Back Planes
An interconnection structure allowing multiple printed circuit boards to coexist using a single bus.
-
Product
Industry Pack Carriers and Digital I/O
CPCI-4SIP-6U
Digital I/O
The CPCI-4SIP-6U module provides a high performance flexible I/O scheme, that supports industry standard Industry PacksÔ. For application requiring low cost, high density I/O or unique combinations, the CPCI-4SIP-6U is the perfect solution. There are four (4) Industry Pack sites providing up to 200 I/O pins accessible from either the front panel or the rear back plane.
-
Product
80 Channel Relay Switch
DP-VXI-4503
-
DP-VXI-4503 is a 80 channel, one Form C (SPDT) relay switch designed as a C size VXI module. This high density switch module is designed with a register based interface occupying only one VXI slot. This module uses two Form ‘C’ relay switches. Out of the two contacts in each relay, one is used to provide the status of the relay through read back and the other is used for switching purpose.The user can write the command for the selected channels on to the primary latch of the FPGA section. Readback is available to confirm the selected commands. On command, the data from the primary latch is transferred to the secondary latch. The relay driver section provides the necessary drive to switch ON the relays. The buffers in this section drive the relay coils.This module features a back plane trigger for VXI triggered operation. On receipt of the back plane trigger the programmed relays will be energised/de-energised. Alternatively, software trigger can be used.
-
Product
Multifunctional Data Acquisition Systems
MS1201
-
This system used for multi-purpose applications such as data acquisition and Automatic Test Equipment. ATE Computer has ISA Bus based eleven slots with inbuilt power supply. Micro Processor board or USB Controller is used to drive the back plane.
-
Product
Signaling Control and Monitor Equipment
MS 1303
-
The Railway signaling unit is used to receive the input signals from the field for validating and clearing route for trains. After receiving the signals, signals are isolated and various tests are done inside the system to ensure the received signals reliability and produce clearance signal to railway line. For security reasons card signature has been given to each card in the system. System consists of digital input modules, digital output module, digital read back module, RS232 interface with 80486 processor board. It is an ISA Bus Back plane based system.
-
Product
Control and Switch Modules
Mini Mux
-
Eclypse International Mini Mux Control and Switch Modules, plus Software Developer Kit (SDK) provides high density test circuit switching as a complement to the Eclypse Circuit Analyzers. The Mini Mux Switching gives the user the ability to test continuity and isolation in complex assemblies with thousands of circuit paths (such as avionic back planes and chassis), while minimizing the test equipment complexity and footprint.
-
Product
Qualification Hardware & Sockets
-
Reltech Limited holds over 35 years’ experience in the design and manufacture of all types of qualification test hardware. Our advanced technology products include: HTOL Boards (Mother and Daughter cards) Burn-In Boards HAST Boards THB (humidity) Boards Burn-In Modules and frames Dynamic Driver cards (Digital, Analogue and Mixed signal) Back Planes Voltage regulator cards Custom electro-mechanical assemblies DUT Cassettes and test Fixtures
-
Product
USB BUS Controller Board
MS 1711
-
- 8 bit and 16 bit compatible Read and Write Cycles- Single or Block Memory and IO Write Cycles- Interrupt Cycle Generation- The generated bus cycles signals is compatible with ISA96 system back plane- External Reset- Double Euro Standard Board- Driver interface for Windows2000/XP/VISTA and LINUX OS
-
Product
Back Plane Tester
-
This machine is used to test back planes used in telecommunications central stations. An operator loads a completed point to point wired back plane onto a retractable shelf on the front of the tester. Table continues and the disk falls through a hole into the bin. The shelf is pushed back into the machine where it is held in place by pneumatic operated clamps. Then a series of pneumatic cylinders sequentially insert a test card into each location in the back plane. A remote instrument performs a complete point to point continuity, short and hi pot test on all connections in the back plane.
-
Product
Intel 80486 DX2 Processor Board
MS 1500
-
- PC 104 bus and ISA bus interface- Facilitates design of scalable architectural solution for Embedded System- Back plane eliminated by self-stacking PC 104 bus- Substantial reduction of development time, cost, as well as risk- Helps to Faster time-to-market / timely product productions- Used for LCA Simulation Project- Intel 80486DX2 @ 33MHz- 512Kbytes of STATIC RAM, 2048 Kbytes of FLASH PROMS- 64 Kbytes of DPRAM- External Interrupts- RS232 Serial Interface- Watchdog Timer- External Bus Interface
-
Product
ATE Computer
MS 1201
-
This system used for multi-purpose applications such as data acquisition and Automatic Test Equipment. ATE Computer has ISA Bus based eleven slots with inbuilt power supply. Micro Processor board or USB Controller is used to drive the back plane.
-
Product
Matrix
HLX
-
The HLX™ System is easy to configure to your exact requirements. It distributes HDTV signals up to 1,000 feet away to convenient zone receivers mounted wherever televisions are to be located. For audio systems, the HLX offers DSP and volume control per output (more about HLX for audio). Optional audio zone cards feed multi-channel amplifiers to distribute music to zones. Its robust back plane design allows up to 12 sources to distribute component video up to 1080p, along with analog stereo audio, digital coaxial audio, and digital optical audio. Four audio sources may be added, for a total of 16 source inputs. The new HLX offers a winning combination of performance, value, and unique features.
-
Product
Turning Mirror
10769A
Plane Mirror
The 10769A is ideal for use in laser measurement and calibration applications. In the calibration of slant bed lathes, for example, the beam steering mirror deflects the beam from the laser head upward, through the interferometer, along the lathe's cross slide. One or more mirrors can also create a path from a laser head to an interferometer located in an otherwise inaccessible position, as in the case of a milling machine with a table that moves in only one axis.
-
Product
Turning Mirror
10772A
Plane Mirror
The Keysight 10772A Turning Mirror is a 100% reflectance mirror that turns the direction of an incoming laser beam 90 degrees. The mirror is used in the 5530 Laser Calibration System for applications such as machine tool calibration. It can be used in place of the 10707A Beam Bender (6 mm or less beam diameter) for applications that require the larger aperture of the 10772A.
-
Product
Turning Mirror on Universal Mount
10769B
Plane Mirror
The Keysight 10769B Turning Mirror on Universal Mount deflects a laser beam at any angle, in either the vertical or the horizontal polarization plane of the beam. The 10769B contains the same turning mirror as the 10769A, but has a different mounting.
-
Product
Plane Mirror
10728A
Plane Mirror
The Keysight 10728A is a normal incidence plane mirror for beam diameters of 9 mm or less. It is a bare optic that requires a user-supplied mount. It is typically used with the 10735A and 10736A three axis interferometers.
-
Product
Multi-Sensor In Plane
MS 1000-IP-20
-
Advanced Thermal Solutions, Inc.
The MS 1000-IP-20 is a three-sensor probe designed for measuring fluid velocity and temperature in the same vertical plane. It eliminates the need for multiple probes or a traversing probe for determining the flow profile or distribution.
-
Product
Plane Mirror Converter
10722A
Accessory Kit
The Keysight 10722A plane mirror converter modifies the use of the 10702A linear interferometer. With an additional 10703A reflector, the 10722A converts the 10702A into a 10706A plane mirror interferometer. With an additional 10723A high-stability adapter, the 10722A converts the 10702A into an 10706B high-stability plane mirror interferometer.
-
Product
Single Plane Scanners
-
Specifically designed for retailers that require high performance in a compact, horizontal or vertical form factor, the single plane products are tailored for medium to high volume POS applications at an affordable price. These products are particularly effective for grocery, department, drug, do-it-yourself centers and general retail environments.
-
Product
Plane Mirror Interferometer
10706A
Differential Interferometer
The Keysight 10706A Plane Mirror Interferometer is a dual pass interferometer used for multiple axis applications such as X-Y stages where the measurement mirror may move perpendicular to the measurement axis. The unique contribution of the 10706A is its tolerance of angular misalignment of the plane mirror reflector. The 10706A can accept a range of measurement mirror angular alignment changes.
-
Product
High Stability Plane Mirror Interferometer
10706B
Angular Interferometer
The Keysight 10706B High Stability Plane Mirror Interferometer is a dual pass interferometer used for multiple axis applications such as X-Y stages where the measurement mirror may move perpendicular to the measurement axis. This thermally stable optic, an exact functional replacement for the 10706A Plane Mirror Interferometer, reduces thermal measurement drift to 1/12 the value typically achieved by conventional plane mirror interferometers. The unique contribution of the 10706B is its tolerance of angular misalignment of the plane mirror reflector. The 10706A can accept a range of measurement mirror angular alignment changes.
-
Product
Plane Mirror Reflector
10724A
Retroreflector
The Keysight 10724A reflector is used with the Keysight 10706A, 10706B, 10715A and 10716A interferometers for single-axis measurements. It can also be used with the Keysight 10737L/R Compact Three-Axis Interferometers. Alignment hardware is included.
-
Product
Push Back Probes V0406B300G15
1014167
-
The V0406B300G15 Push Back Probes are a cutting-edge solution designed for precision measurement and contact applications. Operating within a temperature range of -45°C to +100°C, these probes are constructed to deliver reliable performance across various environments. With a pitch of 4.00 mm (157 mil), they provide an excellent balance between size and functionality, making them suitable for tight spaces while ensuring accurate readings and connections.In addition to their basic contact functionality, these probes have impressive electrical specifications, capable of handling a continuous current of up to 8.00 A with a typical contact resistance of only 30.00 mOhm. The mechanical design boasts a preload of 400 cN, spring force of 1500 cN, and a nominal travel of 9.50 mm, allowing for greater versatility in applications. The materials used in the construction, such as beryllium copper for the plunger and gold plating, ensure durability and longevity, making the V0406B300G15 an essential tool for specialists in the field.
-
Product
Back Pressure Tester
TU29P
-
Enables Technician to test exhaust back pressure thru oxygen sensor. Oxygen Sensor adapter includes M12 & M18 thread.Special Gauge has two multi-colored bands - idle and 2500RPM, with pressures shown in PSA and bar.
-
Product
Push Back Probes (VF4) HVF4DS-30
1015615
-
The Push Back Probes (VF4) HVF4DS-30 delivers precision performance with a critical pitch of 4.0 mm, making it ideal for applications that require exact measurements and reliable operation. This product features a compact design with a total length of just 3.00 mm and an outer diameter of 3.60 mm, allowing for efficient integration into various systems and setups. The probe's construction ensures durability and consistent performance under typical operating conditions.
-
Product
Exhaust Back Pressure Tester
33600
-
Use to test for clogged or obstructed catalytic converters and mufflers. Fast and easy to use - threads into Oxygen Sensor Port. Includes 12mm and 18mm adapters to fit most domestic and imported vehicles. Gage measures 2 1/2" diameter and has dual scale: 15 PSI and 1.00 Kg/Cm2. Hose is 41" long.
-
Product
Push Back Probes (VF3) VF383B0008G05
1010202
-
The Push Back Probes (VF3) VF383B0008G05 is an essential tool designed for precision contact in various applications. With a compact design characterized by a pitch of 3.00 mm (118 mil), these probes operate efficiently in temperatures ranging from -45°C to +100°C, making them suitable for a wide range of environments. The critical functionality of the VF3 model is underscored by its continuous current capacity of 8.00 A and a typical contact resistance of just 30.00 mOhm, ensuring reliable performance and minimal signal loss in electrical applications.
-
Product
Push Back Probes (V04) V0417B180G15E33
1022440
-
The Push Back Probes (V04) V0417B180G15E33 are designed to deliver exceptional performance in a variety of applications. With a pitch of 4.00 mm and capable of operating within a temperature range of -45°C to +100°C, these basic contact probes ensure reliability even in challenging environments. Constructed with high-quality materials, including beryllium copper for the plunger and gold plating for both the plunger and barrel, they are optimized for durability and efficiency. The V04 series offers impressive mechanical specifications, including a preload of 400 cN, a maximum travel of 10 mm, and excellent pointing accuracy of ±0.10 mm, making them ideal for precision tasks.
-
Product
Test bench for Infrared Focal Plane Array detectors
BIRD
-
The BIRD bench enables characterization of any types of Infrared Focal Plane Array (IRFPA) detectors.
-
Product
Push Back Probe VF483B0010G10
1011495
-
VF483B0010G10 (item number 1011495) is a Push Back Probe for checking the mechanical locking of a terminal within its connector housing. VF483B0010G10 can verify that a terminal remains securely locked in the connector housing and is not pushed back beyond the permitted position during contacting. VF483B0010G10 combines a pitch of 4 mm / 157 mil with tip style 83 (SpadeØ > plungerØ) and a tip diameter of 2.5 mm. VF483B0010G10 operates with 1000 cN spring force and 5 mm nominal travel. VF483B0010G10 is specified for 10 A continuous current.
-
Product
Push Back Probes (VF100) VF10084B0001G15
1005128
-
The Push Back Probes (VF100), particularly model VF10084B0001G15, stand out with their exceptional design tailored for precision and reliability. With a basic contact probe design, the VF100 is engineered to operate effectively within a temperature range of -45°C to +100°C, making it ideal for various applications that require robust thermal performance. The probe features a pitch of 2.54 mm (100 mil), ensuring compatibility with a wide range of devices and connectors. Its ability to handle continuous currents of up to 5.00 A highlights its suitability for demanding electrical tasks, providing a typical contact resistance of only 30 mOhm, which minimizes energy loss and enhances overall system efficiency.
