Product

Standard Air Capacitor Set, 1pF To 1000pF

16380A

-

Keysight Technologies

16380A - Keysight Technologies

The 16380A is a standard capacitor set consisting of four precision capacitors - 1pF (16381A), 10pF (16382A) 100pF (16383A), 1000pF (16384A). These capacitors are primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using these standards.

Product

High Voltage Oil Test Set

-

Supreme Instrument Laboratories

Supreme Instrument Laboratories

Supreme High voltage Oil Testing Apparatus is designed for testing of dielectric strength of transformer Oil or any other insulating liquids. It constitutes a complete equipment and apart of an A.C. supply of 230 / 240 Volts, no other supplementary facilities are required for its operation.

Product

MP field sources calibration set

-

Langer EMV-Technik GmbH

Langer EMV-Technik GmbH

The MP field source calibration set is used to measure electric or magnetic fields in a frequency range up to 3 GHz. RF fields or transient fields can be measured. The MP field source calibration set is used to check fields of the Langer EMV-Technik GmbH field sources, fields of TEM cells and IC striplines.

Product

Optical Transimpedance Amplifiers

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices optical transimpedance amplifiers offer a complete, high performance, single chip solution for converting photodiode current into a differential voltage input. Supporting data rates from 155 Mbps to 11.1 Gbps, our transimpedance amplifiers are ideally suited for data communications and telecommunications applications supporting lay protocols including 1×, 2×, 4×, and 8× Fibre Channel, 10GBASE-LX4, SONET/SDH up to OC-192 with FEC, and 10 Gigabit Ethernet. Our transimpedance amplifiers feature low input referred noise current, high input current, and low power dissipation.

Product

Enclosed Optical Encoders

-

Renishaw Inc.

Renishaw Inc.

Featuring Renishaw's proven absolute encoder technology within an exceptionally robust enclosed design, FORTiS encoders deliver high performance measurement in the harshest of environments, offering significant benefits over conventional systems.

Product

Optical SpO2 Pulse Oximeter Simulator

OX-1 OxSim®

-

Pronk Technologies Inc.

OX-1 OxSim® - Pronk Technologies Inc.

Test the complete SpO2 system, including the sensor, extension cable with the OxSim® Optical SpO2 Pulse Oximeter Simulator. Slips into your shirt pocket and operates easily with just two buttons on a single AA battery. The auto-detection of the Sensor type eliminates the need to select the manufacturer oximeter under test. The optional serial communications port enables users to expand simulation settings for Saturation, Pulse Rate, and Perfusion Index, ideal for applications where a wide range of simulations is needed.

Product

Relay Buddy Adapter Set

190-4

-

Electronic Specialties Inc.

190-4 - Electronic Specialties Inc.

*Expands the testing capability of your Relay Buddy! *3 pack of adapters allows testing of shielded relays, same relays tested by #190 Relay Buddy *Relay adapter plugs into Relay Buddy first *Shielded relay then plugs into the top of the adapter

Product

Boundary Scan Test and JTAG Programming Tool Set

onTAP® Series 4000

-

Flynn Systems Corp.

onTAP® Series 4000 - Flynn Systems Corp.

onTAP is a comprehensive boundary scan testing and JTAG programming tool set that bolsters the most accurate possible fault coverage in an affordable and expedient manner, while providing support for the entire product life cycle.

Product

Test Leads Adapter Sets

-

Electronic Specialties Inc.

Electronic Specialties Inc.

A physical device used to connect electronic test equipment to a device under test.

Product

Multi-channel Optical Power Meter For Swept Test System

MPM-210HMPM-211, 212, 213, 215

-

Santec Corporation

MPM-210HMPM-211, 212, 213, 215 - Santec Corporation

Our MPM-210H is ideal for IL, WDL and PDL measurement of multi-port optical components including Dense Wavelength Division Multiplexing (DWDM), Arrayed Waveguide Gratings（AWG) , Wavelength Selective Switches (WSS) and more. When combined with our TSL-Series laser equipped with a power monitor output, the MPM-210H allows the user to complete real-time high precision IL measurements.

Product

Optical Spectrum Analyzers

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines.

Product

Fourier Transform Optical Spectrum Analyzer, 600 - 1700 nm

OSA202C

-

Thorlabs, Inc.

OSA202C - Thorlabs, Inc.

Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines. Many commonly available OSAs use grating-based monochromators, which have slow acquisition times due to the need to mechanically scan the grating and average out noise at each wavelength. Thorlabs' OSAs acquire the spectrum via a Fourier transform using a scanning Michelson interferometer in a push/pull configuration. This approach dramatically improves the acquisition time, enables a high-precision wavelength meter mode with 7 significant figures and ±1 part-per-million accuracy, and allows the included software to provide robust statistical analysis of the acquired spectra, as explained in the Design tab.

Product

- Optically Isolated Line Driver

Model 72A

-

Telebyte, Inc.

Model 72A - Telebyte, Inc.

FEATURES: DC TO 19.2 KBPS; Optically Isolated; TD & RD LED's; Loopback Switch; Built-In Surge Protection; Male or Female Connectors; Screw Terminals and RJ-11. The Model 72A Optically Isolated Line Driver links RS-232 based devices over extended distances. It provides optical isolation and has built-in verification of operation using a loopback switch.

Product

optical liquid leak detection system

LEAKLEARN®

-

Junkosha Inc.

LEAKLEARN® - Junkosha Inc.

The LEAKLEARN OPT liquid leak detection system incorporates fluoropolymer optical fiber sensors and detectors, emitting light when fluoropolymer optical fiber sensors contact liquid. T

Product

TWT Rack Mount Test Set

-

Polarity Inc.

Polarity Inc.

Polarity designs and manufactures the most reliable Microwave Tube Test Sets in the industry. Polarity understands the delicate structure of microwave tube devices and has built an extensive product line supporting the manufacturing process.

Product

CATV Fiber Optic Transmitter W/ Customer Specified ITU Wavelength

MX- T8500T-HP Series

-

Maxcom Inc.

MX- T8500T-HP Series - Maxcom Inc.

The MX-T8500T-HP series externally modulated transmitter with ITU specified wavelengths delivers high performance signal transmission of NTSC, PAL, digital or compressed digital signals from 50-862 MHz for CATV applications.

Product

Optical Fiber Type Hot Phosphoric Acid Concentration Monitor

CS-620F

-

HORIBA, Ltd.

CS-620F - HORIBA, Ltd.

In 3D NAND manufacturing process, dozens of layers of SiO2 and SiN are deposited, and the SiN layer is selectively removed using hot phos.In this process, the desired etching rate can be achieved by controlling the concentration and temperature of the chemical solution.Previous products have difficulty to measure high temperature chemicals, but the CS-620F is able to measure at high temperatures up to 170 C degrees.

Product

High Speed Optical Receiver Modules

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

Macom High Speed Optical Receiver Modules

Product

Precision Optics and Assemblies

-

Keysight Technologies

Keysight Technologies

For more than 35 years, Keysight has been designing and fabricating leading-edge optics for use in our laser interferometer systems. You can take advantage of this engineering, component fabrication, and assembly expertise and our state-of-the-art optics manufacturing facility in Santa Clara, California to deliver cutting-edge optical solutions to your customers:

Product

Optical Light Source

TM3111

-

T&M Tools Limited Co

TM3111 - T&M Tools Limited Co

TM3111 optical light source is a handheld optical light source, It can provide 1 to 6  wavelengths output to satisfy specific requirements including the 650nm visible light source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer’s needs.

Product

Optical Power Meters

-

Fiberstore

Fiberstore

Optical Power Meter.

Product

4-port Serial Interface, Modular, With/without Optical Isolation, 3.3V/5V, With 9-pin Connectors

APCI-7500-3/4C

-

TEAM SOLUTIONS, INC.

APCI-7500-3/4C - TEAM SOLUTIONS, INC.

*This model has 4x 9-pin D-Sub male connectors on 2 brackets*RS232, RS422, RS485, 20 mA Current Loop*Modular structure through SI modules*With or without optical isolation*Mode configuration free for each port*128-byte FIFO-buffer, common interrupt*Transfer rate programmable up to 115,200 Baud*Option: up to 1 MBaud for RS485 and RS422*Automatic direction recognition for RS48*Mode: configurable RS232, RS422, RS485, 20 mA Current Loop (active, passive) with or without isolation (SI modules)