Product

(AOI) Automated Optical Inspection Systems

-

VisionX Inc.

VisionX Inc.

For automated defect detection and high-accuracy measurements. VisionGauge Online High-Speed AOI systems are perfect solutions for demanding high-throughput, high-resolution applications. These systems are perfect for a wide range of applications including MicroElectroMechanical systems (for MEMS inspection or MEMS measurement), semiconductor & discrete device inspection and measurement.

Product

Fiber Optic Transmitter/Receiver & Repeater Board

-

VI Control Systems Ltd.

VI Control Systems Ltd.

To be used with 1000 micron plastic fiber optic cable. Fiber distance should be limited to 40 meters unless special low-loss fiber is used. These units can be used as repeaters to go greater distances.

Product

Handheld Optical Refractometers

-

Reichert Analytical Instruments

Reichert Analytical Instruments

From agriculture, to food and beverage, to veterinary and automotive fluids.

Product

Fiber Optic Light Source

-

FS

FS

A device that emits controlled light signals (such as LEDs or lasers) into fiber optic cables.

Product

Fiber Optic Multiplexer

FAC1000/2000

-

GE Vernova

FAC1000/2000 - GE Vernova

The FAC 1000/2000 is a multiplexer oriented to multi-point communication with several devices using fiber optic. It provides one or two inputs and multiple outputs.

Product

PXI Dual 2 x 2 Fibre Optic Mux MU

40-860-322

-

Pickering Interfaces Inc.

40-860-322 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

Swept Test System For Optical Components

-

Santec Corporation

Santec Corporation

measurement platform for optical components with a fastscan speed, high resolution and accuracy. The systemcombinesour tunable lasers, polarization controller, power meter and software.

Product

Optical & Vision Systems

-

Fowler High Precision, Inc.

Fowler High Precision, Inc.

Usually made up of every component that is needed to acquire and analyze an image in order to perform the intended task.

Product

Beam Directing and Reflecting Optics

-

Keysight Technologies

Keysight Technologies

Beam directing and reflecting optics simply reflect, bend or translate the beam, but do not typically modify the polarization, except for polarizing beam splitters. For example, mirrors, cube corners and retroreflectors are attached to objects that move in order to keep the weight down on the moving object (instead of mounting the interferometer on the moving object).

Product

Handheld Optical Fiber Identifier

JW3306D

-

Shanghai Joinwit Optoelectronic Tech,co.,Ltd

JW3306D - Shanghai Joinwit Optoelectronic Tech,co.,Ltd

JW3306D Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with fault location function. Useing the macro bending technology on line for nondestructive testing, JW3306D can measure the signal direction and power and avoid misoperation resulting in interrupted lines.

Product

PCIe Digital I/O Board, 64 Optically Isolated I/O Channels, 24V

APCIE-1564

-

TEAM SOLUTIONS, INC.

APCIE-1564 - TEAM SOLUTIONS, INC.

32 digital inputs, 24 V, isolated16 interruptible inputs32 digital outputs, 24 V, isolated, 10 to 36 V, 500 mA/channelOptical isolation 1000 VWatchdog for resetting the outputs to "0" (when Power-On)Protection against fast transients, overvoltage, electrostatic discharge and high-frequency EMIInputs: voltage reversal, input filtersOutputs protected against short circuitOvertemperature and overvoltage protectionDiagnostic report in case of short circuits, overtemperature, voltage drop ...24 V power outputs with protection diodesShutdown logic when the external supply voltage drops below 5 V

Product

Fiber Optic Loopback

LC/SC/MTRJ

-

Huihong Fiber Inc

LC/SC/MTRJ - Huihong Fiber Inc

Fiber Loopbacks is designed to provide a media of return patch for a fiber optic signal; typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a technique for isolating a problem.

Product

Handheld Optical Multimeter

JW3209

-

Shanghai Joinwit Optoelectronic Tech,co.,Ltd

JW3209 - Shanghai Joinwit Optoelectronic Tech,co.,Ltd

JW3209 Handheld Optical Multimete integrates the functions of an intelligent optical power meter module and of a highly stable light source module in one unit. It can also provide data storage and upload functions. It is widely used in installation ,measurement and maintenance of DDN, Telecom and CATV networks.

Product

SF6 Optical Gas Imaging Camera

FLIR GF306

-

Teledyne FLIR

FLIR GF306 - Teledyne FLIR

The FLIR GF306 optical gas imaging camera visualizes sulfur hexafluoride (SF6) and other gas emissions without the need to shut down operations. SF6 is used in the electric power industry as an insulator and quenching medium for gas-insulated substations and circuit breakers. The portable, non-contact GF306 allows you to quickly scan substations for leaks while maintaining a safe distance from high-voltage equipment. By catching leaks early, the GF306 reduces lost revenue to breakdowns and repairs.

Product

PXI Triple 2 x 2 Fibre Optic Mux LC

40-860-432

-

Pickering Interfaces Inc.

40-860-432 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

PXI Express High Speed Optical FPGA Board

HSS-8324

-

Conduant Corporation

HSS-8324 - Conduant Corporation

The Conduant HSS-8324 Optical FPGA board provides the user with a hardware platform that is able to sustain full-duplex high-bandwidth transfers through its 8-lane Gen3 PXI Express (PXIe) interface and its 24-lane optical interface. The PXIe interface provides a theoretical maximum throughput of 8GB/s (simultaneous in and out).

Product

Optical Power Meter

PM-102A

-

SYOPTEK INTERNATIONAL LIMITED

PM-102A - SYOPTEK INTERNATIONAL LIMITED

The PM Series Optical Power Meter are designed for use with an Optical Source for performing optical loss measurements on fiber optic cables. The PM-102 series are designed for affordable budgest, but meet the basic demands for real world testing. With a smaller size and weight, it’s easy to take these units into any enviroment.

Product

4.25Gbps Electrical & Optical Bit-Error-Rate Tester

OPB4250

-

Optellent, Inc.

OPB4250 - Optellent, Inc.

The OPTELLENT OptoBERT™ OPB4250 is a cost-effective easy-to-use bit-error-rate tester (BERT) for testing Fibre Channel (FC) devices, components, modules and systems in R&D and manufacturing environments as well as field installations of Storage Area Networks (SANs). OPB4250 supports 4GFC, 2GFC and 1GFC. The OPB4250 tester is also ideal for Gigabit Ethernet and Infiniband (2.5G) testing. It incorporates a pattern generator, clock recovery circuits, and a bit-error-ratio analyzer in one compact module that provides optical and electrical interfaces at up to 4.25Gb/s. An intuitive graphical user interface (GUI) enables easy point-and-click operation. The GUI displays error counts, BER, and related statistics.

Product

Digital I/O Board, 16 Optically Isolated I/O Channels, 24V

APCI-1516

-

TEAM SOLUTIONS, INC.

APCI-1516 - TEAM SOLUTIONS, INC.

PCI interface to the 32-bit data bus? 8 isolated input channels, 24 V? 8 isolated output channels, 10 to 36 V,output current 500 mA? Timer-programmable watchdog for the reset of the outputs to ??? One ground line for all inputs and one ground line for all outputs? Outputs set to "0" at PowerOn/Reset

Product

Rolling Seal 8 Optical Connector - APC (RS8 APC)

-

Teledyne Marine ODI

Teledyne Marine ODI

The Angled Physical Contact Rolling Seal 8 Connector (RS8 APC) from Teledyne ODI is a wet-mateable optical connector with angled endfaces. The design reduces signal interference due to reflections at the connector face, supporting the next generation of subsea optical communication equipment. The Rolling Seal design provides isolation from seawater and silt when the connectors are unmated. As the seals rotate, the fibers join inside a clean, oil-filled conduit, resulting in a reliable optical throughput. The RS8 APC incorporates RS8 Mark III design features to enhance operational efficiency and reduce risks during ROV intervention.

Product

PXI Single 2 Channel Fibre Optic MU

40-855-312

-

Pickering Interfaces Inc.

40-855-312 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.