistance, Loop impedance, Phase sequence.
-
Product
Pine Research Instrumentation
-
Known as a forefather in the development and production of electrochemical research equipment, Pine continues to support research and development activities worldwide through a family of vertically integrated resources represented by Pine Research Instrumentation. With a comprehensive team of engineering production, sales and support professionals Pine Research is well positioned to meet the industry's needs from its location in Durham, North Carolina.
-
Product
Classic AUTOSAR
-
Develop your electronic control unit (ECU) with our scalable basic software, operating systems, and tailor-made tool environment based on Classic AUTOSAR.
-
Product
Icarus Nodes
-
NITlab has developed powerful Wi-Fi nodes, called ICARUS, in order to support the increasing demand of state-of-the-art resources for experimentation in NITOS facility. Experimenters are able to run and evaluate demanding processing algorithms and protocols in a large scale testbed. Icarus nodes are equipped with 802.11a/b/g and 802.11a/b/g/n wireless interfaces and feature new generation intel 4-core cpu's and new generation solid state drives.
