Product

Light Meters

-

PCE Instruments

PCE Instruments

A light meter is a very sensitive electronic measuring device used to help monitor the illumination of any given area. Most light meter devices are small in size, simple to operate and equipped with an easy-to-read lighted screen made of special glass. Typically, a heavy-duty housing protects the light sensor inside the light meter from damage. A light meter is used for measuring brightness in lux (lx), foot candle (fc) or candela per square meter (cd/m²)measuring units. Some light meter devices are equipped with an internal memory or data logger to record and save measurements. The measurement of light intensity with a light meter is becoming increasingly important in the workplace due to safety concerns. Light measurement is also necessary to determine the best location and angle when installing and adjusting solar panels.

Product

Laser Spectrum Analyzer

771 Series

-

Bristol Instruments, Inc.

771 Series - Bristol Instruments, Inc.

The 771 Series Laser Spectrum Analyzer from Bristol Instruments combines proven Michelson interferometer technology with fast Fourier transform analysis resulting in a unique instrument that operates as both a high-resolution spectrum analyzer and a high-accuracy wavelength meter. With spectral resolution up to 2 GHz, wavelength accuracy as high as ± 0.2 parts per million, and an optical rejection ratio of more than 40 dB, the model 771 provides the most detailed information about a laser’s spectral properties.

Product

Light Collection / Injection For STEM

Mönch

-

Attolight AG

Mönch - Attolight AG

The Mönch add-on is a unique tool that can operate in either a light collection or light injection mode, thanks to its specific mirror design. In addition, the flexibility of the add-on allows an external coupling either in free space or via an optical fiber.

Product

LilyPad Light Sensor

-

SparkFun Electronics

SparkFun Electronics

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied on the sensor, more current will flow from the board through the signal tab to the microcontroller you connect the sensor to. If the sensor receives no light, no current will flow through it. In a typical indoor lighting situation, the sensor will output around 1 to 2V. Adding this board into your next e-textile or wearable project will really open up the possibilities by being able to incorporate light level sensing capabilities.

Product

CO2 Laser Marker

LP-400

-

Panasonic Industrial Devices Sales Company of America

LP-400 - Panasonic Industrial Devices Sales Company of America

The LP-400 Series is a CO2 Laser Marker best suited for glass and most plastic applications.

Product

Ultra-slim Light Curtain [Type2 PLc SIL1]

SF2C

-

Panasonic Industrial Devices Sales Company of America

SF2C - Panasonic Industrial Devices Sales Company of America

The Ultra-Slim SF2C Light Curtains have a thickness of only 13.2mm, come in an ultra-light polycarbonate enclosure and features easy installation and reduced wiring. They are available as a hand protection type with a beam pitch of 20mm, allowing users to detect objects as small as 25mm in diameter. SF2C Light Curtains are delivered with a 3-meter cable and mounting brackets (MS-SFC-1).

Product

Robust Safety Light Curtain [Category4 PLe SIL3]

SF4B-□G Ver.2

-

Panasonic Industrial Devices Sales Company of America

SF4B-□G Ver.2 - Panasonic Industrial Devices Sales Company of America

SF4B-G Safety Light Curtains, Type 4, PLe - Robust Design

Product

Programmable DC Current Source

Model 121

-

Lake Shore Cryotronics, Inc.

Model 121 - Lake Shore Cryotronics, Inc.

The Model 121 programmable DC current source is a precision instrument suitable for bench-top use or panel-mounted operation in labs, test facilities, and manufacturing environments. It provides a low-noise, highly stable source of current up to 100 mA, with convenient manual selection through 13 pre-set output levels, each representing a ten-fold change in power when attached to a resistive load. A “user” setting allows the current output to be defined anywhere within the operating range of the unit, from 100 nA to 100 mA.

Product

Laser-Driven Light Source (LDLS)

EQ-77

-

Energetiq Technology, Inc.

EQ-77 - Energetiq Technology, Inc.

Based on the highly successful Laser-Driven Light Source (LDLS)technology, the EQ-77 offers the highest radiance and irradiance availablein a truly broadband white light source. The EQ-77 features a compact lamp house, with clean construction that ensures long life and ultimate stability. With a 170nm-2100nm wavelength range, and a choice of source dual-beam output or a single-beam output with retro-reflector, the EQ-77 is flexible for a broad variety of applications. Researchers using light for imaging and analytical spectroscopy in a variety of applications in the life sciences and materials sciences need light sources capable of providing extreme high brightness and power across a broad wavelength range.

Product

Chemical Downstream Plasma Source

-

MKS Instruments

MKS Instruments

The AX7610 is a microwave plasma source for remote plasma applications. With replaceable quartz or sapphire plasma tubes, the AX7610 downstream source offers configuration flexibility to meet the most demanding application process parameters. The quartz tube version is ideally suited for production of atomic oxygen, nitrogen or argon. The sapphire tube version is compatible with much more severe CF4 CHF3 and NF3 chemistries.

Product

DC Power Source for Standard Lamp

DC502

-

Lisun Electronics Inc.

DC502 - Lisun Electronics Inc.

DC502 is CONSTANT CURRENT DC POWER SUPPLY for standard lamp. Function and technical indexes are as follows: • output voltage 4 grades: 6V/12V/24V/50V • output current: DC 0~2.5A (adjustable) • Output current drift at full scale: ±0.05% reading value/10 mins • Monitor range of ampere meter: 0.0000A ~1.9500A, 1.950 A ~2.500A • Accuracy of ampere meter: ± (0.08% reading value + 0.02% full scale) • Max output power: 80W • Continuous working time: 8 hours • Work environment: Temperature 0℃ -25℃, humidity ≤ 85%R.H, supply source: AC220 ±10%, 50/60HZ • Holding conditions: -20~50℃ humidity < 75%R.H • Outside dimension (W×H×D): 333mm×114mm×307mm • Weight: about 8kg • Power: about 1000VA

Product

Sound Source Localization

-

HEAD acoustics GmbH

HEAD acoustics GmbH

In order to optimize product sounds, it is necessary to know the exact point of origin of a sound source. This makes possible to identify the cause of disruptive sound components and rectify these effectively, optimize sound radiation and thereby achieve the desired sound experience. The ease of use and advanced beamforming algorithms of the HEAD VISOR acoustic camera allow sound sources to be located precisely at the blink of an eye.

Product

Ultra-Narrow Linewidth, CW TI: Sapphire Laser with Integrated Green Pump Laser

SolsTiS PI

-

M Squared Lasers

SolsTiS PI - M Squared Lasers

An evolution based on our heritage in industrial semiconductor applications, SolsTiS PI combines our award-winning SolsTiS titanium sapphire laser with our Equinox green pump laser into a single, integrated platform offering unprecedented levels of stability, compactness and ease of use while retaining all the benefits of the continuous-wave, ultra-narrow linewidth and broadly tunable architecture that SolsTiS is known for.

Product

Bi-Directional Alignment Laser

LA-01MB-AK

-

F&K Physiktechnik GmbH

LA-01MB-AK - F&K Physiktechnik GmbH

These bi-directional alignment lasers allow Quick & Easy adjustment of optical experiments and optical sets.

Product

CO,CO,light and Sound Measurement

-

Testo AG

Testo AG

Everyone is exposed to different environmental influences in their day-to-day lives. For example, in an average workplace illuminance, sound level, and indoor air quality are all significant factors that influence people's performance and well-being. Testo offers suitable measuring instruments for controlling each of the measurement parameters of lux, sound, and CO2 (for indoor air quality).

Product

Three Phase AC Voltage Source

EAC-TAVS

-

Electronic Test & Power Systems

EAC-TAVS - Electronic Test & Power Systems

The EAC-TAVS is a series of programmable high power AC voltage sources. Each system provides a three phase true sinewave output as standard. Each unit is built in a freestanding cabinet. The output frequency is adjustable in the range of 45 - 105Hz. Different frequency ranges are optional, with up to 805Hz possible. An RS-232 and CAN interface are provided as standard. The high resolution TFT front panel displays a host of measurement and setting functions. Besides standard models, other nominal power levels and voltages can be user specified. Single phase and bidirectional versions are available on request.

Product

Amplified Spontaneous Emissions (ASE) Sources

-

Apex Technologies

Apex Technologies

The AP505xA series, high power ASE sources provide stable output power up to + 23dBm and broad flat spectrum over C+L band or T band. They enable effective and efficient measurements for component characterization or optical sensing. Finally, these products are proposed in friendly-user stand alone benchtop instrument with touch sensitive screen, GPIB, ethernet, RS-232 or USB controls.

Product

Optical Talk Set (Optical Phone & Light Source)

X-5010

-

Shinho Optics Limited

X-5010 - Shinho Optics Limited

This is an efficient instrument that combines in one set the functions of both a digital optical phone and a stabilized light source. It is widely used in operations of installation, optical testing, maintenance, CATV and Telecommunication network. It can carry out full-duplex communication with high quality connection and not be affected by distance. With comfortable hand feelings, and nice outside looking, the user can easily operate on this optical tester.

Product

Optical Laser Source

SAT-3E

-

Shaanxi Aitelong Technology Co., Ltd

SAT-3E - Shaanxi Aitelong Technology Co., Ltd

SAT-3E optical laser source fits to optical power meter to measure fiber loss and evaluate transmission performance. They are indispensable tool for optical network installation, trouble shooting, maintenance and widely used in LAN, WAN, CATV, remote optical network, etc.

Product

Lasers FP/DFB-LDs For OTDR

-

Renesas Electronics Corp.

Renesas Electronics Corp.

C is a 1 650 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) pulsed laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of Optical Time Domain Reflectometer (OTDR).

Product

Digital Light Meter, Calibrated

93-172-C

-

Greenlee Tools

93-172-C - Greenlee Tools

Measures incandescent, fluorescent, metal halide, high-pressure sodium and halogen lampoutput. Color and cosine-corrected for enhanced accuracy. Measures up to 50,000 lux. Peak and data hold means no lost measurements. Accessories included: (1) 9V battery and carrying case. Lifetime Limited Warranty.

Product

USHIO Infrared Laser Diodes (705nm - 852nm)

-

The Optoelectronics Company Ltd

The Optoelectronics Company Ltd

USHIO OPTO's new 705nm, 40mW laser diodes, HL7001MG and HL7002MG are the first ever 705nm semiconductor lasers and are suitable for biomedical light sources. For more information, see HL7001MG/7002MG overview.