Product

Portable Connector End Face Geometry Interferometer

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs’ Vytran® Connect-Chek® Interferometer automatically and precisely measures radius of curvature, apex offset of polish, and fiber undercut or protrusion on any PC or APC, single-fiber connector. The CC6000 interferometer uses a non-contact tilted-phase-analysis technique for fast, reliable measurements of connector end faces. This compact interferometer has a carrying handle and must be attached to a desktop or laptop computer (not included) with a standard USB 2.0 port for operation. The included CC6000 software, which is used to control the interferometer, can be installed on a computer with the minimum requirements in the table below. Designed for use in both the factory and the field, this interferometer provides crucial quality information needed to assure long-term performance of fiber optic connectors. One CC250P Mount for Ø2.50 mm PC Connectors and one RT250P Reference Tool for calibrating the CC250P mount are included with the CC6000 interferometer; mounts and reference tools that enable measurement of other PC or APC, single-fiber connectors are available separately below. When used with an appropriate mount for APC connectors, the CC6000 interferometer is also capable of measuring the APC angle and key error.

Product

20-Pin Scorpion Cable, Female to Unterminated, Tinned Ends, 30A, 0.5m

A020AFR-T-3A050

-

Pickering Interfaces Inc.

A020AFR-T-3A050 - Pickering Interfaces Inc.

This is a 0.5m long female to unterminated 20-Pin Scorpion cable assembly with tinned ends constructed from 37/0.4 (10AWG) Silver Plated Copper Wire with PFA insulation. Screwlocks are provided to secure the connector to associated product.

Product

HD 8 Line Crosshair / Line Generator

CL8800

-

MicroImage Video Systems

CL8800 - MicroImage Video Systems

The CL8800 has four X and four Y moveable lines. The lines can be set to black or white and each line can be turned off or on individually. Lines may be changed from solid to serrated with one of many lines styles. A lock switch is provided for each of the four controls to prevent accidental movement.

Product

Classic Collet | Black | With Line | Matt Or Glossy | Ø 14.5 Mm

021-3x20/5

-

ELMA Electronic, Inc.

021-3x20/5 - ELMA Electronic, Inc.

Secure plastic mounting cap for collet or wing knob

Product

Programmable Delay Line Instrument

XT-200

-

Colby Instruments, Inc.

XT-200 - Colby Instruments, Inc.

Built using the same technology that made Colby a trusted name, today the XT-200 stands as our flagship product. The XT-200 utilizes not one but two of Colby's patented trombone to offer precise programmable delay or phase shift for dual-channel requirements.

Product

PRO Banjo Pro Line Tester

TC-BJ100

-

Westek Electronics Inc.

TC-BJ100 - Westek Electronics Inc.

The Banjo Pro features convenient testing in both data and POTS environments. The black RJ45 plug is used for testing in eight conductor environments. "Just Flip It" to the red RJ11 plug for testing of two, four, and six conductor POTS environments.

Product

Transmission Line Pulse Testing

-

ESDEMC Technology LLC

ESDEMC Technology LLC

Transmission Line Pulse testing, or TLP testing, is a method for semiconductor characterization of Electrostatic Discharge (ESD) protection structures. In the Transmission Line Pulse test, high current pulses are applied to the pin under test (PUT) at successively higher levels through a coaxial cable of specified length. The applied pulses are of a current amplitude and duration representative of the Human Body Model (HBM) event (or a Charged Device Model – CDM – event in the case of Very Fast TLP, or VF-TLP).

Product

4 Port Phone Line Simulator (FXS) Adv

SIM-4FXS-A

-

Virtual Console, LLC

SIM-4FXS-A - Virtual Console, LLC

This unit has 4 analog phone lines (FXS) making it a perfect tool for testing VoIP gateways, IVR, modems, access servers, audio conference equipment or anything that requires phone lines. Telephone line simulator acts like a "telephone company in a box" providing dial tone, ring voltage and all advanced phone line features such Caller ID, Call Waiting, Call Hold, Three Way Calling and many others.

Product

Transmission Line Probes

-

Teledyne LeCroy

Teledyne LeCroy

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

Product

2 Port Analog Phone Line (FXS)

SIM-2FXS

-

Virtual Console, LLC

SIM-2FXS - Virtual Console, LLC

This unit has 2 analog phone lines (FXS) making it a perfect tool for testing VoIP gateways, IVR, modems, access servers, audio conference equipment or anything that requires phone lines. Telephone line simulator acts like a "telephone company in a box" providing dial tone, ring voltage and all advanced phone line features such Caller ID, Call Waiting, Call Hold, Three Way Calling and many others.

Product

Classic Collet | Gray | With Line | Matt Or Glossy | Ø 28 Mm

021-5x10/5

-

ELMA Electronic, Inc.

021-5x10/5 - ELMA Electronic, Inc.

Secure plastic mounting cap for collet or wing knob

Product

AC Line Separators

ALS-1

-

Standard Electric Works Co., Ltd

ALS-1 - Standard Electric Works Co., Ltd

● x10 Model allows for more accurate   measurements of low amperage devices.● Direct reading x1 mode.● 4mm Voltmeter input jacks.● Intergrated ground conductor.● 10 amp capacity.

Product

Hipot Line Testers

-

Compliance West USA, Inc

Compliance West USA, Inc

The newest product of our Hipot Line Testers, the UL Listed HT-S series hipot now comes with an adjustable ground continuity test in range of 0.08 - 1.50 , and Auto-offset for test leads up to 1.00 . Performs 0-2000 AC Hipot Test. Neutral/Hot to Ground Leakage current test up to 20 mA AC. Easy to use and connect. Ships complete with cables, manual, and a Calibration Certificate.

Product

Fixed/Dual Delay Line

Series 1000

-

Eastern-Optx

Series 1000 - Eastern-Optx

The EOX Series 1000 RF/Microwave Time Delay System is an economical, high performance, turnkey solution for radar test, wireless communications, Wi-MAX, and altimeter applications. The Series 1000 features ultra wide bandwidth, low loss, high isolation, low noise figure, and high dynamic range. Available with time delays up to 250 µsec and a top end frequency of 18 GHz.

Product

Wing Knob | Gray | With Line | Matt Or Glossy | Ø 14.5 Mm

023-3x10/5

-

ELMA Electronic, Inc.

023-3x10/5 - ELMA Electronic, Inc.

Secure plastic collet mounting wing knob with cap