Product

High Voltage Breakdown Tester

Model HV-55

-

Laxtronics Instruments & Controls Pvt. Ltd

Model HV-55 - Laxtronics Instruments & Controls Pvt. Ltd

5 Kilo Volt AC, 5 Kilo Volt DC, 30 Milli Ampere, Timer 0 To 100 Seconds, HV Prods, Start-Stop-Trip-Reset Using Single Switch On The Test Prods. Start Function Apply Test Voltage From 0 To Set Voltage Gradually.

Product

Double Voltage Double Frequency Generator Setup

DVDF

-

AJIT Electronics Co.

DVDF - AJIT Electronics Co.

This test setup is generally used to perform induced voltage test on the transformers. This set up consists of the USED motor and generator combination to develop the required voltage and frequency. Both generating unit and the drive motor are mounted on a common metallic frame.

Product

Connect PT100/PT1000 Sensors To Output A Voltage Signal

K- PT100/1000

-

Influx Technology LTD

K- PT100/1000 - Influx Technology LTD

Our K-PT module is designed to connect up to PT100/PT1000 sensors and simply provides an output voltage signal. Thus enabling the most standard voltage measurement devices to work with PT100/PT1000 sensors. The PT100 sensors offer excellent accuracy and repeatability.

Product

Standard Voltage 37 Pin D-Type Connectors

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connectors below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

16-Ch Relay And 16-Ch Isolated Digital Input W/ Digital Filter & Interrupt PCIe Card

PCIE-1762H

-

Advantech Co. Ltd.

PCIE-1762H - Advantech Co. Ltd.

16-ch digital input and 16-ch relayInterrupt handling capability for all DI channelsSelectable Digital filter time for all DI channelsOutput status readableLED indicator to show activated relaysSelectable Form A or Form B

Product

High Voltage Dry Reed Relays For up to 15 kV

SERIES 62 & 63

-

Pickering Electronics

SERIES 62 & 63 - Pickering Electronics

ungsten switches with power rating of 50 Watts maximum? Three switch types:5kV stand-off, 3.5kV switching10kV stand-off, 7.5kV switching15kV stand-off, 12.5kV switching? Series 62 has push-on connectors on top face for EHT and solder pins and nylon studs on the underside for PCB mounting

Product

Voltage Controlled Oscillator Assembly With Heater

-

Teledyne RF & Microwave

Teledyne RF & Microwave

Teledyne RF & Microwave has designed a Voltage Controlled Oscillator to replace an existing application. The oscillator covers the 520 to 560 MHz frequency range. The oscillator provides +10 to +13 dBm output power. The oscillator has internal heaters designed to maintain the oscillator assembly at constant temperature. The unit operates over the 0° to 60° C temperature range with ~200 KHz frequency variation due to temperature variation.

Product

Single-Channel Voltage Output D/A Converters

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices offers a broad portfolio of single-channel voltage D/A converters, which includes many leading products in performance and package size, with resolutions from 8-bit to 20-bit, low power, and a serial SPI, parallel, or I2C interface. Within the industry’s smallest packages, we offer more functionality within smaller board and module sizes. The integration of a precision reference minimizes board area and costs, eliminates the need of calibration, and reduces the number of external components to simplify the design stage.

Product

SolarIV Series Solar Cell Current Voltage Measurement System

SlarIV

-

ZOLIX

SlarIV - ZOLIX

SolarIV IntroductionOne of the key measurements needed for photovoltaic devices in the measurement of their I-V characteristics. Through measuring the I-V curves the user can determine physical performances of devices such as photo-electric conversion efficiency, fill factors and so on. Such data is important for reliable work in research and quality inspection. ZOLIX supply the SolarIV system and the most perfect, professional technical support.

Product

High Voltage 50 Ω Pulse Generator

TLP-4010C

-

High Power Pulse Instruments GmbH

TLP-4010C - High Power Pulse Instruments GmbH

*Wafer and package level TLP/VF-TLP/HMM testing*Ultra fast 50 Ω high voltage pulse output with typical 100 ps rise time*Built-in HMM (IEC 61000-4-2) pulse up to ±10 kV*High pulse output current up to ±40 A*High speed 50 Ω trigger output for oscilloscopes (synchronous to high voltage pulse output)*6 programmable pulse rise times: 100 ps to 50 ns*8 programmable pulse widths: 1 ns to 100 ns*Optional pulse width extender increases pulse width up to 1.6 µs in 68 programmable steps*Fast measurement time, typically 0.2 s per pulse including one-point DC measurement between pulses*Efficient software for system control and waveform data management*The software can control automatic probers for fast measurement of complete wafers*High performance and high quality components

Product

Automatic Voltage Transformer Comparator

KATC-V2

-

TESCO

KATC-V2 - TESCO

Knopp’s KATC-V2 is a highly accurate state-of-the-art voltage transformer comparator that is compatible with all older generation Knopp comparators, and is designed to be a direct, plug-in replacement with additional test set cables to fit in the existing Knopp Voltage Transformer Test Systems.

Product

12-300V AC Screwdriver Voltage Tester

5130

-

Peaceful Thriving Enterprise Co Ltd

5130 - Peaceful Thriving Enterprise Co Ltd

*Category: CAT II.*With CE and cETL Approval.*Check voltage on 12-300V AC.*Test for voltage and continuity.*Power by two LR44/L1154, 1.5V batteries.*Pollution degree: 2 (accordance with IEC 60664-1)

Product

Medium Voltage Products, Solutions, and Services

-

ABB Ltd.

ABB Ltd.

ABB provides a full range of medium voltage solutions for the utility, industrial and commercial customers with safe, reliable and smart technologies for the distribution of electricity.The extensive global offering includes distribution automation products, switching, limiting, measuring and sensing devices, switchgear, modular substation packages and related services.

Product

High Voltage Breakdown Test Sets

HT-Series

-

Lumetronics

HT-Series - Lumetronics

Dielectric Voltage Withstand Test or High Potential Test (HIPOT test) is a 100% production line test to verify the quality & electrical safety characteristics of products.

Product

Clamp type DC/AC Current Sensor／with Voltage Output

LAD-240

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

LAD-240 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Compact size*With DC voltage output*DC 1A～200A

Product

AC DC Current and Voltage Converters

-

Datexel

Datexel

The DAT5023 I is an AC or DC current converter, the input current range is selectable on order from 0-5Amps, 0-10Amps, 0-20Amps, 0-25Amps, 0-30Amps, 0-40Amps, 0-50Amps, 0-60Amps. It measure the current with the use of a Hall effect transducer. There is a coil (current transformer) inside the current converter which is isolated from the current input. The cable passes through the housing of the converter and the coil and the true root mean square measurement is taken from this coil then converted to a standard industrial signal output.

Product

FaithTech Ultra Low Voltage And High Current DC Load

NZ/N Series

-

Shenzhen FaithTech Technology Co., Ltd.

NZ/N Series - Shenzhen FaithTech Technology Co., Ltd.

Ultra low voltage and high current DC electronic load is a high reliability and high performance electronic load product derived from FT conventional electronic load for low voltage and high current test scenarios such as fuel cell test and CPU power supply device test. For different current levels, this product includes two series: NZ and N. The voltage is 0-20V or 40V, in which the NZ series can be loaded with 0V full current, and the N series can be loaded with ultra-low voltage and full current. The load capacity is up to 0V@1200A and 0.2V@5000A . This series of products has high precision and high cost performance, which is your good choice for testing.

Product

Voltage Logger0 to 25V DC

TV-4704

-

Gemini Data Loggers Ltd.

TV-4704 - Gemini Data Loggers Ltd.

The TV-4704 measures voltage from 0 to 25V DC and can be connected to a variety of industry standard sensors enabling the logging of a wide range of process parameters.

Product

Continuity of Insulation Tester (Low Voltage Method)

DYQ-005

-

Shanghai Dean Electrical Co., Ltd

DYQ-005 - Shanghai Dean Electrical Co., Ltd

Executive standard: GB/T4074.5-2008/IEC60851-5;Inspection standard: JB/T4279.12-2008Used to test the film continuity (namely the pinhole number of enamelled wire sample per unit length) of enameled round wires with nominal conductor diameter of0.050mmand below;The application of advanced SCM control allows for faster operation and stronger anti-interference capacity.

Product

Stand Alone Low Voltage Tester

Model 256/PC

-

Cablescan, Inc.

Model 256/PC - Cablescan, Inc.

Internal Memory: 8 program locations without test point labels or 2 program locations with test point labels. Removable Memory: 16 program locations without test point labels, or 4 program locations with test point labels.