-
Product
Push Back Probes (VF4) VF406B300G05
1004464
-
The Push Back Probes (VF4) VF406B300G05 is a critical component designed for high-precision applications, particularly where temperature and mechanical integrity are essential. These probes feature a basic contact design with a pitch of 4.00 mm (157 mil), making them versatile for various electrical connections. The operational temperature range spans from -45°C to +100°C, ensuring reliability in extreme conditions.
-
Product
Step Probes (F733SP) F73316B1036G300SP1
1009015
-
The F733 Probes, specifically the model F73316B1036G300SP1 with order code 1009015, represent a high-quality solution for precision probing applications. Designed with a pitch of 4.00 mm and capable of operating between -45°C and +100°C, these step probes are engineered to meet the demanding requirements of various testing environments while ensuring reliable performance. With critical specifications including a preload of 60 cN and a spring force of 300 cN, they guarantee optimal force application for accurate measurement results.
-
Product
Precision Modulators/Demodulators
-
Analog Devices precision modulators and demodulators support balanced modulation and demodulation, synchronous detection, signal recovery, and a range of other applications in industrial, medical, and communications markets. Our devices are specified over a temperature range of –40°C to +85°C and have the low power consumption that makes them ideal for battery-powered and low voltage systems.
-
Product
NI-9215, ±10 V, 100 kS/s/ch, 16-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module
779011-01
Voltage Input Module
±10 V, 100 kS/s/ch, 16-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module - The NI‑9215 performs differential analog input. The module contains NIST-traceable calibration, a channel‑to‑earth ground double isolation barrier for safety and noise immunity, and high common-mode voltage range. It is also offered in two connectivity variants: 10‑position screw terminal or BNC.
-
Product
Basic Contact Probes (100 Mil) F10007S150L300
1011984
-
The Basic Contact Probes (100 mil) F10007S150L300, identified by order code 1011984, are precision instruments designed for reliable electrical contact in various applications. Operating effectively within a temperature range of -45°C to +80°C, these probes are crafted with a focus on durability and performance, featuring a gold-plated steel plunger for minimal wear and excellent conductivity. Their design includes a spring force of 300 cN and a preload of 150 cN, ensuring that the probes maintain consistent contact pressure across different usages.
-
Product
8AI Robust Modbus RS-485 Remote I/O
ADAM-4117
-
8ch analog input(voltage or current)Operation temperature:-40~85°C,Power input:10VDC~48VDCNoise protection: 4kV surge(power),4kV EFT,8 kV ESD protectionInterface: RS-485/USB3000VDC isolation protectionLED indicator to monitor I/O status
-
Product
Infrared Thermometer
CENTER 350
-
Simple One-Handed Operation, Laser Targeting, LCD With Back Light, °C/°F Select Switch, Laser ON/OFF Switch, Automatic Power Off, Display Hold Function
-
Product
NI-9239 , ±10 V, 50 kS/s/ch, 24-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module
782402-01
Voltage Input Module
±10 V, 50 kS/s/ch, 24-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module - The NI‑9239 performs differential analog input. With channel‑to‑channel isolation, your entire system, including the device under test, is protected from harmful voltage spikes up to the isolation rating. In addition to safety, isolation eliminates measurement errors caused by ground loops because the front end of the module is floating. Designed for both speed and accuracy, the NI‑9239 is an effective general-purpose analog module because of its resolution, sample rate, and input range.
-
Product
Basic Contact Probes (75 Mil) F07538S064L150L
1005035
-
The Basic Contact Probes (75 mil) F07538S064L150L, identified by order code 1005035, are exceptionally designed for high-performance applications in precision environments. Engineered to endure temperatures ranging from -45°C to +80°C, these probes promise reliable performance across a versatile range of settings. With a robust continuous current rating of 4.00 A and a typical contact resistance of only 20.00 mOhm, they are ideal for applications requiring precision and efficiency in electrical connectivity.
-
Product
Step Probe F17516B0009G100SP
1139340
-
The F17516B0009G100SP Step Probe is engineered for precision and reliability in a diverse range of applications, crucial for electronics testing and assembly processes. Specifically designed under the F175SP and F176SP models, this probe incorporates cutting-edge technology to ensure optimal performance across various environments. It operates effectively within a temperature range of -45°C to +100°C, making it suitable for both extreme cold and high-heat conditions.
-
Product
Basic Contact Probes (118 Mil) F56318B130G180
1001333
-
The Basic Contact Probes (118 mil) F56318B130G180, identified by the SKU 1001333, are designed for precision and reliability in various applications. These probes operate effectively across a temperature range of -45°C to +80°C, making them suitable for diverse environments. With a continuous current capacity of 6.00 A and a typical contact resistance of just 100.00 mOhm, they deliver optimal electrical performance, ensuring minimal loss during operation. The redefined mechanical specifications highlight a preload of 90.00 cN and a spring force of 180.00 cN, allowing for accurate functionality under pressure. Additionally, the probes offer precise nominal and maximum travel distances of 4.30 mm and 6.40 mm, respectively, with a pointing accuracy of ±0.10 mm, ensuring exceptional reliability in critical applications.
-
Product
Walk-In Conditioning Test Chamber
-
Weiber Walk in Conditioning Test Chamber offers an ideal apparatus for conditioning materials at non-ambient temperatures. Now researchers, engineers, and technicians have a simple and cost effective method to condition samples prior to testing. Laboratory Conditioning Chamber is designed for the conditioning of samples prior to testing, provides conditions from 20% to 98% RH ± 2 and 0°C to 94°C ±0.5°C.Conditioning Test Chambers offers ideal humidity and temperature conditions required for testing the effect of environmental changes on the product. The chamber can be widely used to evaluate the durability of various products. Weiber delivers customized products at the most economical rate and within the limited delivery period.
-
Product
HC200B06G71C
1033975
-
The HC200B06G71C High Current Probe is engineered for exceptional performance in demanding environments. With a wide temperature operating range of -45°C to +200°C, this coaxial probe is designed for precise battery contacting applications. Its construction features high-grade materials like beryllium copper and brass, ensuring durability and reliable conductivity, which is essential in high current scenarios. The probe boasts a continuous current capacity of up to 300A, along with a typical contact resistance as low as 0.20 mOhm, making it an ideal choice for applications requiring efficient power delivery without excessive energy loss.
-
Product
Switch Probes (Normally Open (NO)) F86406B130G200
1017106
-
The Switch Probes (Normally open (NO)) F86406B130G200 is designed for precision applications, seamlessly integrating its technical capabilities with robust engineering. This model operates effectively across a temperature range from -45°C to +100°C, making it suitable for a variety of environments. With a continuous current rating of 1.00 A and a typical contact resistance of only 25.00 mOhm, this switch probe ensures reliable performance under load. Its precise switch travel of 4.00 mm allows for accurate operation, while the preload of 60 cN and spring force of 200 cN provide the necessary feedback for tactile response.
-
Product
F73216B1014G300SP
1012678
-
The F73216B1014G300SP Step Probes are designed for precision applications, offering exceptional reliability and performance across a wide temperature range of -45°C to +100°C. These probes, identified by their unique order code 1012678, feature a sophisticated design with a 2.54 mm pitch, making them perfect for various electronic testing scenarios. Built with high-quality materials, including a beryllium copper plunger plated in gold, the probes ensure minimal contact resistance of just 20 mOhm, significantly enhancing overall efficiency and effectiveness in seamless electronic measurements.
-
Product
Contact Probe TS300PT100200
1033230
-
The TS300PT100200 is a high-performance contact probe designed specifically for high current temperature measurements. With a temperature range of -45°C to +200°C, this probe is engineered to deliver reliable performance in various testing environments. The basic contact probe showcases a finely-tuned design, with a 5mm pitch, ensuring accurate readings in close-quarter applications.
-
Product
Pico-ITX SBC With 6th Gen Intel® Core™ I7/i5/i3 & Celeron® Processors, HDMI/LVDS, LAN And Audio
PICO500
-
The PICO500, an extreme compact pico-ITX embedded board, supports the latest 14nm 6th generation Intel® Core™ i7/i5/i3 processors (Codename: Skylake-U). The tiny PICO500 is equipped with one DDR4 SO-DIMM with up to 16 GB memory capacity. Integrated with Intel® HD graphic engine, the Pico-ITX motherboard supports HDMI and 18/24-bit dual channel LVDS that delivers a whole new level of Ultra HD 4K visual experiences. Its Pico-ITX form factor allows for an extremely compact performance system; meanwhile, the PICO500 is built to withstand wide temperature conditions, ranging from -20°C to +70°C (-4°F to +158°F) with active thermal solution.
-
Product
17" SXGA Industrial Panel Mount Monitor
IDS-3217
-
17" SXGA LCD panel with LED backlight for 20% power saving and environmental protection. -20 ~ +60° C wide range operating temperature, 5-wire resistive touchscreen solution or 3mm tempered smudge resistant protected glass.
-
Product
Fine Pitch Probes (300µm - 500µm) FP300D0301B015G030L057
1023125
-
The Fine Pitch Probes (300µm - 500µm) FP300D0301B015G030L057 is an advanced double plunger probe designed for precision applications that require high performance and reliability. Engineered within the FP-D family, these probes feature a pitch measurement of 0.40 mm (16 mil), ensuring compatibility with fine pitch circuits. With a robust operational temperature range from -45°C to +120°C, these probes are capable of withstanding extreme conditions, making them ideal for various environments in electronic testing and production.
-
Product
Cable Assembly, 50-Pin D-Type, Female to Female, 0.5m
A050DF5-050DF5-HA050
Cable Assembly
50-Pin D-Type HV Cable assemblies are constructed from 7/0.2 (24 AWG) Tinned Copper Wire with PTFE Type C insulation. The connector assemblies can be secured to the mating part by a screwlock. The 50-Pin Female connector options of this product can be directly mated to a corresponding Pickering Interfaces switching product.
-
Product
Pogo Connectors (≤ 2,54mm / 100mil) P14016B085G100TL053ST
1007798
-
Introducing the Pogo Connectors P14016B085G100TL053ST, a meticulously engineered contact probe designed to meet a range of critical application needs. With a pitch of just 2.20 mm, these connectors offer exceptional performance in tight spaces, making them ideal for a host of electronic devices. Their operational temperature range of -45°C to +200°C ensures reliability across varied environmental conditions, while the ability to conduct a continuous current of 8.00 A and maintain a low typical contact resistance of 100.00 mOhm guarantees efficiency and longevity in even the most demanding settings.
-
Product
16FE+2G Combo Unmanaged Ethernet Switch, ATEX/C1D2/IECEx, -40~75℃
EKI-5626CI
-
Communicates with SCADA software via Modbus/TCPCommunicates with NMS (Networking management system) via SNMPPort-based QoS for deterministic data transmission-40~75°C operating temperature range (EKI-5629CI/5626CI only)EMS level 3 protection for extreme outdoor environments12~48 V DC (8.4~52.8 V DC )wide-range power inputIEEE 802.3az Energy Efficient Ethernet (EEE)Supports redundant 12~48 V DC power input and P-Fail relayLoop detection
-
Product
Switch Probes (Normally Open (NO)) F87516B100G080
1008576
-
The F87516B100G080 Switch Probe, categorized under the F875-NO family, is designed for precision and reliability in industrial applications. This basic contact probe operates within a temperature range of -45°C to +100°C, making it suitable for use in diverse environmental conditions. With a pitch of 2.54 mm, it efficiently accommodates various setups while ensuring accurate measurements. The probe's robust construction and precise engineering allow it to endure demanding tasks, perfect for high-performance testing and measurement scenarios.
-
Product
Step Probe F73011B0014G110SP
1023866
-
The F73011B0014G110SP Step Probe, designed for use in the F720SP and F730SP models, represents a pinnacle in precision engineering. With a pitch of 1.27 mm and a temperature range of -45°C to +100°C, it is suitable for a broad array of applications requiring high reliability in extreme conditions. This step probe seamlessly integrates high electrical and mechanical specifications that further enhance its functionality and performance, making it an essential tool in sophisticated electronic environments.
-
Product
sbRIO-9219, Non-Enclosed, 100 S/s/channel, 4-Channel C Series Universal Analog Input Module
781027-01
Analog Input Module
Non-Enclosed, 100 S/s/channel, 4-Channel C Series Universal Analog Input Module - The sbRIO‑9219 is designed for multipurpose testing. With the sbRIO‑9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel. Non-enclosed modules are designed for OEM applications.
-
Product
Pyrometer With Integrated Controller
thermoMETER CS
-
The infrared thermoMETER CS temperature sensors are equipped with a miniature sensor that is particularly suitable for installation in confined spaces. The small size and temperature resistance up to 120°C open up a wide range of applications.
-
Product
Basic Contact Probes (100 Mil) F10006B150G060L
1086945
-
The Basic Contact Probes (100 mil) F10006B150G060L are engineered for precision and durability in electrical measurements. Designed with a basic contact probe configuration, these probes deliver reliable performance across a temperature range of -45°C to +80°C, making them suitable for a variety of environments. Their efficient design includes a pitch of 2.54 mm (or 100 mil), optimizing compatibility with standard connectors. Each probe offers a continuous current rating of 5.00 A and boasts a low typical contact resistance of just 20.00 mOhm, ensuring minimal power loss and high signal integrity during operation.
-
Product
Switch Probes (Normally Open (NO)) F88606B300G900SM
1004238
-
The Switch Probes (Normally open (NO)) F88606B300G900SM is engineered for precision and reliability, making it ideal for various applications requiring accurate contact measurement. With a family classification of F886-NO, this basic contact probe can operate seamlessly within a temperature range of -45°C to +100°C, ensuring consistent performance in varying environmental conditions. Its design features a compact pitch of 3.50 mm, allowing compatibility in tight assembly spaces, while the probe's body has been crafted from high-quality materials, enhancing durability and efficiency.
-
Product
Basic Contact Probes (100 Mil) F56205S190L200
1001347
-
The Basic Contact Probes (100 mil) F56205S190L200 is engineered to provide reliable and efficient connectivity for various applications. Designed with a meticulous focus on durability and performance, these probes feature a 2.54 mm pitch and operate within a temperature range of -45°C to +80°C. Their robust construction ensures they can handle continuous current of up to 5 A with a typical contact resistance of just 20 mOhm, making them suitable for high-performance electronic applications. With a preload of 60 cN and a spring force of 200 cN, these contact probes are optimized for precise engagement and disengagement, ensuring accurate operation over their nominal travel distance of 2.70 mm and maximum travel distance of 4.10 mm. Furthermore, with a pointing accuracy of +/- 0.05 mm, users can expect exceptional performance and dependability in their devices.
-
Product
High Current Probes (Plug Connectors) HCF76289B310100750G300
1009831
-
The High Current Probes (Plug Connectors) HCF76289B310100750G300 is designed for high-performance applications, highlighting its robust build and reliability under varying environmental conditions. With an impressive operating temperature range of -45°C to +200°C, these probes are tailor-made for demanding tasks, ensuring consistent performance even in extreme situations. The probe features a pitch of 4.00 mm, making it suitable for meticulous applications requiring precision and stability in connectivity.
