Fieldbus
An all-digital, serial, two-way communications system that interconnects measurement and control instrumentation such as sensors, actuators and controllers.
See Also: Serial, I2C, LIN, Can bus, ExpressCard, FireWire, RS-232, RS-485, PCI Express, Serial ATA, Serial Peripheral Interface, SMBus, PROFIBUS
-
Product
Fieldbus ComTool
FBT-9
-
he Relcom Fieldbus ComTool (FBT-9) establishes communications among Foundation Fieldbus devices without a DCS allowing early checkout of wiring and devices.
-
Product
Fieldbus Gateway
EKI-1242IEIMS
-
Modbus RTU/TCP to 3-in-1 EtherNet/IP or PROFINET or OPC UA Protocol Gateway, Wide Temperature. Seamless integrate Modbus RTU/TCP and EtherNet/IP or PROFINET or OPC UA communication. Built-in real time diagnostic to increase high efficiency of device management.
-
Product
IDoor Module: 2-Port Hilscher NetX100 FieldBus MPCIe, EtherNet/IP, RJ45
PCM-26R2EI
Expansion Module
Meets Advantech Standard iDoor TechnologyPCI ExpressR Mini Card Specification Revision 1.2 compliantIdentical interface for all Hilscher Real-Time Ethernet Fieldbus ProtocolsVarious colorful front plates for protocol identificationEasy integration by wide range of device driversHigh extended temperature range up to 70°CCompatible with embedded automation PC UNO-1/2/3/4 series
-
Product
Industrial Fieldbus
-
Industrial fieldbus iDoor series modules support: CANopen, PROFIBUS, PROFINET, EtherCAT, and EtherNet/IP in automation applications.
-
Product
EtherCAT Gateways
-
EtherCAT Fieldbus gateways provide seamless communication between Modbus RTU/TCP and EtherCAT communication protocols.
-
Product
8AI EtherNet/IP Fieldbus Remote I/O
ADAM-6117EI
-
8ch analog input(voltage or current)Protocol : EtherNet/IP2 x RJ-45 LAN for Daisy-chain connectivity2500VDC isolation protection
-
Product
Modular Embedded Box PC With 11th Gen Intel® Core™ I CPU
UNO-2484G V2
-
Intel® Core™ 11th i7/i5/i3 Processor with 8GB DDR4 3200Mb/s memory4 x GbE, 3 x USB 3.2 Gen2, 1 x USB2.0, 1 x HDMI 1.4, 1 x DP 1.4a, 4 x RS232/422/485Optional 2nd stack supports up to 2 x iDoor extension for expending wireless connectivity, industrial fieldbus or more I/OCompact fanless designRuggedized by zero cable and lockable I/O designSupports NVME storage with high data-transmission efficiency
-
Product
Small-Size Modular Embedded Box PC With Intel® Celeron® J6412
UNO-2372G V2
-
Intel® Celeron® J6412 quad-core processor with 8GB DDR4 memoryCompact, robust, fanless and scalable system with high stabilityOptional second stack for supporting extension iDoor module, including wireless connectivity, industrial fieldbus and more I/O portsSupports NVME storage with high data-transmission efficiencySupports Windows 11 IoT Enterprise LTSC
-
Product
IDoor Module: 2-Port Hilscher NetX100 FieldBus MPCIe, PROFINET, RJ45
PCM-26R2PN
-
Meets Advantech Standard iDoor TechnologyPCI ExpressR Mini Card Specification Revision 1.2 compliantIdentical interface for all Hilscher Real-Time Ethernet Fieldbus ProtocolsVarious colorful front plates for protocol identificationEasy integration by wide range of device driversHigh extended temperature range up to 70°CCompatible with embedded automation PC UNO-1/2/3/4 series
-
Product
Control Panel
-
Control panels are high-performance industrial PCs, serving as PC-based automation control platforms supporting fieldbus and process visualization.
-
Product
Small-Size DIN-Rail IPC With Intel® Celeron® J1900
UNO-1372G-J
-
Intel® Celeron® J1900 2.0GHz processor with 4GB DDR3L MemoryRobust design for industrial control and harsh environmentIsolated protection of COM and digital Input/outputCompact fanless designWide power input range and operating temperatureChassis grounding protectionFlexibility of expanding functionality for various applicationSupport diverse industrial fieldbus, IO & peripheral iDoor modulesDedicated TPM2.0 microcontroller designed for hardware security
-
Product
Small-Size Modular Embedded Box PC With Intel® Processor N250 And Intel Atom® X7433RE Processor
UNO-2372V3
-
Intel® N250 (1.3GHz, formerly Twin Lake) and Intel Atom® x7433RE (1.5GHz, formerly Amston Lake) quad-core processorEquipped with one DDR5 memory slot (up to 16GB)Compact, robust, fanless and scalable system with high stabilityOptional second stack for supporting iDoor extension modules, including wireless connectivity, industrial fieldbus and additional I/O ports1 x M.2 B Key (3042/3052, PCIe x1, USB 3.2/2.0, SATA), 1 x M.2 E key (2230, PCIe x1, USB 2.0) for wireless modules1 x M.2 M key (2242 NVMe, PCIe x2) for storageSupports Windows 11 LTSC, Ubuntu 22.04
-
Product
Encoders
-
*Designs to proven industrial standard*Compact and robust housing*Hollow shaft encoder for direct mounting on actuators*Versions with integrated fieldbus interface*Cable entry for axial and radial use
-
Product
Process Control Actuators
SM-6000
-
*Torque range up to 35,256 Nm (26,000 lbf.ft)*Up to 313° rotation*Double O-ring sealing*Continuous unrestricted modulating duty*Manual override standard*HART®, Profibus® & Foundation Fieldbus® available*Automatic torque limiting*Self-locking drive system to hold in last position and prevent backdriving up to 125% of torque rating*AC input power (1-phase and 3-phase)*Temperature range from -40° F to 185° F (-40° C to 85° C)*Manual override standard
-
Product
Electromagnetic Flowmeter for conductive liquids
Picomag
-
Reliable measurement and monitoring of industrial water, cooling water or warm water. Simultaneous measurement of flow and temperature. Flexible integration into all fieldbus systems via IO-Link. Commissioning and operation via Bluetooth® and SmartBlue App. Minimum conductivity ≥20 μS/cm. Fluid temperature –10 to +70 °C (+14 to +158 °F).
-
Product
Stationary Industrial Scanners
-
Stationary industrial scanning solutions are specifically designed for applications that are not permanently monitored by operators and are used in a wide variety of industries. Stationary position scanners offer various options for how output data can be used and interface with your business PCs, servers, or ERP, in virtually any fieldbus protocol, providing real value on how your organization uses this business intelligence data. With Datalogic’s versatile portfolio of stationary industrial scanners, customers can get a solution for a full array of barcode reading needs.
-
Product
Process Control Instruments
-
burster präzisionsmeßtechnik gmbh
Measuring accuracy of up to 0.05 %, sampling rate 10 kHz maximal, innovative evaluation elements, i.e. windows, thresholds, trapeziums, envelope curves, freely definable mathematical operations, two synchronous processes can be monitored, 128 measuring programms, intelligent Signal sampling, programmable I/O functions, Ethernet, USB, RS232, extensive diagnostics and statistical analysis, all usual sensor interfaces, variable fieldbus interfaces, powerful PC Software
-
Product
Field Communicators
-
We offer modular multi-bus field communicators for HART, FOUNDATION Fieldbus H1 and Profibus PA protocols, combined in some of our process calibrators. While the communicator is built in the same device with the process calibrator, they can communicate seamlessly offering better user experience than separate calibrator and communicator. Plus you only need to carry one device. Thanks to the modularity you can select which protocol you take, and update more protocols later on, if needed.
-
Product
EtherNet/IP Gateways
-
The EtherNet/IP Fieldbus gateways provide seamless communication between Modbus RTU/TCP and EtherNet/IP communication protocols.
-
Product
IDoor Module: 1-Port Hilscher NetX100 FieldBus MPCIe, PROFIBUS, DB9
PCM-26D1DB
-
Meets Advantech Standard iDoor TechnologyPCI ExpressR Mini Card Specification Revision 1.2 compliantSupports Hilscher PROFIBUS Protocol LibraryEasy integration by wide range of device driversHigh extended temperature range up to 70°CCompatible with embedded automation PC UNO-1/2/3/4 series
-
Product
Palm-Size Industrial Automation PC With Intel® Celeron® J1900
UNO-2272G
-
Intel® Atom™ N2800/J1900 Processors with 2GB DDR3/DDR3L Memory1 x GbE, 3 x USB 2.0/3.0, 1 x COM, 1 x HDMI, AudioCompact with Fanless DesignRubber Stopper Design with Captive ScrewDiverse system I/O and Isolated Digital I/O by iDoor TechnologySupports Fieldbus Protocol by iDoor TechnologySupports MRAM by iDoor Technology
-
Product
USB-8486, USB, 1-Port, Fieldbus Interface Device
781160-01
Interface Module
The USB‑8486 is a FOUNDATION fieldbus device for developing applications with the NI‑FBUS driver, NI‑FBUS Configurator, and NI‑FBUS Monitor. FOUNDATION fieldbus is a popular industrial communication standard for process control applications. The NI‑FBUS Configurator features user-friendly multi-window interfaces to provide tools for the complete configuration, programming, and execution schedules of FOUNDATION fieldbus segments. The NI‑FBUS Monitor is a stand-alone application used to monitor, debug, and analyze fieldbus data packets.
-
Product
Connection Units
-
Leuze electronic GmbH + Co. KG
All peripheral devices – such as sensors, safety switches and cameras – require a connection to the fieldbus or a control unit. Depending on device type and area of application, our modular connection units offer variable interfaces that enable simple connection of the devices directly to the fieldbus and thus ensure simple integration of new devices in the system.
-
Product
Fieldbus Components
-
The range of fieldbus components offered by ifm includes gateways, IO-Link masters, RFID evaluation units and encoders. Gateways establish the connection between AS-i and common fieldbus systems such as EtherNet/IP, Profibus, Profinet or EtherCAT. They control the data exchange to the sensor/actuator level and communicate rapidly with the superior control level. Variants with PLC functionality or fail-safe PLC are available.
-
Product
DDLS 200 with 2 Mbit/s Transmission Rate
-
Leuze electronic GmbH + Co. KG
Optical data transmission for RS interfaces and fieldbuses up to 300 m and up to 2 Mbit/s. Infrared data transmission protects the DDLS 200 from interference. Systems are available for all common industrial fieldbus interfaces. The ranges are stepped and reach a maximum transmission distance of 300 m. Low ambient light sensitivity through special FSK method. Available interfaces: PROFIBUS, Interbus and CAN/DeviceNet, as well as RS422 and RS 485.
-
Product
Multifunction Field Calibrator & Communicator
MC6-Ex
-
The MC6-Ex is an intrinsically safe field calibrator and communicator. It is ATEX and IECEx certified and can be used in all hazardous zones / divisions. The MC6-Ex includes a field communicator for HART, FOUNDATION Fieldbus and Profibus protocols. Each calibrator is delivered with a traceable, accredited calibration certificate as a standard. t is a documenting, multifunction calibrator and communicator that offers calibration capabilities for pressure, temperature and various electrical signals.
-
Product
Digital Fiber Sensor
FX-550L
-
Panasonic Industrial Devices Sales Company of America
Panasonic IO-Link technology makes it possible to continuously collect and process data and to control the sensor. This allows users to implement predictive maintenance and to monitor operation in machines and assembly lines. Processing the multitude of data requires users to invest in know-how and time. Panasonic has developed a self-diagnosis function for each sensor type. This function sends sensor data via IO-Link to a higher-level fieldbus, thus informing about the state of the sensor directly. This way, the amount of production data and the work needed to analyze the data is reduced.
-
Product
Expandable Embedded Box IPC With Intel® Celeron® J1900
UNO-3272G
-
Intel® Celeron® J1900 2.0GHz processor with 4GB DDR3L memory3 x USB2.0, 1 x USB3.0, 2 x RS232/422/485, 2 x RS2322 x 10/100/1000BASE-T EthernetVGA, HDMI support 2 x independent displaysOptional Digital I/O support for sensing and controllingDedicated TPM2.0 microcontroller designed for hardware securityFlexible system I/O expansion by iDOOR technologySupport diverse fieldbus protocol by iDOOR technologyDual Power input for power redundancy
-
Product
Connectivity
-
Complete range of connection boxes, controllers and accessories for reader network building and flexible connection to all industrial fieldbus
-
Product
CMOS Type Micro Laser Distance Sensor
HG-C1000L
-
Panasonic Industrial Devices Sales Company of America
The IO-Link technology makes it possible to continuously collect and process data and to control the HG-C1000L. This allows users to implement predictive maintenance and to monitor the operation in machines and assembly lines. Processing the multitude of data requires users to invest know-how and time. To reduce the workload for the customers, Panasonic has developed a self-diagnosis function specifically for this sensor. This function sends sensor data via IO-Link to a higher-level fieldbus, thus informing about the state of the sensor directly. This way, the amount of production data and the work needed to analyze the data is reduced.
