IEEE 1149.1
Boundary Scan standard enables functional chip & board circuit test.
See Also: Boundary Scan, Boundary Scan Software, JTAG Debuggers
-
Product
Low Speed Protocol Decode/Trigger Software (I2C, SPI, RS232, I2S, JTAG)
D9010LSSP
-
This bundle includes powerful decoding and triggering for the following serial bus standards: I²C, SPI, Quad SPI, eSPI (including Quad eSPI), RS232/UART, Manchester, I²S, SVID, and JTAG (IEEE 1149.1). It is compatible with S-Series, V-Series, Z-Series, EXR-Series, MXR-Series, UXR-Series, 9000 Series, and 90000 Series Infiniium oscilloscopes. For detailed information on the decode and trigger settings, please refer to the datasheet.
-
Product
Manufacturing Test Station
Scan Executive
-
The Scan ExecutiveTM Manufacturing Test Station is used to apply the same IEEE 1149.1 tests that were developed and used in the lab in a high-volume manufacturing environment without requiring additional development.
-
Product
128 DIOs JTAG Boundary Scan Resources Unit
YAV9JTAG
Test Fixture
Boundary-scan is a widely practiced test methodology that is reducing costs, speeding development, and improving product quality for electronics manufacturers around the world. By relying on an industry standard, IEEE 1149.1, it is relatively quick, easy, and inexpensive to deploy a highly effective test procedure. In addition, today’s PCBs have little alternative because of limited access to board-level circuitry.
-
Product
Embedded Configuration And Test Processor
SystemBIST
-
The SystemBISTTM Embedded Configuration and Test Processor - is a complete plug-and-play IP module built upon a unique patent-pending architecture. The SystemBIST processor is embedded onto a PCB, which enables design engineers to build high quality, self-testable and in-the-field re-configurable products. SystemBIST is vendor independent and can configure any IEEE 1532 or IEEE 1149.1 compliant FPGA and CPLD in-system.
-
Product
CoreCommander
-
While many ICs are equipped with a JTAG (IEEE Std. 1149.1) boundary-scan register (BSR), a significant number of microprocessors and DSPs can be found with deficient or even non-existent BSRs. CoreCommander Micro uses the on-chip debug mode of processors to access ports and embedded peripheral controllers to promote ''kernel-centric'' testing. Similarly, in the case of today's Field Programmable Gate Arrays (FPGAs) test engineers can ''bridge'' from the JTAG interface to the resources of the gate array itself. Our CoreCommander FPGA product implements a translatorinterface that allows our JTAG hardware to control embedded IP cores via a variety of bus interfaces (e.g. Wishbone Avalon etc.).
-
Product
Boundary Scan
TurboBSD
-
TurboBSD is SynTest high-performance Boundary Scan Designer. It is 100% compliant to the IEEE 1149.1 Boundary Scan Standard. TurboBSD performs Boundary Scan logic synthesis, creates BSDL (Boundary Scan Description Language) file, and generates Boundary Scan test patterns
-
Product
JTAG Boundary-Scan I/O Modules
SCANIO Family
-
The Corelis family of SCANIO™ modules turn any IEEE standard 1149.1 boundary-scan controller into a powerful digital boundary-scan tester. The SCANIO family of products use boundary-scan gate arrays to add control and visibility to connectors, traces, and logic that can not be tested using traditional boundary-scan techniques.The SCANIO products, when combined with a boundary-scan controller, operate as a traditional “bed-of-nails” tester except access to the stimulus and response I/O’s is achieved via boundary-scan.
-
Product
IEEE 802.3 CK Tx License Suite
SW00IECK
-
The IEEE 802.3 CK Tx License Suite is part of the subscription based Oscilloscope Compliance Test Software Suites. This suite covers Tx Validation license for IEEE 802.3 CK (100/200/400 Gb/s). Together with the subscription model, this enables the support and coverage continuity as the IEEE 802.3 CK technology specification progresses through revisions.
-
Product
IEEE Test Charts (Video /Cine)
-
IEEE Test Charts (Video /Cine) by Applied Image - IEEE Video Resolution Chart, Picture Height Test Chart, Microsoft WebCam Image Quality Test, OTTO-2 Otto Nemenz Cine Lens Calibration Reticle
-
Product
1149.1 Boundary Scan Feature, GTE 10.00p
K8212A
-
Boundary scan is a method for testing interconnections on printed circuit boards. Keysight’s Interconnect Plus Boundary Scan feature enables all the tools required to develop and execute this foundational test method on the board under test.
-
Product
IEEE 802.11 Ac + BT 5.0 (PCIe - UART)
AIW-154
-
IEEE 802.11ac + BT 5.02 TX / 2RXWide operating temperature -30 ~ 85 °C (- 22 ~ 185 °F)Supports Linux OSM.2 2230 form factor module (L x W x H) 30 x 22 x 2.85 mm/ 1.18 x .86 x .11 inWi-Fi: PCIe / BT: UART
-
Product
IEEE 802.11ax (2.4GHz + 5GHz) + Bluetooth 5.3, M.2 2830, PCIe-UART
AIW-165
-
NXP 88W90982Tx/2RxIEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz) + BT 5.3Form factor: M.2 2830 E keyWi-Fi: PCIe; Bluetooth: UARTOS: LinuxOperating Temp: -40 ~ 85 °C (-40 ~ 185 °F)28 x 30 x 3.95 mm (1.10 x 1.18 x 0.15 in)IC: NXP 88W9098
-
Product
Electrical Receiver Conformance Test Application for IEEE 802.3bs/ cd
M8091BSCA
-
IEEE 802.3bs receiver test application for 200GAUI-4 and 400GAUI-8, covering chip-to-module, chip-to-chip, backplane, and copper cable interconnects.
-
Product
IDoor Module: Intel I225, 2.5Gb/s, IEEE 1588, TSN, RJ45 X 1
PCM-24R1TP
-
Meets Advantech iDoor technology standardSupports Time Sensitive Network (TSN) (IEEE 1588/ 802.1AS Rev, 802.1Qav, 802.1Qbv)Support PXEHigh speed Ethernet supports 10BASE-Te, 100BASE-TX, 1000BASE-T and 2500BASE-T 802.3Achieves time synchronization for device or systemReal-time Ethernet with hardware based precision time protocol
-
Product
GPIB-USB-HS+ , USB, Analyzer Software Included, IEEE 488 GPIB Instrument Control Device
783368-01
GPIB Controller
USB, Analyzer Software Included, IEEE 488 GPIB Instrument Control Device - The GPIB‑USB‑HS+ is an IEEE 488 controller and portable analyzer device for computers with USB slots. You can use this device to integrate an instrument into your system using GPIB as well as to troubleshoot and solve GPIB hardware and software problems. The GPIB‑USB‑HS+ achieves maximum IEEE 488.2 performance. With no GPIB cable required for instrument connection, you can use the Hi‑Speed USB port to control up to 14 programmable GPIB instruments. The improved design allows for size compatibility with almost every instrument, adds analyzer functionality, and reduces the overhead to generate faster turnaround times in your application. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.
-
Product
IDoor Module: 2-Port Gigabit Ethernet, IEEE 802.3af (PoE) Compliant, MPCIe, RJ45
PCM-24R2PE
-
Meets Advantech Standard iDoor TechnologyPCI Express® Mini Card Specification Revision 1.2 compliantSupports 2 Gigabit Ethernet MAC Controller and PHY portsSupports 24 VDC input power boost up to 15.4 W at 48 VDC per PoE portSupports PoE (Power over Ethernet), IEEE 802.3af compliantPowered Device (PD) auto detection and classificationSupports IEEE 802.3u Auto-NegotiationSupports 32/64-bit Windows 7/8, Linux 2.4/2.6Supports Embedded Automation PC UNO-2400 seriesSupports Control DIN-Rail PC UNO-1300/1400 seriesSupports Control Cabinet PC UNO-3200/3300/3400 series
-
Product
PoE IEEE 802.3af/at 15.4W/30W Power Sourcing Equipment (PSE) For MIO SBC
MIOe-PSE
-
PSE delivers 15.4 W/30 W power to PDDual / Single port supportCompliant with IEEE 802.3 af/at standardSupports wide temperature -40 ~ 85 °CSupport Model: MIO-5354, MIO-2364, MIO-5376, AFE-E350, AFE-E420
-
Product
New Generation Analyzer For IEEE C37.94
NetProbe 2000 C37.94
-
The NetProbe 2000 C37.94 is a field analyzer with IEEE C.37-94 Multimode optical fiber interface for testing bit error preformance between teleprotection and digitalMultiplexer equipment. Can be combined with many optional interfaces for T1,E1, WiFi, VoIP and V-series testing.
-
Product
Receiver Conformance Test Application for IEEE 802.3bm
M8091BMCA
-
IEEE 802.3bm Receiver Test Application for 25GAUI-1 Chip-to-Module, Chip-to-Chip, Cable and Backplane.
-
Product
IEEE 488 PXI GPIB Instrument Control Module
778039-01
Serial Interface
The PXI‑GPIB is an IEEE 488 controller module for PXI systems. You can use this module to integrate non-PXI instruments into your PXI system using GPIB. The PXI‑GPIB achieves maximum IEEE 488.2 transfer rates. This module … includes a license for the NI‑488.2 driver software, which provides maximum reliability for connecting to third-party instruments with GPIB.
-
Product
IEEE 802.11ax (2.4GHz + 5GHz) + Bluetooth 5.3, LGA Type
AIW-164
-
NXP 88W9098IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz) + BT 5.3Wi-Fi: PCIe/SDIO ; Bluetooth: UARTOS: LinuxOperating Temp: -40 ~ 85 °C (-40 ~ 185 °F)form factor: LGA type
-
Product
1149.1 Boundary Scan Feature, GTE 10.00p
K8212B
-
Boundary scan is a method for testing interconnections on printed circuit boards. Keysight’s Interconnect Plus Boundary Scan feature enables all the tools required to develop and execute this foundational test method on the board under test.
-
Product
Software for the Development and Implementation of Test Programs using IEEE 1641
newWaveX Suite
-
We Have a unique suite of tools to support the development and implementation of test programs created using IEEE 1641 to define the signals and tests. These include the entry-level version of newWaveX (newWaveX–Lite), the development versions of newWaveX (newWaveX–SD and newWaveX–PD) and the complete integrated development environment for IEEE 1641, SigBase. These tools provide everything necessary to work with IEEE 1641, from creating simple signals through to implementing and managing a complete 1641 test environment. All of our 1641 tools are commercial off-the-shelf (COTS) items that may be used stand-alone or integrated into a complete test development environment. newWaveX products may be integrated with third party test executives and associated software.newWaveX is an intuitive user-friendly suite of products that does not require specialist training for users to acquire the skills to develop 1641 programs. Completing the IEEE 1641 User/Developer training course (which uses newWaveX Signal Development for the hands-on element), together with the associated 1 day newWaveX–SD User/Developer training course, provides complete information for the newWaveX user. Further support is provided for users of newWaveX packages under the maintenance agreements for those products.
-
Product
PCI Express, Analyzer Software Included, IEEE 488 GPIB Instrument Control Device for Windows - Onboard GBIP Analyzer
780935-01
Signal Analyzer
The PCIe‑GPIB+ combines an IEEE 488 controller and an analyzer on one device for computers with PCIe slots. You can use this device to integrate an instrument into your system using GPIB as well as to troubleshoot and solve GPIB hardware and software problems. The PCIe‑GPIB+ achieves maximum IEEE 488.2 transfer rates. With an onboard bus master DMA controller, there is no microprocessor interruption in data transfers. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.
-
Product
1-Port Gigabit Ethernet, Intel® I225, 2.5Gb/s, IEEE 1588, TSN, 1x RJ45, B+M Key (3042, PCIex1)
PCM-34R1TP
-
Meets Advantech iDoor technology standardSingle 2.5GbE LAN Port (RJ45)M.2 3042 B+M Key compliant (PCI Express)PCIe Gen2 x1 bandwidth specificationSupports Time Sensitive Network (TSN) (IEEE 1588) and PXECompatible with embedded automation PC UNO-1/2/3/4 seriesCompliant with FCC/CE Class A CertificationOperation temperature 0~60 degree support
-
Product
IEC 61850-3/ IEEE 1613
-
IEC 61850 substation controllers and IEEE 1613 controllers are suitable for substation automation, T&D automation, and grid integration markets.
-
Product
IEEE 802.11ax/ac/a/b/g/n +Bluetooth 5.2 M.2 2230 (A-E Key) Card
PPC-WLAN-D
-
IEEE 802.11ax/a/b/g/n + Bluetooth 5.2Supports 2.4 GHz: 2.412 ~ 2.484 GHz , 5 GHz: 4.915 ~5.925GHzMU-MIMO, 2Tx/2RxOperating temperature: 0 ~ 70 °C (32 ~ 158 °F)With M.2 (E Key) to Mini PCIe Adapter (for PPC-WLAN-D1)With 2.4/5G Hz dipole Antenna and 425 mm Coaxial Cable
-
Product
GPIB-USB-HS, USB, IEEE 488 GPIB Instrument Control Device
778927-01
GPIB Controller
USB, IEEE 488 GPIB Instrument Control Device - The GPIB‑USB‑HS is an IEEE 488 controller device for computers with USB slots. The GPIB‑USB‑HS achieves maximum IEEE 488.2 performance. With no GPIB cable required for instrument connection, you can use the Hi‑Speed USB port to control up to 14 programmable GPIB instruments. This device is completely IEEE 488.2 compatible. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.
-
Product
PCI-8232, IEEE 488 GPIB Instrument Control Device for Windows
778742-01
Interface
The PCI-8232 is a plug‑and‑play IEEE 488 interface for PCs and workstations with PCI expansion slots. The PCI-8232 can sustain data transfer rates up to 7.8 MB/s using HS488 and is IEEE 488.2 compatible. The PCI-8232 includes a license … for the NI-488.2 driver software, which provides high performance and maximum reliability for connecting to third-party instruments using GPIB.
-
Product
PCI Express, Analyzer Software Included, IEEE 488 GPIB Instrument Control Device for Windows - Low Profile, Onboard GBIP Analyzer
780936-01
Signal Analyzer
The PCIe‑GPIB+ combines an IEEE 488 controller and an analyzer on one device for computers with PCIe slots. You can use this device to integrate an instrument into your system using GPIB as well as to troubleshoot and solve GPIB hardware and software problems. The PCIe‑GPIB+ achieves maximum IEEE 488.2 transfer rates. With an onboard bus master DMA controller, there is no microprocessor interruption in data transfers. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.
