Frequency Doublers
-
Product
Personal RF Detection Meters, High Frequency
-
Personal RF Detection Meters from Sensory Perspective Ltd
-
Product
Frequency Counter (225MHz - 18GHz)
S43180
-
S43180 series high-precision frequency counter is a high-precision frequency measurement instrument. It has a frequency measurement resolution of 10 bits per second. The whole machine scheme adopts countdown technology and digital interpolation technology to realize the high-precision measurement of the instrument. It has measurement functions such as frequency, period, frequency ratio and powerful mathematical statistics operations (maximum value, minimum value, average value, PPM, standard deviation, Allan variance).S43180 series has reliable performance, complete functions, high measurement accuracy, wide frequency measurement range, high sensitivity, large dynamic range, high cost performance and easy to use. It is especially suitable for frequency measurement in scientific research and measurement fields such as aerospace, crystal oscillators, and components.
-
Product
High Frequency Spark Tester
HF-15B
-
The HF-15B is a compact, digital 3kHz spark tester with a test voltage range of 500v to 15KV rms.
-
Product
C Series Frequency Input Module
Input/Output Module
The C Series Frequency Input Module is designed to acquire isolated frequency inputs from magnetic pickup sensors, variable reluctance sensors, Hall effect sensors, and other transducers with a frequency output. Additionally, the C Series Frequency Input Module provides isolation, configurable thresholds, selectable filtering, and embedded counter measurement logic. These measurements can be synchronized with other frequency, analog, digital, and counter measurements in a single acquisition.
-
Product
Low Frequency Test Systems
-
Ingenieurbüro Dr. Hillger Ultrasonic-Techniques
Our imaging low-frequency inspection systems are excellently suited to displaying internal defects with high resolution and high dynamics.
-
Product
Radio Frequency Probe Receptacle H860
1012573
-
As a receptacle, H860 (item number 1012573) supports precise positioning of the compatible High Frequency Probe within the contacting system. As a Receptacle, H860 guides and positions the matching Contact Probe; depending on the design, the Receptacle can also provide electrical connection or insulation and supports controlled probe replacement during maintenance. For H860, installation dimensions and contact geometry must be matched carefully to the corresponding RF probe family. When selecting H860, the matching probe family, installation dimensions and any required connection or insulation design should be considered together.
-
Product
Custom Radio Frequency (RF) Receivers & Sources
-
FLO – Frequency Locked Oscillators, IFM – Instantaneous Frequency Measurement, DCU – Digital Control Units, ACU – Antenna Control Units, IDCU – Integrated DCUs, and Other Custom Products
-
Product
3207a GPS/GNS Frequency and Time Reference
-
Precise Time and Frequency, Inc.
The ptf 3207A GlobalTyme2 GNS Receiver introduces a new level of advanced capability from a second generation, based on the highly successful ptf 3203A and ptf 3204A GlobalTyme receivers.The unit is both a frequency standard and a time standard and has been used as a precision frequency reference with low phase noise, in satellite communications applications around the world.
-
Product
125 Mbps Low Frequency Bit-Error-Ratio Test System
OPBK125
-
The OPTELLENT OptoBERT™ OPBK125 is a costeffective easy-to-use bit-error-ratio (BER) measurement system for testing components and systems in R&D and manufacturing environments as well as field installations. It incorporates a pattern generator, clock recovery circuits, and a bit-error-ratio analyzer in one compact module that provides electrical interfaces at data rates up to 125 Mb/s.
-
Product
Servo Analyzer (Frequency Characteristics Analyzer)
DS-0342
-
The DS-0342 Servo Analyzer (Frequency Characteristics Analyzer) is a device that measures the transfer function (frequency response function) of control circuits and mechanical structures with high accuracy.It can measure characteristics (phase margin, gain margin) of the control circuit, resonance frequency of the structure, and impedance, etc.This is a PC based servo analyzer that pursues usability with the following functions in addition to "easy-to-use operability" and "diversity of graph display".
-
Product
2210A & 2211A Quartz Frequency Standards
-
Precise Time and Frequency, Inc.
The ptf 2210A Quartz Frequency Standard has been designed to provide a highly stable and spectrally pure frequency reference for applications requiring the ultimate in short term frequency performance.The instrument contains a double oven controlled stress compensated (SC cut) quartz crystal oscillator (OCXO) to give the ultimate in performance.Ideal for laboratory or system use, the unit provides good stability performance at lower cost and with improved phase noise.
-
Product
Radio Frequency Probe HF77HFMm0112G540MSMPmPH
1114508
-
The Radio Frequency Probes HF77HFMm0112G540MSMPmPH is a high-performance coaxial probe designed for precise electrical measurements. With a pitch of 4.00 mm, it can operate effectively within a temperature range of -45°C to +100°C, making it suitable for various environmental conditions. Its robust design includes features such as a 50 ohm impedance and a maximum frequency of 12 GHz, enabling accurate signal transmission and reception for demanding applications in RF testing and development.
-
Product
Frequency Dividers
-
Precision Test Systems manufacturers' various divider boards as options to its range and frequency standards and distribution amplifiers.
-
Product
Ultra-Low Frequency Spring Activated Vibration Isolation Workstation
MK26 Series
-
The New MK26 Series Vibration Control Workstation with more ergonomic comfort is designed specifically for ultra-low natural frequency applications. Kinetic Systems manufactures the system utilizing the Minus K patented negative stiffness vibration isolators in order to provide a compact, passive Vibration Isolation Workstation with ultra-low natural frequencies, higher internal structural frequencies, and excellent vertical and horizontal isolation efficiencies. The MK26 has also been upgraded to provide much better user comfort and additional leg space.
-
Product
Radio Frequency Probes HF77MATEAXm0112G540MSMPmPH
1040393
-
The Radio Frequency Probes HF77MATEAXm0112G540MSMPmPH, with order code 1040393, is an advanced coaxial probe designed for precision applications requiring meticulous electrical performance. This model operates over a wide frequency range up to 12 GHz and is built to withstand extreme temperatures from -45°C to +200°C, ensuring reliability in various environmental conditions. The robust design, featuring a brass barrel plated with gold and a plunger made from beryllium copper, enhances durability and signal integrity during operation.
-
Product
Radio Frequency Probes (Automotive) HF77HFMf0412G2160MSMPmF
1050858
-
The Radio Frequency Probes (Automotive) HF77HFMf0412G2160MSMPmF is designed specifically for demanding automotive applications. With a robust coaxial probe design, it ensures reliable performance in various environments, operating effectively within a temperature range of -45°C to +100°C. This makes it suitable for both high and low-temperature applications, providing versatility for automotive engineers and technicians. With a pitch of 12mm and impedance of 50 ohms, the HF77 probe is engineered to deliver precise measurements and high-frequency response up to 12 GHz, ensuring it meets the rigorous standards of modern automotive diagnostics.
-
Product
Impedance Analyser Frequency Response Analyser
C60
-
The C60 investigates the opaque world of analog networks. The unit operates in two test modes. It can measure the frequency response of a two port system producing a gain/loss and phase graph. It can also measure the reactive response of a two terminal network producing an impedance/admittance and phase graph. Electronic, electrical, electro-acoustic and other networks can be tested with sine wave excitation and the results displayed on a PC.
-
Product
UV & Visible Frequency Mixing Module
SolsTiS EMM
-
The SolsTiS External Mixing Module (SolsTiS EMM) provides fully automated tuning in the visible (480-670 nm) and IR (1.1-4.5 µm) with further extensions options into the UV (300-350 nm). It delivers high stability sum and difference frequency mixing of SolsTiS wavelengths with other single frequency sources, primarily via high efficiency single pass mixing in PPLN. This all-solid state solution for wavelength coverage supersedes dye lasers, removing the hazards and instabilities associated with this toxic gain material. SolsTiS EMM delivers unparalleled performance and reliability, enabling you to automatically tune and scan over a broad wavelength range.
-
Product
Power Frequency Transducer
PP1S
-
1. Measuring and conversion IEC 6882. Dielectrical strength IEC 688 4 KVac / 1 min.3. Impulse test ANSI C37.90 / 1989 IEC 255-3 5KV ( 1.2 x 50 us ) 3KA ( 8 x 20 us ) - current coil4. Surge test (ring wave) ANSI C37.90 / 1989 ( 3KV - 0.5us / 100KHz ) IEC 255-3 ( 2.5KV - 0.25ms / 1MHz )5. Adaptability for power system VDE 0110 6. Measuring reliability VDE 3540
-
Product
Radio Frequency Probes (Automotive) HF77MATENETm011G1020HMTDmFV1
1097821
-
The Radio Frequency Probes (Automotive) HF77MATENETm011G1020HMTDmFV1 is designed for precision applications in automotive settings, offering superior performance under various conditions. With a temperature range of -45°C to +100°C, this probe is ideal for testing across a wide spectrum of environments. It features a reliable coaxial design that ensures consistent signal integrity while maintaining high durability. Equipped with a plug connection type (flux-proof), it supports ease of integration with various testing setups, making it a versatile tool for both professionals and aftermarket applications.
-
Product
GPS Frequency Standards
-
Precision Test Systems manufacturers' a full range of GPS and GNSS frequency standards that are disciplined to most of the worlds satellite systems.
-
Product
Electronic Ballast High Frequency Parameters Tester
UI2002A
-
• Measure Vrms, Irms, W, PF/Hz • Voltage range: 10~600V, Current range: 10~2000mA, Frequency range: 20~70kHz • Accuracy: Class 2
-
Product
Radio Frequency Probes (Industrial) HF860BNCf014G550MCXfP
1032634
-
The HF860BNCf014G550MCXfP Radio Frequency Probe is engineered for precision and reliability in industrial applications, featuring a coaxial design that ensures minimal signal loss. With a robust operating temperature range from -45°C to +100°C, this probe is well-suited for environments that demand resilience against extreme conditions. It supports a continuous current of 10A and can operate effectively at frequencies up to 4GHz, making it a highly adaptable tool in high-frequency testing scenarios. The mechanical attributes of the HF860 probe include a total length of 44.9mm and a maximum travel of 5mm, allowing for versatile usage across various devices. The meticulously crafted construction from high-grade materials such as beryllium copper and brass, plated with gold, enhances durability and conductivity. Additionally, the inclusion of a plug connection type ensures a secure and efficient attachment. This probe stands out in the market for its combination of technical performance and quality craftsmanship, making it the go-to choice for professionals in the field.
-
Product
Rubidium Frequency Standard
RFS VXI
-
*RFS VXI is designed to work as part of information measuring systems based on the VXI bus as a rubidium frequency standard.*RFS VXI is intended for use as a highly stable laboratory signal source for checking generator devices, time-frequency measuring equipment and other equipment, synchronizing navigation systems.*The RFS VXI contains two independent rubidium reference oscillators: main and standby.*RFS VXI is a VXI standard, register based device and measures C-1.*RFS VXI implements the "Self-control" mode, which checks the output frequencies of the rubidium standard.
-
Product
Low Frequency 3-Way Power Dividers To 1500 MHz
-
Pulsar Microwave manufactures 3-way power dividers from 1 MHz to 1.5 GHz in both surface mount and connectorized packages. They are rated for an input power of 1 watt maximum for a load VSWR of 1.20:1 or better. This series of 3-way power dividers are currently offered in four outline packages. The hermetically sealed outline 301 and surface mount outline B are useful in portable applications where space is premium. Outlines 412 and 433 are connectorized versions in cross or in-line format, respectively.
-
Product
Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfS
1035672
-
The Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfS are meticulously designed to meet the specific needs of automotive applications, making them a crucial tool for any professional in the field. Designed with a robust coaxial probe structure, these RF probes incorporate advanced materials such as beryllium copper and brass, ensuring exceptional durability and performance in various environmental conditions. They can operate effectively within a temperature range of -45°C to +100°C, making them suitable for both extreme temperatures and demanding applications.
-
Product
Radio Frequency Probe HF860PCBCO016G530MCXfSV2
1038941
-
The HF860PCBCO016G530MCXfSV2 Radio Frequency Probe represents an optimal choice for precision measurements in various applications, particularly in consumer electronics. With a robust design characterized by a coaxial probe configuration, it offers enhanced performance across multiple frequencies, specifically designed to meet the demands of high-frequency applications up to 6 GHz. This probe provides excellent connectivity thanks to its MCX female connection type, ensuring reliable interfacing with various RF components.
-
Product
Radio Frequency Probes (Industrial) HF860SMAf018G990MCXfS
1038922
-
The Radio Frequency Probes (Industrial) HF860SMAf018G990MCXfS is designed for high-performance applications requiring precise measurement capabilities. With a pitch of 6.50 mm, this probe efficiently operates within a temperature range of -45°C to +100°C, ensuring reliability even in extreme conditions. Its superior electrical specifications, including a continuous current rating of 10 A and an impedance of 50 ohms at frequencies up to 8 GHz, makes it a vital tool for various industrial applications. The probe's construction utilizes premium materials such as gold-plated brass and beryllium copper for enhanced durability and conductivity, ensuring minimal signal loss and high accuracy during measurements.
-
Product
Radio Frequency Probes (Automotive) H860FL
1020933
-
The Radio Frequency Probes (Automotive) H860FL is designed with precision in mind, offering a pitch of 9.00 mm (354 mil) which optimizes its performance in automotive applications. This model is equipped to handle a continuous current of 10.00 A, making it a robust choice for demanding environments. The total length of the probe measures 22.00 mm, with a press ring diameter of 8.50 mm and an outer diameter of 8.00 mm, ensuring compatibility and ease of integration into various automotive systems.
-
Product
Radio Frequency Probe TC-P 201 008 RJ 45
1021620
-
The TC-P 201 008 RJ 45 Radio Frequency Probes are designed for high-performance applications, providing reliable connectivity and precision in data transmission. With an optimal continuous current rating of 1.50 A, these probes ensure that electrical signals are transmitted efficiently while maintaining low contact resistance, measured at only 20 mOhm. This combination makes the TC-P 201 008 ideal for various consumer electronics applications, where both performance and reliability are paramount.
