Static Code Analysis
-
Product
Handheld Water Quality Analysis Tool
PoolPro™ PS6FCᴱ & PS9TKB
-
The fastest, most accurate, reliable, easy-to-use handheld water quality analysis tool for any pool or spa. POOLPRO™ does the job of up to nine tests in one easy to use instrument:*Monitor disinfectant residuals*Determine water balance corrections*Calibrate equipment*Ensure proper TDS levels in saltwater chlorine generator
-
Product
PXI-6704, 16-Bit, 32-Channel, Static PXI Analog Output Module
777796-01
Analog Output Module
16-Bit, 32-Channel, Static PXI Analog Output Module—The PXI‑6704 is a static analog output device. You can use the PXI‑6704 to create software-timed voltage and current output applications. You can independently set the output voltage range on each channel. The PXI‑6704 also includes eight 5 V TTL/CMOS digital I/O lines.
-
Product
Spectrum Analysis, Up To 43.5 GHz
S930904B
-
The S930904B spectrum analysis adds high-performance microwave spectrum analysis to the N522xB/N523xB/N524xB PNA network analyzer family up to 43.5 GHz.
-
Product
Testability Analysis
TurboCheck
-
TurboScan is an advanced full-scan and partial-scan test suite. It includes a Scan Synthesizer and an Automatic Test Pattern Generator (ATPG). TurboScan automatically repairs testability violations to make your design highly testable.
-
Product
Recording and Analysis Software
DataVu-PC
-
DataVu-PC analysis software is specifically designed for record and playback applications and makes short work of searching through large datasets for any signal of interest. You can use triggers to start recording, minimize storage requirements using windowing, and automate your signal search with tools like frequency mask, pulse descriptor words and smart markets.
-
Product
Signal Analysis
Synchronous Accumulation (Order Analysis)
-
Order analysis is one of the most convenient and efficient methods for diagnostics and balancing of rotating mechanisms and transmission gears. With an RPM sensor and a vibration sensor, it is possible to study the time characteristics of gear vibration signals. It is a well-known fact that a signal from a vibration sensor is affected by signals from other sources. To tune out from the disturbing signals, the synchronous signal accumulation method is used. For each shaft rotation, the RPM sensor provides a rotation mark. This signal serves as a triggering strobe for the vibration sensor signal sweeping. The obtained signal sweeps are combined. All the sources of the signals related to the shaft frequency (frequency of rotation) are accumulated and increased in the accumulator linearly proportionally to the N number of rotations. All other signals that are not correlated with the shaft frequency are accumulated proportionally to N1/2 and in case of a greater number of averagings, the useful signal exceeds the interference level.
-
Product
FTT Analysis Software
DS-0321A
-
The DS-0321 is basic software for frequency analysis. With this software, you can resolve time-axis waveform into each frequency, and observe the level of each component. It fits the purpose of resonance frequency observation or careful observation of sound frequency component.
-
Product
Analysis Tool
CANalarm
-
The CANalarm is a low priced analysis tool that can be installed in the bus permanently. It makes it possible to build up a separate and redundant monitor without change of configuration and program of the master controller. It works passive and is therefore non reactive
-
Product
Data Collection And Analysis Software
-
The MESUR™ software series expands the functionality of Mark-10 force and torque gauges, indicators, testers, and test stands. MESUR™ Lite is a basic data acquisition program included free with all Mark-10 products, while MESUR™gauge is a more advanced software package which also plots, calculates statistics, generates reports, and provides other analysis tools. MESUR™gauge Plus adds motion control of certain test stand models.
-
Product
Code Complexity Measurement Tool
CMT Java
-
The Code complexity measurement tool Testwell CMT++ (for C, C++ and C#) and Testwell CMTJava (for Java) saves costs and avoids software erosion. For this reasons several standards (like ISO 26262) require the enforcement of low code complexity.
-
Product
Image Quality Analysis
-
Quality Engineering Associates Inc.
Historically, print and image quality evaluation has been hampered by reliance on subjective judgment and guesswork. But not any more. QEA has developed a full line of quantitative, reliable image analysis tools, encompassing sophisticated, fully-automated camera-based systems, automated scanner-based systems, portable hand-helds for distinctness of image (DOI) measurements, and a portable color measurement toolkit.
-
Product
Material Analysis Instrument
-
Thermogravimetric Analysis measures the amount and rate of change in the weight of a material as a function of temperature or time in a controlled atmosphere.
-
Product
Thermalyze Extension for Steady State Analysis
Lock-In
-
Steady-state thermography is limited to detecting hot spots that heat up a minimum of 100 mK (0.100°C). This may be useful for locating shorts on high-power devices, but is inadequate for detecting low power defects such as semiconductor device leakage current or short circuit with very low or very high resistance. Steady-state thermography also suffers from poor spatial resolution as the heat from localized hot spots diffuses rapidly, blurring the location of the heat source.
-
Product
Sound and Vibration Real-Time Analysis System
DS-3200 series
-
The DS-3000 series Data Station is a PC-based FFT Analyzer with high functions and high performance. This new FFT Analyzer has two times or more of real-time analysis capability compared to the existing model the DS-2000 series, having the high-speed calculation performance, reliability, and user-friendliness based on our accumulated experience.
-
Product
Single or Multi-track Spectrum Analysis
FreqAnalyst Pack
-
Get all you need to analyze the spectrum of your audio projects: the Blue Cat's FreqAnalyst Pro plugin offers you high precision and advanced audio to MIDI CC capabilities for single track spectral analysis, and Blue Cat's FreqAnalyst Multi is a unique solution for multi-tracks spectrum monitoring. These plugins will help you see what you cannot hear.
-
Product
DisplayPort v1.3 Protocol Analysis Probe
FS4500
-
The FuturePlus FS4500 DisplayPort Analysis Probe provides a mechanical, electrical and software interface to the DisplayPort bus, a digital display interface standard supported by the Video Electronics Standards Association (VESA). The FS4500 is used to design and debug computer motherboards, monitors, home theater systems, and silicon chips incorporating DisplayPort technology.
-
Product
Fat Analysis
-
Unlike standard x-ray systems which use a single x-ray energy spectrum to scan products, DEXA technology uses two energy spectrums to discriminate between high and low energy x-rays. A patented software algorithm uses the differential x-ray energy absorbance of these two energies by the meat to determine the fat content.
-
Product
Water Hydrazine Analysis
AHM550
-
Prolonging boiler operating life and reducing unplanned maintenance through accurate hydrazine dosing.The Navigator 500 Hydrazine analyzer provides a continuous measurement of the level of hydrazine in boiler feedwater, enabling the chemical dose to be controlled automatically. This avoids both the expense associated with overdosing and the costly corrosion damage caused by under-dosing.
-
Product
Contamination Detection and Analysis
-
Contamination testing, detection, analysis, troubleshooting and resolution expertise to minimise downtime, maintain customer confidence, for quality & safety
-
Product
IRIG Time Code Receiver for Computers (PCI Express)
TCR180PEX-EL
-
Meinberg Funkuhren GmbH & Co. KG
The TCR180PEX-EL receives IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes and can be used for synchronizing the system time of its host PC. The IRIG output of this card can generate an IRIG signal for other IRIG time code readers. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements).
-
Product
Vapor Sorption Analysis
-
Vapor Sorption Analysis is a technique in which a sample is subjected to varying conditions of humidity and temperature, and the response of the sample is measured gravimetrically. Understanding the effects of water content on structure and properties is critical in the development, processing and end use of a broad spectrum of materials. TA Instruments offers the most sensitive, versatile, and productive moisture sorption analyzers on the market. The Discovery SA combines a high-sensitivity thermobalance, innovative humidity control chamber, and reliable autosampler. Innovative technology combined with our unparalleled reputation for service and support make TA Instruments the clear choice of scientists worldwide for vapor sorption studies.
-
Product
Rotating Machinery Analysis
-
The Rotate software package is part of the m+p Analyzer Software for noise & vibration measurements and analysis. It provides a wide range of data acquisition and analysis tools for capturing and understanding noise and vibration induced in rotating and reciprocating machines by their motion. Fixed and variable speed machines are accommodated as are both structural vibration and condition monitoring diagnostics. Multiple tacho inputs can be processed for accurate speed tracking during analysis. Spectral mapping, order tracking, time history and orbit data analysis are all available.
-
Product
Manual Media Analysis Solutions
-
Truly one tool to view them all. The Ultimate Analyzing Tool for manual in-depth analysis, verification and validation of various file formats and containers. Metadata extraction and stream manipulation available.
-
Product
PCI POST Code Display
post4d
-
During power on self-test (POST), most PC BIOSes will write diagnostic codes to port 80h or port 84h (jumper selection). Use post4d to display these codes on a dual digit LED display. Additional LEDs indicate the status of the power supply rails. Convenient business card size.
-
Product
Organic Elemental Analysis
-
Elementar Analysensysteme GmbH
Carbon, hydrogen, nitrogen, oxygen and sulfur are the basic elements of living nature. Their quantitative determination in the most versatile combinations of substances, the elemental analysis, is the origin and essence of the Elementar product portfolio.
-
Product
Video, Audio & Time Code Distribution Amplifiers
-
ESE has an extensive line of Distribution Amplifiers for both Video, Audio and Time Code. Our popular ES-207A is a small 1 x 4 video DA which can be tucked away anywhere. Other models have 1 x 8 and 1 x 12 capability. Rack-mount, PC card and "black box" configurations are available.
-
Product
IRIG Time Code Receiver & Generator for Computers (PCI Express)
TCR180PEX
-
Meinberg Funkuhren GmbH & Co. KG
The TCR180PEX receives IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes and can be used for synchronizing the system time of its host PC. The IRIG output of this card can generate an IRIG signal for other IRIG time code readers. The output format is independent from the incoming IRIG signal - a perfect solution to your IRIG conversion requirements. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements) or as an IRIG converter device.
-
-
Product
The Leading Measurement System for the Analysis of Porous Materials
ELWIS
-
ELWIS (Evaluation of Light Weight Impedance System) offers a full and rapid characterization of porous materials based on the analysis of a single sample. The ELWIS system consists of the ELWIS-A and ELWIS-S components which can be used independently from each other although both applications are needed for a complete material simulation.ELWIS-A measures acoustic parameters that are needed to evaluate the acoustic performance of sound insulation and sound-absorbing multi-layer materials. An additional impedance tube for absorption measurements at higher frequencies is available for ELWIS-A.ELWIS-S measures structural parameters that are needed to simulate the dynamic and acoustic behavior of sound packages in the medium to low frequency range (including the "Poisson Ratio" for foam materials).ELWIS is very easy to operate: Thanks to its user-friendly software, the system can also be used to obtain reliable results by users with only limited experience in the characterization of porous materials.
-
Product
Circuit Breaker Analysis System
-
Weshine Electric Manufacturing Co., Ltd
1. Time measurement: 12 fracture intrinsic points, closing time, with the same period, phase with the same period.2. Reclosing measurement: each fracture closing - minute, minute - closing, minute - closing - minute process time, one minute time,one closing time, two closing time, gold short time, no current value.3. Bounce measurement: closing bounce time, bounce times, bounce waveform of each fracture, rebound amplitude of each fracture.
