Current Preamplifiers
-
Product
High Output Current Op Amplifiers ≥ 100mA
-
Analog Devices high speed , high output current (≥100 mA) op amps deliver high output current while driving low impedance loads with excellent linearity. Whether it's high output current, low input bias current, wide bandwidth, high slew rate, or low distortion, no one sets more performance standards for next-generation designs with the widest portfolio of leading edge products than Analog Devices.
-
Product
High Current Probe HC200D06G73TYPKCF
1125166
-
The HC200D06G73TYPKCF High Current Probe is specifically designed for high efficiency and precision in battery contacting applications. With its robust construction and advanced materials, this probe operates effectively within a temperature range of -45°C to +200°C. It facilitates continuous current of up to 300 A, making it an ideal choice for demanding electrical environments. The exceptional design includes a tip style made of beryllium copper with a gold plating that enhances conductivity and durability, while the uncoated barrel offers versatility in various applications.
-
Product
Split type AC Current Sensor
CTF-600A
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
* Suitable for current measurements of main cable. * Wire stopper is equipped for the slipping protection. * The special connector is not necessary as the output terminals are provided. * Open circuit protection and nonflammable plastic material.
-
Product
DC Voltage & Current Data Logger
-
The Track-It™ DC Voltage and Current Data Loggers are two channel battery powered stand alone compact data loggers that record up to 32,000 samples each of DC Voltage or Current data. Units are available in 4 DC voltage ranges or for DC current. Simply plug the data logger into an available USB port on your PC and customize the settings or transfer data with the included Track-It Software program.
-
Product
High Current Probe HCF73211B080G150A
1133501
-
The HCF73211B080G150A high current probe is specifically designed for power electronics applications, delivering exceptional performance and reliability. With a robust continuous current rating of up to 20 A and a wide temperature range from -45°C to +200°C, this probe is ideal for demanding environments. Its compact design, featuring a basic contact probe with a pitch of 2.54 mm, ensures compatibility with various electronic setups, providing precise measurements needed for effective power management.
-
Product
Digital Current Integrator
-
The ORTEC Model 439 Digital Current Integrator was designed to accurately measure DC currents or the average value of pulse currents such as produced by accelerator beams. It digitizes the input current by producing an output pulse for specific values of input charge. A front-panel switch permit the selection of three different amounts of charge (10–10, 10–8 or 10–6 coulomb) required to produce an output pulse. The instrument has a digitizing rate from 0 to 10 kHz to provide wide dynamic range on each setting and high-resolution readout without meter interpolation.
-
Product
Logger version 2-D electro-magnetic current meter
INFINITY-EM AEM-USB
-
Infinity EM is an autonomously deployable EM (electro-magnetic) current meter with a data logger. Due to the principle, the instrument provides high accurate 2-D current measurements in even low scatter fields, where ADVs (Acoustic Doppler Velocimeter) has difficulties. The measurement range is wide from 0 to ± 500 cm s-1. The instrument design is compact (1.0kg in air). Infinity EM allows for current velocity measurements virtually anywhere.
-
Product
High-Sensitivity Tri-Axial Accelerometer with Built-In Preamplifier
NP-7310
-
NP-7310 is the accelerometer with built-in preamplifier, and capable of tri–axial directions simultaneous measurement. It is suitable for the low frequency vibration measurement such as ground vibration or floor vibration while operating the machine. NP-7310 can be used with the sensor amplifier unit such as AU-2100, AU-2300 or PS-1300. Also, it is possible to input directly to the analyzer or recorder which the constant current amplifier is built-in such as the FFT Analyzer of DS-2000 series, DS-3000 series, CF-7200A, CF-9000 series or CF-3650/3850 series.
-
Product
High Current Probes (Inverter Testing) HCB155D12MS62TYPK
1136614
-
The High Current Probes (Inverter Testing) HCB155D12MS62TYPK, with order code 1136614, are designed for precision measurements in demanding electrical environments. Capable of withstanding a temperature range from -45°C to +200°C, they are ideal for a variety of testing applications. When used for inverter testing, these probes demonstrate exceptional reliability due to their low typical contact resistance of just 0.25 mOhm, ensuring accurate measurement of currents up to 400 A continuously.
-
Product
High Current Probes (Plug Connectors) HCF76289B310100750G300
1009831
-
The High Current Probes (Plug Connectors) HCF76289B310100750G300 is designed for high-performance applications, highlighting its robust build and reliability under varying environmental conditions. With an impressive operating temperature range of -45°C to +200°C, these probes are tailor-made for demanding tasks, ensuring consistent performance even in extreme situations. The probe features a pitch of 4.00 mm, making it suitable for meticulous applications requiring precision and stability in connectivity.
-
Product
Standard Round 2m Cables, Shielded, for Higher Current
ST010-S
-
Connection to digital boards, intended for higher currents. to be used with CPCI-1500, APCI-1500, APCI-1564, APCI-2032.
-
Product
Multifunction Voltage and Current Calibrator
MC140i
-
Multifunction calibrator MC140i is ideal for calibration of voltmeters, ammeters, DMMs and panel meters. AC/DC voltage 1uV to 1000V. Current 50uA? to 1000A using test coil. Deviation control along readout. 0.0035% basic dc accuracy. 0.03% basic ac accuracy. Supplied with RS232 interfaces. UKAS/NIST Traceable
-
Product
High Current Probes (Power Electronics) HCF77211B100G300
1006322
-
The High Current Probes (Power Electronics) HCF77211B100G300 are specialized tools engineered for high-performance applications within the power electronics sector. This probe model, designated by the order code 1006322, showcases a robust design suited for precise electrical measurements. With a continuous current rating of 20A and capable of operating in extreme temperature ranges from -45°C to +200°C, the HCF77211B100G300 is engineered for versatility and reliability in challenging environments. The probe's superior construction features a beryllium copper plunger with a gold plating, ensuring excellent conductivity while minimizing contact resistance to just 10 mOhm.
-
Product
Clamp Meters / Clamp Current Transformers
Clamp current meters
-
Professional-grade electrical testing tools used for safe, contact-free measurements of alternating current (AC) and direct current (DC).
-
Product
Low Input Bias Current Amplifiers (<100 pA)
-
Low input bias current op amps are required whenever the difference of currents or voltage is small and needs to be measured accurately. These op amps are used so that the signal is not loaded down by the input of the op amps. Low input bias current op amps are critical for interfacing sensors in applications from photodiodes, pH meters, or other electrometer related functions to downstream electronics. Analog Devices has many precision op amps that fit the definition and range of these applications.
-
Product
Flexible Rope-Type Current Probe
RCT1A and RCT5A
-
These probes have great bandwidth ensuring accurate measurement even with harmonically distorted wave shapes. For all RCT1A/RCT models, a NIST, NAVLAP, NPL (UKAS) factory traceable calibration certificate and certificate of conformance is supplied. UL/CSA approved materials are used throughout. Three phase and single phase flexible AC current sensors (rope sensors) are available for fast installation in confined spaces, eliminating the need for Electrical Supply Shutdown. Available outputs are 1A @ 2.5VA and 5A @ 0.5VA, this means long cable lengths from current sensor to signal conditioner allow these low VA ratings to be used, even when feeder cable to energy meter distances are large (up to 98 feet / 30 meters)
-
Product
Current Source-Sink D/A Converters
-
Analog Devices’ current source D/A converters (DACs) portfolio is ideal for photonics control applications where low current noise density, low dropout voltage, and high power efficiency, in addition to high channel density, is critical to system performance. The flexibility of the configurable current source D/A converter outputs, and 300 mA current delivery, make them suitable for resistive heaters and proportional solenoid drive.
-
Product
AC Current / Leakage Digital Clamp-on Tester
MCL-500DFN
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
MCL-500DFN AC Current / Leakage Digital Clamp-on Tester
-
Product
GAOTek Portable H/L Voltage Clamp Current Leaker
GT00YA00ZX
-
The GAOTek Portable H/L Voltage Clamp Current Leaker measures high voltage current with a 12.5 in (32 cm) insulating rod, adopting the latest CT technology and integrating mask digital technology. This instrument provides high precision, reliability, and stability with its integrated design between transducer clamp and domain. This leaker can be used to measure any wire with or without the insulation layer where the voltage is below 10 kV. The insulating rod is portable, moisture resistant, heat resistant, shock resistant, and insulating. It provides additional functionalities such as online current testing, peak and data holding, data storage, detection of high and low current in primary and secondary circuits separately, and provision of suitable calculations to conclude change in high and low pressure.
-
Product
AC/DC Current Clamp Meter
CM600
-
Clamp opens up to 1 inch (25.4 mm). One rotary switch operation. Large 4 digit LCD display. AC/DC Voltage measurement up to 600 Volt. AC/DC current measurement up to 600 A.Relative measurement. One touch auto zero.
-
Product
Single-point Current Meter
-
The SEAGUARD® is the core module used in small and medium sized underwater observatories. Whether used as a multipurpose instrument, or as a hub for strings in the water column, the SeaGuard manages connected sensors and the real-time communication of data and meta-data to shore. In autonomous configurations, long battery life is achieved with aggressive power routines keeping the full system at the lowest power levels possible.
-
Product
30A Auto Current & Voltage Tester
7610A
-
Peaceful Thriving Enterprise Co Ltd
*Fast, accurate and safety current measurement from the fuse box.*Feature with large LCD display and mini/ATO fuse probe.*Ideal for diagnostic of vehicle's electrical circuits.*With CE Approval.
-
Product
Current Interrupter
CI-50
-
MIL-SPEC locking Instrument EnclosureTan color reduces heat and blends with surroundings(4) AA's replaces 12v lantern type from previous modelLocking style port connectionHold setting in memory
-
Product
High Current Probes (Battery Contacting) HC200C06G72NTC
1034017
-
The High Current Probes (Battery Contacting) HC200C06G72NTC, order code 1034017, are engineered to deliver robust performance across various demanding applications. Designed with a coaxial probe configuration, these probes boast an impressive continuous current capacity of 300 A, making them ideal for high-load environments. With an operating temperature range of -45°C to +200°C, they maintain reliability under extreme conditions, ensuring that precision and performance are never compromised.
-
Product
Current Sensing Chip Resistors
CS
-
*3W rating in 1W size, 1225 package*High purity alumina substrate for high power dissipation*Long side terminations with higher power rating
-
Product
ECT / ECA Eddy Current Flaw Detector
EVi
-
United Western Technologies Corp
The EVi works directly with the EddyView Family of probes and accessories. UniWest’s unmatched selection of standard and advanced display features set a new standard for flexibility of applications, ease of use, interpretation of data and overall operator accuracy. The key to the EVi’s ground-breaking performance is the display of a visual image of the surface area under inspection alongside the customary and selectable eddy current signal displays (impedance plane, A-scan or strip charts). The EVi provides a high precision, easily readable display of surface conditions enabling improved interpretation of data while giving more accurate discernment of cracks, pits, gouges and fretting.
-
Product
High Current Probes (Power Electronics) HCF32009S135N130
1003498
-
The High Current Probes (Power electronics) HCF32009S135N130 is engineered for precision and durability in power electronics applications. With a pitch of 2.54 mm and capable of operating under extreme temperatures ranging from -45°C to +200°C, this basic contact probe offers reliable performance in diverse environments. Its innovative design allows for a continuous current rating of 12 A and a remarkably low contact resistance of 20 mOhm, making it ideal for high-efficiency systems where minimal resistance is crucial.
-
Product
Clamp type AC Current Sensor／for Power Monitor
CT-80PB
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*BIG CT WINDOW*AC 1A～500A*Current measurements of main cable
-
Product
High Current Probes (Battery Contacting) HCB095A11CUG19
1015191
-
The High Current Probes (Battery Contacting) model HCB095A11CUG19 is engineered for optimal performance in demanding electrical applications. With a pitch of 12.0 mm (472 mil), these probes are designed to operate under a broad temperature range of -45°C to +200°C, ensuring reliability even in extreme conditions. Their robust construction features a beryllium copper plunger with a gold plating, providing superior conductivity and long-lasting durability. This model boasts continuous current ratings of up to 100.00 A and maintains a typical contact resistance of only 2.00 mOhm, making it ideal for high power requirements.
-
Product
High Current Probes (Power Electronics) HCF73312B230G300
1005058
-
The High Current Probes, specifically the HCF73312B230G300 model (Order code: 1005058), are engineered to excel in demanding power electronics applications, providing reliable connectivity and precision where it matters most. With a robust design accommodating continuous currents of 30A, these probes function efficiently within a temperature range of -45°C to +200°C. Featuring a precision contact resistance of merely 8 mOhm, they ensure minimal energy loss during operation, making them ideal for critical high-current applications.
