Product

Hand-In Type Electromagnetic Anechoic Box (Shield Box)

MY3710HS

-

MICRONIX

MY3710HS - MICRONIX

Higher shielding performance than MY371080dB. Suitable for weak electric field resistance test, out-of-service test or digital forensics for mobile phone, smart phone or tablet terminal! DUT can be operated directly with bare hands while placing it in the box and looking at the inside from the shield window.

Product

Hand-In Type Electromagnetic Anechoic Box (Shield Box)

MY3720

-

MICRONIX

MY3720 - MICRONIX

Suitable for weak electric field resistance test, out-of-service test or digital forensics for smart phone, tablet terminal or mobile PC ! !DUT can be operated directly with bare hands while placing it in the box and looking at the inside from the shield window.

Product

Anechoic chambers

-

EMCTEST

EMCTEST

The anechoic chambers are built up as a modular construction. Due to individual modules any size of chamber can be manufactured. Big chambers may require an outer supporting structure or alternatively the shielding material can be attached direct to the building. The absorbers are fixed to rails bars or wooden base construction which is inserted into the shielding modules.

Product

Junction Boxes

-

Teledyne Marine ODI

Teledyne Marine ODI

Junction boxes are used for complex power and signal distribution. The junction boxes have redundant mechanical barriers. The mechanical integrity of the junction box is verified during helium leak testing and hydrostatic testing of the jumper assembly. Thermal and pressure compensation is provided by the radially compliant hose or by purpose built bladder compensators, hose lengths must be sized according to the junction box internal dead volume.

Product

Shield Boxes

-

Shenzhen Tojoin Communication Technology Co., Ltd.

Shenzhen Tojoin Communication Technology Co., Ltd.

1: Make a ideal solutions for bluetooth, wifi, 4G phones test 2: High isolation 3: Easy & Flexible operation

Product

Breakout Boxes

D Series

-

Silver Engineering, Inc.

D Series - Silver Engineering, Inc.

The D Series Breakout Boxes incorporate a printed circuit board for all connectivity. D Series Breakout Boxes use a color coding scheme as an aid. The Red jacks connect to the Red TP Side connector with pin contacts and the Black jacks connect to the Black TP Side connector with socket contacts.

Product

RF Shielded Box

LTL Q20001

-

Liveon Technolabs

LTL Q20001 - Liveon Technolabs

LTL Q20001 RF Test Enclosure is the streamline solution to manage your RF Testings. LTL Q20001 RF shielded test enclosure can comfortably house the intermediate and large devices on test such as Laptops, larger test Fixtures and other large RF devices.LTL RF Enclosures are available in aluminum and stainless steel models and come with a specialized EMI gasket which enables stable and effective RF shielding performance in all frequency bands.

Product

AID Box Camera

TrafiBot HD

-

Teledyne FLIR

TrafiBot HD - Teledyne FLIR

FLIR TrafiBot HD combines field-proven video detection algorithms with advanced camera optics and powerful processing technology in a single box camera. TrafiBot HD (with 1920 × 1080 resolution) provides superior image quality, embedded AID analytics, as well as multi-stream encoding. TrafiBot HD’s advanced processing unit generates traffic data and incident detection information and thus supports traffic operators with alerts on stopped vehicles, wrong-way drivers, pedestrians, lost cargo, smoke, and traffic flow data.

Product

Custom Breakout Boxes

-

Silver Engineering, Inc.

Silver Engineering, Inc.

Silver Engineering, Inc. has also provided many different forms of custom breakout boxes and adaptor cables to our customers. If you need something special, contact us.

Product

RF Shielded Box

LTL A6001

-

Liveon Technolabs

LTL A6001 - Liveon Technolabs

LTL A6001 RF Test Enclosure is the streamline solution to manage your RF Testings. LTL A6001 RF shielded test enclosure can comfortably house the intermediate device on test.LTL RF Enclosures are available in aluminum and stainless steel models and come with a specialized EMI gasket which enables stable and effective RF shielding performance in all frequency bands.

Product

TEST BOX

6280 TB

-

Standard Electric Works Co., Ltd

6280 TB - Standard Electric Works Co., Ltd

● Wide range of operating voltage from AC 210V/50Hz to 250V/50Hz.● For checking AC voltage.● For checking a RCD tester's test current & time in mA(ms).● For checking a loop tester.● For wiring check (Phase, Neutral, Earth).● For checking continuity.● For checking insulation (The maximum is 1.2kV).● For checking UK16th edition.● Safety standard: EN 61010-1 / EN 61326-1

Product

Connector and Breakout Box

ES4640

-

ETAS GmbH

ES4640 - ETAS GmbH

The ES4640 Connector Box offers a standardized wiring and connectivity for HiL testing systems in the powertrain domain. Its front panel provides connectors for the ECU, CAN bus communication, on-board diagnostics, and LEDs for ignition and injectors. Its rear panel connects loads, failure simulation, and other components. Sample applications of the ES4640 are closed loop HiL systems for 8 cylinder gasoline and diesel engine ECUs.

Product

Resistor Calibration Boxes

RCB-3-1T(A)

-

Standard Electric Works Co., Ltd

RCB-3-1T(A) - Standard Electric Works Co., Ltd

● The RCB-3-1T is used to verify and proof any High Voltage    Insulation Testers. It can be utilized to calibrate all High Voltage    Insulation Testers very accurately Analogs or Digitals.● Some institutions and large industries requested their own calibrator    too, therefore, SEW started manufacturing the RCB for special    customers.

Product

DI Boxes

-

Applied Research and Technolgy

Applied Research and Technolgy

Instrument DIs for stage and studio, plus specialized tools to connect virtually any source to a mixer, interface, or PA.

Product

Breakout Box

T1000-62HD

-

Tesuto Systems

T1000-62HD - Tesuto Systems

Our most expansive breakout box, using dual High Density 62 pin D-Sub connectors for signal capture or monitoring. Dual connectors provide a total of  124 test points plus a ground jack. All test points use standard size 4mm banana jacks. Test points may be connected using shorting banana cable to allow signal continuity.

Product

Breakout Box

T1000-37

-

Tesuto Systems

T1000-37 - Tesuto Systems

T1000-37  breakout box is our most versatile model, using dual 37 pin D-Sub connectors for signal capture or monitoring. Dual connectors provide a total of  74 test points plus a ground jack. All test points use standard size 4mm banana jacks. Test points may be connected using shorting banana cable to allow signal continuity. Ideal for continuity measurements, isolation testing, and signal capture.

Product

Junction Boxes

-

VPG Transducers

VPG Transducers

Load cell junction boxes come in different types to suit various applications. Passive analog junction boxes are simple and cost-effective, requiring no external power. Active analog junction boxes include signal amplification, making them ideal for long cable runs.

Product

Trigger Box

AT101

-

AMCAD Engineering

AT101 - AMCAD Engineering

The AT101, Trigger Box is a TTL / CMOS signal combiner able to generate a fixed TTL signal of 1µs pulse width with a minimum period of 2µs. The output TTL signal can be used for different applications like: Standardize and boost up the instrument trigger signal, Fast Power Sweep application.

Product

Anechoic Chambers

-

Eckel Noise Control Technologies

Eckel Noise Control Technologies

Anechoic Chambers are echo-free enclosures with a sound energy absorption level of 99% to 100%, or a reflected sound pressure level of 10% or less. The frequency at which the energy absorption drops below 99%, or the pressure reflection exceeds 10%, is known as the low-frequency cut-off. Sound absorption is obtained by lining the walls, ceilings, and floor with wedges or other sound absorbing elements or SuperSoft panels, depending on performance level required and cut-off desired.