Particle Accelerator
See Also: Particle
-
product
Magnetic Particle Flaw Detector
MT-1A
MT-1A digital portable magnetic flaw detector, adopts large capacity lithium battery power supply. DC is exchanged into AC by the inverter and the phase shifted signal processor to provide power for the detector, it solves the shortcomings of traditional magnetic particle detector relying on the 220V power supply. It has low power consumption and can continuous work for more than 4 hours. The battery can be charged while working or off. It can real-time monitoring, process image, save data, print the test report, track inspection results, meet the requirements of standard operation and management. Especially suitable for the field without power supply field testing and high-altitude operations, it realizes the innovation of magnetic powder digital inspection.
-
product
Accelerated Life Test Systems
Test systems for accelerated life testing and product burn-in utilize Intepro’s electronic loads that are ideal where high power bulk loading is required. Characterization applications within Telecommunication and Aerospace sectors benefit from Intepro’s environmental stress screening (ESS)/Burn-in solutions
-
product
Magnetic Particle Flaw Detector
MT-1B
MT-1B magnetic particle flaw detector adapts high-capacity lithium battery pack, converse DC to AC through variable-frequency, providing magnetic powder flaw detector with magnetic power supply. With low power consumption, it can continuous work more than four hour after charging. It especially suits for working in the wild and aerial area.
-
product
NTA Particle Size Analyzers
NanoSight Range
The Malvern Panalytical NanoSight range of instruments utilizes Nanoparticle Tracking Analysis (NTA) to characterize nanoparticles from 10nm -2000nm* in solution. Each particle is individually but simultaneously analyzed by direct observation and measurement of diffusion events. This particle-by-particle methodology produces high resolution results for nanoparticle size distribution and concentration, while visual validation provides users with additional confidence in their data. Both particle size and concentration are measured, while a fluorescence mode provides differentiation of intrinsic or fluorescently labelled nanoparticles.
-
product
Accelerate the Process of Evaluating
Simulia
Powered by the Powered by the 3DEXPERIENCE® Platform, SIMULIA delivers realistic simulation applications that enable users to explore real-world behavior of product, nature and life.
-
-
product
Video Particle Counter with built-in Camera
VPC300
Particle Counter with unique built-in camera for capturing videos & photosthat are stored onto internal memory or a micro SD card. The VPC300 canmeasure up to 6 channels of particle sizes plus Air Temperature and RelativeHumidity. Use the included software to generate reports with videos, photos,and data points.
-
product
Constant Acceleration Tester-Arm Type
KRD31 series
KRD31 series constant acceleration tester are used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7. It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptability and reliability of wiring and the internal structures. It may expose mechanical and structural defects that are not found with vibration and shock tests.
-
product
HAST Accelerated Aging Test Chamber
Sanwood Environmental Chambers Co ., Ltd.
Sanwood is glad to be the ODM/OEM manufacturer of HAST chamber,HAST aging test chamber,HAST test chamber, HAST aging test chamber Accelerated Stress Test Chamber,High-pressure accelerated aging test sales enterprises all over the world!
-
product
PCIe Based FPGA Processing / Acceleration Card
iWave’s PCIe based FPGA Processing / Acceleration Card is a half-length PCIe x4 card featuring a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial interface. Front I/O adds dual SFP ports, 1x HDMI1.4a IN, 1x HDMI1.4a OUT. All of these features combine to make the card ideal for a wide range of applications such as Edge Computing, ARINC818 Avionics Video Bus, Acceleration.
-
product
Remote Particle Sensors
3718-A And 3719-A
Kanomax Remote Particle Sensors with analog output are designed to fit into your existing monitoring system, or they can be used as a stand-alone unit to monitor a critical area when connected to an alarm or controller. With two models available, these 2-channel remote particle sensors are capable of Modbus communication via RS485 interface. 0.1 cfm and 1.0 cfm flow rate models are available, along with flexible 4-20mA analog output with the 1.0 cfm unit (only).
-
product
Acceleration Simulation Mode (ASM) Roller Set
ASM-P-PLUS | VP 230047
Maschinenbau Haldenwang GmbH & Co. KG.
The ASM-P-PLUS roller set is used in test centres and is suitable for vehicles with a single driven axle. It was designed for the exact measurement of the exhaust gas behaviour of vehicles during their transient emission test and permits a driving resistance simulation for the exhaust gas tests ASM-5015 and ASM-2525 (Acceleration Simulation Mode) in accordance with the specifications BAR '97. The increased tractive force of its eddy current brake means that the ASM-P-PLUS is also suitable for power measurements at constant speed and constant tractive force.
-
product
Dynamic Particle Image Analysis System
iSpect DIA-10
Shimadzu's iSpect DIA-10 Dynamic Image Analyzer combines particle size and image analysis technology to offer complete particle characterization. It can perform particle imaging, size analysis, and foreign object detection, and obtain size distributions and number concentration, in as little as two minutes.
-
product
Solid Particle Counting System
MEXA-2000SPCS series
The HORIBA MEXA-2000SPCS series measures the number of solid particles from engine exhaust gas in real-time.The series can complete engine/vehicle certification testing in the latest regulations*1, such as Euro 6/VI and China 6/VI,along with R&D testing of engines and particulate filters by direct sampling without dilution.
-
product
Particle Size Analyzers
Particle systems can be complex, but measuring them doesn’t have to be! Anton Paar offers two different technologies to characterize particles from the nanometer to the millimeter range. The Litesizer series employs light-scattering technology to determine not only particle size, but also zeta potential, transmittance, molecular mass, and the refractive index of nano- and microparticles in liquid dispersions. The PSA series uses laser diffraction technology to measure the size of particles in both liquid dispersions and dry powders in the micro and millimeter range. Side by side they open up a wide range of possibilities for comprehensive particle characterization.
-
product
Non-standard Constant Acceleration Tester
KRD32 series
KRD32 series non-standard constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dual environmental force centrifugal motion and central high-speed rotating motion.
-
product
Acceleration Testing
The acceleration test is performed on a centrifuge to assure that material can structurally withstand the steady state inertia loads that are induced by platform acceleration, deceleration, and maneuver in the service environment, and can function without degradation during and following exposure to these forces. Acceleration tests are also used to assure that material does not become hazardous after exposure to crash loads. The acceleration test method is applicable to material that is installed in mobile platforms such as aircraft, helicopters, aerospace vehicles, air-carried stores, ground-launched missiles, trains, ships, automotive vehicles, etc.
-
product
Measurement of Volume and Particle Size Distribution of Material
Continuous non-contact measurement and registration of the volume and granulometric composition of bulk material (crushed stone, ore - a mixture of lumps of arbitrary shape) on a moving conveyor belt.
-
product
Accelerators
Our GPGPU embedded processing accelerators are powered by NVIDIA or AMD devices that are picked for their long service life support and suitability for embedded processing applications. Each GPU processor is mounted on a rugged mezzanine for upgradability.
-
product
Automated Screenshots of Webpages for Accelerated Layout Testing
Auto-generate full-paged screenshots of your webpages across multiple devices, operating systems, browsers, and resolutions - in a single go! LambdaTest Automated Browser Screenshot feature accelerates your UI and Layout testing helping you quickly identify layout issues across browser versions and screen sizes.
-
product
RF Automated Accelerated Reliability Test Station (AARTS)
RF-HTOL
The RF Automated Accelerated Reliability Test Station (AARTS) systems are designed to stress devices with RF, DC, and thermal stimulus. The systems were designed from their inception to include RF stimulus - it was not added as an after-thought. Hence, the software and hardware are fully integrated and provide full-featured support.
-
product
Accelerated Weathering Testing
Underwriters Laboratories Inc.
Accelerated weathering testing is designed to test the effects that sunlight and elevated moisture will have on outdoor furniture, construction materials and other outdoor use products over time.
-
product
Magnetic Particle Inspection
Is an inspection method used to identify defects on the surface of ferromagnetic materials by running a magnetic current through it.
-
product
Particle Impact Noise Detection (PIND) Test
This test detects the presence of free moving particulate contaminants within sealed cavity devices. This test is specifically directed toward relays and other devices where internal mechanism noise makes rejection exclusively by threshold level impractical. This test method also may be used prior to final sealing in the manufacturing sequence as a means of eliminating loose particles from the interior of the device.
-
product
Laser Particle Size Analyzer
Easysizer20
Zhengzhou Nanbei Instrument Equipment Co. Ltd
sysizer20 is the latest product of OMEC in Year 2006 and is highly automated, all the process can be done automatically after setting up initial parameters. Multiple sample feeding systems are available to meet your requirements. Applications：Measure the particle size distribution of powder or latex Principle：Use the principle of laser light scattering to determine particle size distribution.
-
product
Dynamic Imaging Particle Analysis Technology
FlowCam® Macro
Yokogawa Fluid Imaging Technologies, Inc.
Based on proven FlowCam dynamic imaging particle analysis technology, and optimized for larger particles (50μm to 5mm), FlowCam Macro provides rapid particle characterization that goes beyond just particle size. Direct, image-based measurements of particle size and shape enable differentiation of particle types in a heterogeneous mixture.
-
product
Highly Accelerated Life Testing (HALT)
Quickly validate reliability and identify manufacturing defects that could cause product failures in the field with MET’s Highly Accelerated Life Test (HALT)HALT technique uses a combination of accelerated stresses to expose product flaws early in the design and manufacturing stages, which improves product reliability and customer confidence inherent to the design and fabrication process of a new product as well as during the production phase to find manufacturing defects that could cause product failures in the field.
-
product
Handheld Ultrafine Particle Size Distribution Measurement.
partector 2 Pro
Naneos Particle Solutions gmbh
The naneos partector 2 Pro version is a further development of the well-established Partector 2. The Pro version of the partector 2 can additionally switch through different deposition voltage levels and therefore scan an 8-channel size distribution of an aerosol of interest.
-
product
Software For SALD-2300 Laser Diffraction Particle Size Analyzer
LabSolutions SALD
Providing Secure, Confident Data Management on a Network System! The SALD-2300 laser diffraction particle size analyzer is now compatible with data integrity requirements. Connecting LabSolutions SALD to the LabSolutions system, with its proven compatibility with ER/ES regulations, enables confident, reliable data management. In addition to SALD data, consolidated management is available for LC, GC, and UV data.
-
product
Particle Impact Noise Detector
BW-LPD-D4000
FREQUENCY: SINE WAVE 27Hz TO 265HzACCELERATION: 0 TO 20G PEAKSHAKER: 100 FORCE LBS 3/4" IN STROKE 75 IN PER/SEC VELOCITYAMPLIFIER: 250 WATTS MINIMUMD.U.T. WEIGHT: 300 GRAMS PRACTICAL LIMIT @ 20G
