Product

PXI Single 8 Channel Optic Mux LC

40-852-418

-

Pickering Interfaces Inc.

40-852-418 - Pickering Interfaces Inc.

The 40-852-418 8-channel multiplexer is part of Pickering's range of PXI Fiber Optic MEMS Switching modules. They are available in many high density formats with a choice of different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

High Stable Four Wavelength Optical Laser Source

-

Shanghai Baudcom Communication Device Co.,Ltd.

Shanghai Baudcom Communication Device Co.,Ltd.

The 2Q Series Optical Laser Source is an advanced version of Optical Laser Sources, with more calibrated wavelengths.

Product

Optical Transmitter

ST1310-XX

-

Hangzhou Softel Optic Co., Ltd.

ST1310-XX - Hangzhou Softel Optic Co., Ltd.

ST1310-XX Optical Transmitter adopts high linearity ORTOL DFB laser, build-in perfect pre-distortion adjustment circuit and laser APC,ATC closed loop control circuit. All the operating parameters are controlled by micro-processor, The LCD screen on the front panel can display relative operating status and the fault information.

Product

Optical Tool Kit

TC-405

-

Techwin(China) Industry Co., Ltd

TC-405 - Techwin(China) Industry Co., Ltd

Optical Tool Kit

Product

Optical 12,000 Meter Connector

-

Teledyne Marine Impulse-PDM

Teledyne Marine Impulse-PDM

​Teledyne Impulse-PDM’s 5135/5175 optical connectors utilize proven standard ferrule technology and are available for multi-mode or single-mode operation.The connectors are manufactured in Titanium Ti 6Al-4V, which is electro-polished to remove surface contamination, thus improving resistance to corrosion. The engaging nuts are also manufactured in the same grade of Titanium and the threads are coated with a Nickel/PTFE composite coating to prevent galling. The connectors have been qualifi ed to 12,000 meter operating depth.

Product

Optical tables

-

Inframet

Inframet

The primary goal of a well designed optical table is to eliminate relative motion between components of test system located on the surface of the optical table because such motion can generate measurement errors.

Product

5Gbps Electrical & Optical Bit-Error-Rate Tester

OPB5000

-

Optellent, Inc.

OPB5000 - Optellent, Inc.

The OPTELLENT OptoBERT™ OPB5000 is a cost-effective easy-to-use bit-error-rate tester (BERT) for testing datacom ICs, devices, components, modules and systems in R&D and manufacturing environments as well as field installations of Storage Area Networks (SANs). OPB5000 supports 4GFC, 2GFC and 1GFC. The OPB5000 tester is also ideal for Gigabit Ethernet, Infiniband (2.5G) and PCIe testing.

Product

Multi Mode Fiber Optic Rotary Joints

-

Everaxis

Everaxis

Multi Mode Fiber Optic Rotary Joints (FORJ) can be supplied as a stand alone product with customized features (wavelength, connectors, fiber).

Product

Optical Power Meter

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

Optical Power Meter (OPM) is an essential fiber test instrument used for absolute optical signal measurement as well as fiber optic loss related measurement. The term usually refers to a device for testing average power in fiber optic systems. Fiber optical power meter is a tool for telecom and CATV network. This handheld optical power meter features ingenious appearance, wide range of power measurement, high accurate test precision and user automatic self-calibration function.

Product

Multi-Interface TDM, Optical, And Packet/IP Rackmount & Probe Test Platforms

mTOP™

-

GL Communications Inc.

mTOP™ - GL Communications Inc.

Most equipment manufacturers and large enterprises prefer rack-based test tools as they are compact and higher density form factor solution for testing, monitoring, and troubleshooting network conditions. GL’s Multiple TDM Optical and Packet (mTOP™) rack enclosure can house any combination of USB based test equipment which are easily deployed and securely fixed to an equipment rack to provide extraordinary scalability to test switches, routers and end-to-end networks. These rack based platforms incorporates the basic test unit along with the necessary PC hardware, Windows® 10 64-bit operating system and remote accessibility via scripting and remote desktop. There are no moving parts with the unit, so reliability and longevity are integral. GL’s latest mTOP™ Probe stand-alone hardware variant is an all-in-one self-contained test instrument. The mTOP™ Probe can include any of the multiple TDM Optical and Packet interfaces USB device combined with the PC into one single box. The comprehensive mTOP™ Probe hardware unit is designed for easier portability and convenient for field testing which incorporates the testing features for multiple interfaces along with necessary PC hardware in a single box. GL’s USB based test equipment - PacketExpert™ (Ethernet), tProbe™ (T1/E1), USB T3/E3 (TDM), Dual UTAs (Analog/Wireless), and LightSpeed1000™ (SONET SDH) to support multiple interfaces in a compact rack space or included in a portable Probe unit.

Product

Single Mode Fiber Optic Rotary Joints

-

Everaxis

Everaxis

Single Mode Fiber Optic Rotary Joints (FORJ) can be supplied as a stand alone product. Its features can be customized : wavelength, connectors, characteristics of the fiber…

Product

Fourier Transform Optical Spectrum Analyzer, 600 - 1700 nm

OSA202C

-

Thorlabs, Inc.

OSA202C - Thorlabs, Inc.

Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines. Many commonly available OSAs use grating-based monochromators, which have slow acquisition times due to the need to mechanically scan the grating and average out noise at each wavelength. Thorlabs' OSAs acquire the spectrum via a Fourier transform using a scanning Michelson interferometer in a push/pull configuration. This approach dramatically improves the acquisition time, enables a high-precision wavelength meter mode with 7 significant figures and ±1 part-per-million accuracy, and allows the included software to provide robust statistical analysis of the acquired spectra, as explained in the Design tab.

Product

CWDM Optical Light Source

JW3122

-

Shanghai Joinwit Optoelectronic Tech,co.,Ltd

JW3122 - Shanghai Joinwit Optoelectronic Tech,co.,Ltd

Determine which CWDM channels can be used for communications, plot your fiber's entire span loss spectrum, measure fiber span loss at water peak.

Product

Customized Electrical Test Optical Inspection

-

Landrex Technologies Co., Ltd.

Landrex Technologies Co., Ltd.

Customized Electrical Test Optical Inspection

Product

Multi Channel Optical Fibre Verification

-

LXinstruments GmbH

LXinstruments GmbH

The multi-channel optical fibre test system is used in the development and qualification of single mode optical fibres. The fibres are exposed to environmental influences in a climatic chamber in order to analyse the data on insertion loss and reflection. In addition, the current temperature in the climatic chamber is documented. Insertion loss measurement is performed with the help of an optical power meter, laser sources and optical switches. An Optical Time Domain Reflectometer (OTDR) from Exfo is used for the reflection measurements. The system was designed for the simultaneous characterization of 15 sample fibres and one reference fibre.

Product

Precision Optical Power Meter

FPM200 Series

-

Shanghai Tarluz Telecom Tech Co., LTD

FPM200 Series - Shanghai Tarluz Telecom Tech Co., LTD

FPM200 Series handheld Optical Power Meter, It could measure insertion loss for single mode or multimode fiber cables with FLS series optical light source precisely. The Optical Power Meter features with good appearance, wide power measurement range, high accuracy, with user self-calibration function and reference power level storage. It is ideally to measure optical power in fiber optic network applications.

Product

Satellite Optical Transmitter

SST-15CW

-

Hangzhou Softel Optic Co., Ltd.

SST-15CW - Hangzhou Softel Optic Co., Ltd.

* Designed for satellite optical system*Wide operating frequency range: 47-2150MHz*Excellent linearity and flatness*Using 1-core single-mode fiber, high return loss*Build-in CWDM, using DFB coaxial small package laser*Output 13/18V, 0/22KHz to LNB working*ALNB mode switch offers the possibility to use either Quattro or QUAD LNB*A distribution of up to 16 optical nodes is possible*Red-LED for power indication*Smaller size and easier installation

Product

Optics Test Systems

MTF Measuring Device For Endoscopes

-

Optik Elektronik Gerätetechnik GmbH

MTF Measuring Device For Endoscopes - Optik Elektronik Gerätetechnik GmbH

Manual MTF measuring device for endoscopes. The measurement setup is based on modular individual components that can be arranged on a breadboard according to the type of endoscope (angle between light entrance and eyepiece).

Product

PCIe Fast Multifunction, Multichannel Counter Board, Optically Isolated, RS-422 Inputs

APCIE-1711-5V-I

-

TEAM SOLUTIONS, INC.

APCIE-1711-5V-I - TEAM SOLUTIONS, INC.

The APCIe-1711 board is a fast multifunction and multichannel counter board for the PCI Express bus. The strengths of this board are its wide range of applications and high precision and reliability for industrial applications. With this board you can realise many different applications on the same hardware base. The board is supplied with a pool of functions which provide the user with maximum efficiency yet minimum space and parts requirement. The functions are individually configured for each channel through the supplied software. The flexible programming facilities on this board allow many differentuser applications to be quickly and easily developed and reconfigured as further requirements arise. Thanks to the FPGA board structure, further counting applications canbe realised through software adaptation.

Product

PXI Dual 2 x 2 Fibre Optic Mux SC/PC

40-860-222

-

Pickering Interfaces Inc.

40-860-222 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.