Product

Frame Grabbers

Picolo series

-

Euresys Inc.

Picolo series - Euresys Inc.

Video capture cards for standard PAL/NTSC cameras and high-definition 1080P cameras

Product

Phoenix Camera Link Frame Grabber (D48-PE1)

AS-PHX-D48CL-PE1

-

Active Silicon

AS-PHX-D48CL-PE1 - Active Silicon

Phoenix-D48CL x1 is a PCI Express board for the acquisition of digital data from a variety of Camera Link sources, including digital frame capture and line scan cameras. It supports all the formats of the Base and Medium configurations, i.e. single 8- to 16-bit data, through 12-bit RGB, to four tap 12-bit sources, as well as dual Base configuration, i.e. acquisition from two asynchronous Base cameras.

Product

Open Frame 3U 34HP Chassis

-

Kontron

Kontron

An open-frame solution for the open-minded engineer. With moveable rear profiles (up to 2.5mm,) 3U and 6U backplane compatibility options, air or conduction cooling options and the ease of fast and simple backplane interchangeability for fluid transition between VITA and PICMG bus architectures, the Hartmann Open Frame Chassis solution is the tool for customers who need versatility, accessibility and longevity.

Product

VPC Receiver Frame

ABex REC21-84TE-EXT

-

Konrad Technologies GmbH

ABex REC21-84TE-EXT - Konrad Technologies GmbH

Robust and flexible interconnect solution for test fixtures. Designed for the use with ABex PXIe Rack 18 it provides support to equip all 21 slots with VPC interconnect modules. In addition, it offers 6 more slots on the bottom, below the ABex rack to feed through signals from external measurement devices.The interface uses the well-known Virginia Panel connectors with more than 20.000 guaranteed mating cycles. To build DUT specific test fixture, we also provide the corresponding ITA mounting frame (ITA = Interchangable Test Adapter).

Product

Frame Grabber & Vision I/O Card

-

Axiomtek Co., Ltd.

Axiomtek Co., Ltd.

Axiomtek develops a full spectrum of machine vision cards to help customers accelerating their design and reducing development costs.

Product

Frame Grabber

R3-DIF

-

BitFlow, Inc.

R3-DIF - BitFlow, Inc.

The R3 frame grabber family has been designed to simplify the task of interfacing today's digital cameras to a wide array of imaging applications. The R3-DIF can interface to almost every LVDS camera manufactured (up to 32 bits).

Product

MPEG-2/1 Frame Grabber and Video Encoder / Decoder

516

-

Sensoray Co., Inc

516 - Sensoray Co., Inc

Real time MPEG-2 and MPEG-1 video encoder and decoder for NTSC, PALText caption buffer for Linux, Windows and QNXOnboard linear 16-bit audio frame grabberLinux, Windows, Windows CE and QNX drivers2 TTL level digital inputs and/or outputs

Product

MBoS Support Frame For 40-924-001 Or 60-102C-001 Chassis

95-901-005

-

Pickering Interfaces Inc.

95-901-005 - Pickering Interfaces Inc.

Frame assembly for mounting a Pickering 40-924-001 PXI or 60-102C-001 LXI chassis in the Modular Breakout System.

Product

Multi-Interface Frame Grabber

Xtium 2 CLHS PX8 LC

-

Teledyne DALSA

Xtium 2 CLHS PX8 LC - Teledyne DALSA

The Xtium™ 2 CLHS PX8 features CameraLink HS standard on the PCI Express™ Gen 3.0 platform. This single cable, single slot solution supports up to 4-CLHS lanes, each operating at 10.3 Gbits/s, to acquire images at up to 5.0 GBytes/s and transfer them using PCIe x8 slots to the host memory. The Xtium2-CLHS supports Active Optical Cable (AOC) to extend the cable length beyond 100 meters. Built-in data-forwarding and multi-board sync capabilities deliver a platform for distributed processing for high-speed, computational intensive machine vision applications.

Product

Frame Grabber

311

-

Sensoray Co., Inc

311 - Sensoray Co., Inc

High frame rate using the PC/104+ busColor or monochrome: PAL, SECAM, NTSC, RS-170 CCIR compatibleFour composite video inputs or three composite and one S-videoEight TTL I/O lines for camera controlProgrammable AGC, hue, contrast, saturationOptional enhanced SDK for Windows 98/2000/NT/XP/CEOptional Linux and QNX drivers

Product

USB MPEG Frame Grabber

2251

-

Sensoray Co., Inc

2251 - Sensoray Co., Inc

MPEG1/2/4 and JPEG capture to USB from an analog video source at D1 resolution Compact form factor for embedded designs 30 fps NTSC, 25 fps PAL Synchronous audio capture from a line level (stereo) input Multiple region motion detection Text overlay (OSD) SDK works with multiple units

Product

Cabinets, Frames And Wall Mounted Enclosures

-

AFL

AFL

A cabinet designed to attach to a wall. These smaller enclosures save floor space and often fit in areas where other racks and enclosures can't.

Product

MBoS Support Frame For 42-925-001 Or 42-926-001 Chassis

95-901-104

-

Pickering Interfaces Inc.

95-901-104 - Pickering Interfaces Inc.

Frame assembly for mounting a 42-925-001 or 42-926-001 PXIe chassis in the Modular Breakout System.

Product

FireBird CoaXPress Frame Grabber (4xCXP12-3PE4)

AS-FBD-4XCXP12-3PE4

-

Active Silicon

AS-FBD-4XCXP12-3PE4 - Active Silicon

FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees high speed and low latency image data transfers and zero CPU intervention.

Product

Film Frame Test Handler

4170-IH

-

TESEC, INC

4170-IH - TESEC, INC

High throughput ・High withstand load, and high thrust table ・Expansion of the strip attachment area　：260(L) X 300(W) [Withinφ300mm for WLCSP]・LOT control by barcode/2D code reader ・Easy device type exchange only test socket and　display screen setting・Auto-cleaning function unit is installed to　clean the socket at any desired timing.・8/12 inches ring conversion ・S2/S8 regulation compliance・SEMI G85 compliance・SECS/GEM compliance

Product

Linear Testfixture Testfixture for Mass Interconnect Cassette Interface Cassette and VPC ITA Frame Not Included, UUT 306 x 248 mm

MG-02-01 VPC G12

-

MG Products

MG-02-01 VPC G12 - MG Products

FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with detachable aluminium back and bottom panels• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (2000N) 1300 units• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 306 x 248 mm (wxd)• Outer dimensions: 470 x 490 x 100 x 170 mm (wxdxh1xh2)• Designed for Mass interconnect changeable cassette• Up to a maximum of 8 interface blocks of 160 or 170 signals• All interface blocks can be customized

Product

Open Frame Panel PC

PPC3-6.5-407

-

WinSystems, Inc.

PPC3-6.5-407 - WinSystems, Inc.

The PPC3-6.5-407 from WINSYSTEMS utilizes the E3800 family of Atom™ processors from Intel® to provide low power and high performance in a compact 6.5-inch Panel PC. Designed for harsh environments and reliability, the design includes a sunlight-readable display and soldered RAM for added shock and vibration resistance with operating temperature ranges available from -10°C to +70°C.

Product

FireBird CoaXPress Frame Grabber (Single CXP-6)

AS-FBD-1XCXP6-2PE8

-

Active Silicon

AS-FBD-1XCXP6-2PE8 - Active Silicon

FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.

Product

FireBird Camera Link 3U cPCI Serial Frame Grabber

AS-FBD-1XCLD-3CPCIS-2PE4

-

Active Silicon

AS-FBD-1XCLD-3CPCIS-2PE4 - Active Silicon

The FireBird Camera Link CompactPCI Serial card is a member of Active Silicon’s state-of-the-art FireBird frame grabber family. FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.

Product

Frame Grabbers

Domino Series

-

Euresys Inc.

Domino Series - Euresys Inc.

The Domino series is a range of high-end PCI and PCI Express frame grabbers for analog cameras. They support any system function associated to industrial acquisition, such as camera asynchronous reset, exposure and strobe control. The latest Domino boards - Melody, Harmony and Symphony PCIe - are based on an innovative proprietary technology called D Technology*. It provides a perfect digital image with the benefits of a proven analog environment: low-cost, reliable cabling and connections, smallest cameras, low power,

Product

PCI Express 4-Channel Frame Grabber with Audio Capture

811

-

Sensoray Co., Inc

811 - Sensoray Co., Inc

4 composite/S-Video + 4 stereo audio input channels Simultaneously captures on all channels Captures raw RGB or YUV video 4 general-purpose digital I/Os configurable as inputs or outputs