Teledyne Gas & Flame Detection
Teledyne Gas and Flame Detection uses its global capability, manufacturing excellence, and custom engineering to provide end-to-end gas and flame detection solutions for a wide range of hazards worldwide. With an industry-leading, comprehensive portfolio of products and services, our commitment to cross-platform integration provides protection for today and confidence for tomorrow.
- +(1) 713-559-9200
,
United States of America
-
Product
Gas & Flame Detection System
Syntel
-
Teledyne Gas & Flame Detection
Syntel is an addressable loop system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. It includes a standard OPC interface and can also be supplied by Modbus allowing easy integration with third party systems.Syntel stores alarm and calibration information in distributed non-volatile memory, hence there is no reliance on a centralized system.Syntel is ideal for installations where there is the possibility for future expansion. The system architecture allows very low cost expansion as cable runs to a central location are not needed.
-
Product
Multichannel Gas Alarm & Control System
X40
-
Teledyne Gas & Flame Detection
Your product description goes here.
-
Product
Fixed Gas Detectors
700 Series
-
Teledyne Gas & Flame Detection
The sensor electronics are completely protected and immune to water ingress and corrosion. The sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric LED display. The 700 Series intelligent sensor modules feature dual redundant outputs, a linear 4-20 milliamp analog signal and a Modbus RS-485 serial output.
-
Product
Fixed Digital Gas Detector
OLCT 10N
-
Teledyne Gas & Flame Detection
The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response.All transmitter information is received by the controller in less than 1 second.Non-intrusive operator interface requires only a simple magnetic wand and allows one man calibration without opening the enclosure.
-
Product
Gas Detection Controller
MX 43
-
Teledyne Gas & Flame Detection
Fully scalable, and designed to functional safety performance level 1 standards, the MX 43 is an analog and digital controller that continuously measures and controls gases in the atmosphere. The MX 43 gas detector manages both digital lines and analog channels, and covers all needs for a wide variety of gas monitoring applications. The MX 43 digital technology allows up to 32 detectors to be distributed on 8 lines for increased cost savings.
-
Product
Audio Visual Alarm Station
AV1-C1D2E
-
Teledyne Gas & Flame Detection
The AV1-C1D2E audio-visual alarm station is designed for installation and use in heavy industrial environments. The alarm station consists of a beacon and alarm horn. The warning light comes in field interchangeable dome colors of amber, blue, clear, green, red, yellow and magenta.The hazardous location combination AV1-C1D2E alarm horn sounder & beacon/status warning light is UL/cULs/ULC approved for Class I Div 2, Class II Div 2, Class I Zone 2/22 as well as IECEx and ATEX certified for Zone 2 and 22 applications.The 24 VDC version is UL and cUL approved to UL464 & UL1638 for private mode fire alarm use.
-
Product
Wireless Controller
Site Sentinel
-
Teledyne Gas & Flame Detection
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 devices and consist of any combination of wireless and/or wired sensors, one or more HMI panels and optional solar panels. Additional sensors and/or remote alarm stations on tripods can be added as needed to assure widespread alert to site personnel.
-
Product
Control Unit
MX 256
-
Teledyne Gas & Flame Detection
The MX 256 is a digital control unit intended for the detection and measurement of gases present in the atmosphere and more generally for the processing of any digital signal from digital sensors (OLCT 10N types), relay module, analog output module, logic input module. Thanks to its new option, an industrial controller module or remote HMI, it is possible to add analog input modules for sensor-transmitter connection (4-20 mA) and / or relay modules, this allows to not only extend the capacities but also to have event recordings (Location, Alarms,.....) and to have access to the data via the embedded web page.
-
Product
Personal Safety Gas Monitors
-
Teledyne Gas & Flame Detection
Want to protect your staff with high-end portable gas detectors? Discover Teledyne Gas and Flame Detection gas detection solutions.
-
Product
Fixed Gas Detectors
DG7 Series
-
Teledyne Gas & Flame Detection
All DGi-TT7 are constructed from a common housing and electronics with the detection properties being determined by the type of sensor (cartridge) used. A wide range of cells are available, these cells are intrisically safe protected, and may be replaced with the detector powered which minimises the system down time. The intelligent, microprocessor driven unit is fully configurable using a wireless hand-held terminal (TLU) or by using the hard wired HART option giving true flexibility to the installer and reduced service costs.Elements such as relay operation and alarm levels are all set via the TLU, a hazardous area approved hand-held unit. The unit may be interfaced directly with a wide range of panels, controllers and PLC’s etc. Its integral daylight readable alphanumeric display indicates local status and alarm level.
-
Product
Portable Gas Measurement Devices
-
Teledyne Gas & Flame Detection
Looking for portable gas leak detectors to protect your staff? Teledyne Gas and Flame Detection measuring devices meet all your requirements.
Parent
-
Teledyne Technologies Incorporated
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Siblings
-
Teledyne FLIR
A world leader in the design, manufacturing, and marketing of thermal imaging and stabilized camera systems for a wide variety of thermography and imaging applications including condition monitoring, research and development, manufacturing process control, airborne observation and broadcast, search and rescue, drug interdiction, surveillance and reconnaissance, navigation safety, border and maritime patrol, environmental monitoring and land-based security.
Siblings
-
Teledyne Advanced Pollution Instrumentation
Teledyne API (TAPI) designs and builds precision air quality and industrial gas monitoring instrumentation at our factory located in San Diego, California, USA. Our products are used worldwide in ambient air quality monitoring systems (AQMS), continuous emissions monitoring systems (CEMS), and industrial process applications.
Siblings
-
Teledyne Marine Benthos
Teledyne Benthos designs and manufactures rugged and reliable oceanographic instrumentation and sensor solutions for marine environments. Teledyne Benthos product lines include: acoustic communications, acoustic recovery and acoustic positioning technology.
Siblings
-
Teledyne DALSA
DALSA Corporation is an international high performance semiconductor and electronics company that designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing specialized wafer foundry services.
Siblings
-
Teledyne e2v
Teledyne e2v is a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace, defence, and industrial applications.
Siblings
-
Teledyne ICM
At ICM, we have more than 20 years of expertise that has been fully dedicated to the development, manufacturing and marketing of highly innovative portable X-Ray solutions. Nowadays, this know-how is used throughout the world in a wide range of applications and products. This includes its use for Non Destructive Testing applications, such as of welding inspections, as well as for such security functions as the scanning of suspect objects. We are proud to say that ICM’s products always deliver accurate, clear and reliable results.
Siblings
-
Teledyne LeCroy quantumdata
Leading provider of innovative solutions for testing emerging video technologies.
Siblings
-
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Siblings
-
Teledyne RF & Microwave
Teledyne RF & Microwave Solutions (RF&M) has over 50 years of experience in the design, development, and manufacture of sophisticated microwave/RF components and integrated assemblies for the most demanding challenges. Our products are sought after by civilian and military organizations spanning numerous markets, including Aviation, Communication, Electronic Warfare (EW/ECM/CIED), Industrial, Missile/UAV, Radar, Satcom, Space, and Test and Measurement. Our product portfolio is one of the most comprehensive RF/MW product lines in the world.
Siblings
-
Teledyne Leeman Labs
We are a company of scientists, engineers, and service professionals that are truly passionate about what they do, and that's atomic spectroscopy. Producing world-class instruments for elemental analysis is our mission. Our goal - through continuous innovation, dedication, and fresh thinking - is to constantly raise the bar, providing scientists and analysts with cutting edge instruments that deliver extraordinary results.
Siblings
-
Teledyne Marine Oceanscience (Obsolete)
Teledyne Oceanscience supplies the hydrologic and hydrographic community with deployment platforms for environmental monitoring and survey instrumentation. We manufacture remotely-controlled unmanned surface vehicles (USVs) for echo sounders and ADCPs. We also manufacture turnkey remote hydrographic survey boat systems, typically including environmental monitoring or bathymetry equipment, GPS positioning and data telemetry.
Siblings
-
Teledyne Marine Odom Hydrographic
2015 marked a milestone of 30 years of manufacturing echosounding equipment, Teledyne Odom Hydrographic (formerly Odom Hydrographic Systems) continues its legacy of unwavering dedication to the principles of customer service and product innovation. With over five thousand echosounders produced and distributed worldwide, Teledyne Odom Hydrographic has established an enviable high standard for product reliability and customer service that is unmatched.
Siblings
-
Siblings
-
Teledyne Marine RD Instruments
Teledyne RD Instruments was founded in 1982 and revolutionized the industry through the development of the first acoustic Doppler current profiler (ADCP). Now a part of the Teledyne Marine group, Teledyne RD Instruments continues to be an innovative force in the industry by designing, improving and manufacturing, proven solutions for current profiling, wave measurement, and precision navigation. With a staff of over 100 scientists, engineers, technicians, and sales and support personnel, the company's San Diego-based global headquarters is an 80,000 square-foot ISO-9001:2008 facility that includes state-of-the art engineering, laboratory, manufacturing, and test areas.
Siblings
-
Teledyne Marine RESON B.V.
Teledyne RESON, together with Teledyne BlueView and Teledyne Odom Hydrographic make up the Teledyne Marine Acoustic Imaging Group (TMAIG). We develop some of the world's most sophisticated sonar technology. The group offers the strongest collective product portfolio in the market for subsea acoustic imaging and multibeam echosounder solutions.
Siblings
Siblings
-
Teledyne Photometrics
Teledyne Photometrics designs and manufactures high performance Scientific CMOS, CCD and EMCCD cameras that support demanding, quantitative bio-research. The original architect of the first scientific-grade EMCCD, Teledyne Photometrics maintains its leadership role with the release of it’s award winning Prime, the sCMOS camera with built-in computational intelligence for image restoration, and Prime 95B, the industry’s first Scientific CMOS camera with 95% Quantum Efficiency for the highest sensitivity available. More recently, the company expanded it’s CMOS camera offerings to include the Prime BSI Scientific CMOS and the Iris 15 Scientific CMOS cameras.
Siblings
-
Teledyne SP Devices
Teledyne SP Devices designs, develops, and manufactures world-leading modular data acquisition and signal generation instruments. As a part of the Teledyne family with over 15 500 employees worldwide, we have access to some of the industry's most knowledgeable experts, research and development capabilities, and manufacturing facilities worldwide.
Siblings
-
Teledyne Princeton Instruments
Teledyne Princeton Instruments (TPI), a business unit of Teledyne Digital Imaging US, Inc, designs and manufactures high-performance CCD, sCMOS, ICCD, EMCCD, emICCD, and InGaAs cameras; spectrographs; and optics-based solutions for the scientific research, industrial imaging, and OEM communities. We take pride in partnering with our customers to solve their most challenging problems in unique, innovative ways. Teledyne Princeton Instruments has two U.S. manufacturing facilities, one located in New Jersey (Trenton) and one in Massachusetts (Acton). Our worldwide sales and service organizations in Germany, France, the United Kingdom, Japan, and China provide sales support and discuss application requirements in addition to being your local contacts for order processing and service.
Siblings
-
Teledyne Hanson Research
Hanson Research, an innovative leader in the design and manufacturing of dissolution testing and diffusion testing instruments for the pharmaceutical industry. Hanson Research, founded in 1951 by Dr. William A. (“Bill") Hanson, designed and manufactured the world's first six-vessel dissolution testers in 1969, and the first fully automated dissolution testing system, the Dissograph, in 1975. Widespread adoption of Hanson's technology along with an extensive support network made Hanson a trusted supplier for pharmaceutical development and manufacturing lab facilities in 75 countries worldwide. In the diffusion-testing line, focused on transdermal drug formulations, Hanson's innovative vertical diffusion cell, a modified Franz cell, led the way, eventually becoming officially incorporated into the United States Pharmacopoeia (USP) as “Apparatus A." Hanson's Microette™ automated diffusion testing system was first released in 2000, and an advanced design in 2014.
Siblings
-
Teledyne Princeton Instruments (Obsolete)
Teledyne Princeton Instruments (TPI), a business unit of Teledyne Digital Imaging US, Inc, designs and manufactures high-performance CCD, sCMOS, ICCD, EMCCD, emICCD, and InGaAs cameras; spectrographs; and optics-based solutions for the scientific research, industrial imaging, and OEM communities. We take pride in partnering with our customers to solve their most challenging problems in unique, innovative ways. Teledyne Princeton Instruments has two U.S. manufacturing facilities, one located in New Jersey (Trenton) and one in Massachusetts (Acton). Our worldwide sales and service organizations in Germany, France, the United Kingdom, Japan, and China provide sales support and discuss application requirements in addition to being your local contacts for order processing and service.
Siblings
-
Teledyne Marine
Teledyne Marine is a group of leading-edge subsea technology companies that are part of Teledyne Technologies Incorporated. Through acquisitions and collaboration over the past ten years, Teledyne Marine has evolved into an industry powerhouse, bringing Imaging, Instruments, Interconnect, Seismic, and Vehicle technology together to provide total solutions to our customers. Each Teledyne Marine company is a leader in its respective field, with a shared commitment to providing premium products backed by unparalleled service and support.
Siblings
-
Teledyne Marine AG Geophysical Products
AG Geophysical supplies the world’s marine seismic fleet with the highest quality submersible connectors engineered to work in the most hostile of working environments. AG Geophysical has built a reputation for solid engineering, performance that excels in the ocean’s depths and a reliability that won’t crack under pressure. As a company, our methods of production, quality assurance, technical support and service remain unparalleled in the marine seismic sector.
Siblings
-
Teledyne Marine BlueView
Teledyne BlueView is a worldwide leader in 2D imaging and 3D scanning sonar technology. The company’s advanced sonar systems are currently deployed on AUVs, ROVs, surface vessels, fixed positions, portable platforms, and have been adopted by leading manufacturers and service providers to support mission-critical operations.
Siblings
-
Teledyne Marine Bolt
Teledyne Bolt is a leading worldwide developer and manufacturer of seismic energy sources used in offshore seismic exploration for oil and gas.
Siblings
-
Teledyne Marine Bowtech
Teledyne Bowtech specialises in the design and manufacture of underwater vision systems including: video inspection systems, underwater cameras, underwater LED lights, xenon emergency relocation strobes, custom moulded cable assemblies, pan and tilts, electrical and fibre-optic connectors, fibre-optic multiplexers and slip rings for use in hazardous areas or subsea.
Siblings
-
Teledyne Marine Cable Solutions
Teledyne Cable Solutions is comprised of Storm Cable and VariSystems, an integrated alliance supplying engineered solutions to challenging cable situations. TCS provides application-specific, multi-core cable and ruggedized assemblies for a variety of industries.
Siblings
-
Teledyne Marine Cormon
Teledyne Cormon designs and manufactures subsea and surface erosion and corrosion sensors, as well as flow assurance monitoring systems.
Siblings
-
Teledyne Marine DGO
Teledyne DGO designs connection systems that transmit signals, data or power through challenging media, such as subsea oil wells, and through pressure barriers, such as the hull of a submarine. Because the cost of failure is so high, Teledyne DGO designs and manufactures its products to deliver total reliability. We engineer and manufacture our products as if lives and fortunes depended on them. Because they do. Teledyne DGO designs and manufactures systems to transmit signals, data and power in applications where failure to perform may contribute to substantial lost revenue, aborted missions or even loss of life: •Aircraft •Biomedical devices •Deep-sea exploration vehicles •Offshore oil and gas operations •Power generation, including nuclear power •Submarines
Siblings
-
Teledyne Marine Geophysical Instruments
Teledyne Geophysical Instruments has earned a strong reputation in the industry for delivering high-quality marine seismic exploration products. Our products are used aboard more than one-third of all commercial seismic research vessels.
Siblings
-
Teledyne Marine Impulse
Teledyne Impulse designs and manufactures high reliability electrical and optical interconnection systems, motorized power transfer switches, and custom insert molded compression connectors for a broad range of harsh environment applications. The company’s products are proven performers in the most demanding applications, which include oceanographic exploration, spacecraft and launch vehicles, defense, oil and gas production, nuclear systems, and wastewater management.
Siblings
-
Teledyne Marine Impulse-PDM
Teledyne Impulse-PDM designs and manufactures underwater connectors and harnesses for harsh environments. Impulse-PDM has over 30 years experience in mechanical, electrical, and optical design, as well as considerable expertise in material selection for subsea applications.
Siblings
-
Teledyne Marine Oceanscience
Teledyne Oceanscience supplies the hydrologic and hydrographic community with deployment platforms for environmental monitoring and survey instrumentation. We manufacture remotely-controlled unmanned surface vehicles (USVs) for echo sounders and ADCPs. We also manufacture turnkey remote hydrographic survey boat systems, typically including environmental monitoring or bathymetry equipment, GPS positioning and data telemetry.
Siblings
-
Teledyne Marine ODI
Teledyne ODI provides subsea electrical and fiber optic interconnect systems for the harshest environments and at any ocean depth. Wet mateable connectors include signal and high-power electrical, fiber optic, and hybrid electro-optical products all based on patented oil-filled, pressure-balanced technology. Dry mate submersible connectors also provided.
Siblings
-
Teledyne Marine Seabotix
The Seabotix vectored Little Benthic Vehicle (vLBV) is the ultimate MiniROV with over 1600 units sold over 20 years to every corner of the world. The vLBV300 system offers features for use in a full range of applications, industries, and environments. SeaBotix ROVs are industry accepted and field-proven in real-world conditions around the globe.
Siblings
-
Teledyne Marine PDS
Teledyne PDS is a multipurpose software platform and supports a wide range of tasks within Hydrography, Dredge Guidance, Construction Support, Search & Recovery Operations and Port Entrance Monitoring.
Siblings
-
Teledyne Marine Real Time Systems
Teledyne Real Time Systems provides seismic source synchronizing equipment to the global seismic data acquisition community.
Siblings
-
Teledyne Marine TSS
Teledyne TSS is a world leader in the design, manufacture and support of marine products for applications including navigation, motion compensation, platform stabilisation, and subsea pipe and cable survey. The company has specialist sales and support worldwide through a comprehensive network of distributors and service providers.
Siblings
-
Teledyne Webb Research
Teledyne Webb Research designs and manufactures scientific instruments for oceanographic research and monitoring. Teledyne Webb Research specializes in three areas of ocean instrumentation: Neutrally buoyant, autonomous drifters and profilers, autonomous underwater gliding vehicles, and moored underwater sound sources.
Siblings
-
Teledyne Lumenera
Teledyne Lumenera, part of the Teledyne Imaging Group, is a leading developer and manufacturer of high performance digital cameras and custom and OEM imaging solutions used worldwide for industrial and scientific applications.
Siblings
-
Teledyne e2v (Obsolete)
eledyne e2v is part of the Teledyne Imaging group of leading-edge companies aligned under the Teledyne umbrella. With unrivalled expertise across the spectrum and decades of experience, the collective of Teledyne Imaging offers world-leading technology and exceptional capabilities in sensing and synthesis, helping you capture better data and analyze it for better decisions.
Siblings
-
Teledyne AnaFocus
Teledyne AnaFocus is a supplier of standard off-the-shelf and customized high performance, high quality vision and CMOS sensor technology for the industrial, professional, scientific, medical and high end surveillance markets.
Siblings
-
Teledyne Defense Electronics
From advanced RF/Microwave systems to Hi-Voltage Interconnects & Components to comprehensive Space-qualified offerings and aerospace materials, our portfolio is sought after by technology leaders large and small worldwide. Leveraging the capabilities and the unique breadth of our many leading Teledyne Defense Electronics brands, we engineer solutions to meet your most complex specifications.
Siblings
-
Teledyne RF & Microwave (Obsolete)
Teledyne RF & Microwave has more than 50 years experience in the design, development, and manufacture of sophisticated components and integrated microwave assemblies optimized for the most demanding applications and harshest operating environments, from deep sea to space.
Siblings
-
Teledyne Relays
Teledyne Relays is Everywhereyoulook™, providing switching solutions for aviation, test & measurement equipment, industrial control, and military & space applications. With bandwidths from DC - 18GHz and signal integrity up to 40Gbps, Teledyne’s ultraminiature surface-mountable relays are perfect for high frequency and high throughput applications. Teledyne Relays offers industrial solid state relays for precise heating, lighting and motor control. For extreme environments and integration into ultraquality military systems, Teledyne offers military solid state relays.
Siblings
-
Teledyne Storm Microwave
Teledyne Storm Microwave has been providing high-quality interconnect products and cable assemblies to domestic and international defense, space and telecom markets since 1978.
Siblings
-
Teledyne Lincoln Microwave
Serving Defense, Space and Commercial sectors worldwide, Teledyne Defense Electronics (TDE) offers a comprehensive portfolio of highly engineered solutions that meet your most demanding requirements in the harshest environments. Manufacturing both custom and off-the-shelf product offerings, our diverse product lines meet emerging needs for key applications for avionics, energetics, electronic warfare, missiles, radar, satcom, space, and test and measurement.
Siblings
-
Teledyne Paradise Datacom
Teledyne Paradise Datacom, a division of Teledyne Defense Electronics, LLC, designs, manufactures and sells satellite modems, solid state power amplifiers (SSPA), block up converters (BUC) and associated redundancy subsystems. We deliver satellite communications products around the world.
Siblings
-
Teledyne Analytical Instruments
Teledyne Analytical Instruments (TAI) is a world leader in the design and manufacturing of high quality gas and liquid analyzers with a product line that includes: electrochemical sensors, analyzers and custom systems which combine expertise in electronics, chemistry and engineering. Our products and services cover many industries including: air separation/bulk industrial gas manufacturing, chemical and petrochemical processing, cement, metals and metal processing, oil and gas, medical/pharmaceutical, nuclear, power generation, pulp and paper, safety, semiconductor/ electronics and steel. With over 50 years of experience, TAI's mission is to meet the industry's varied requirements for gas and liquid analysis. In addition, detailed attention to our customers' needs and dedication to the highest standards of performance and quality are just some of our top priorities. These standards are enhanced by our ISO 9001:2015 certification.
Siblings
-
Teledyne OEM Solutions
SSI and CETAC join forces to leverage our liquid management expertise and automation solutions to deliver a one source solution that satisfies the needs of global instrument manufacturers (OEMs). Decades of serving OEMs with innovative solutions, using advanced technologies, over a broad spectrum of techniques (ICP to HPLC…) with a team that has a true passion to exceed our OEM customers' expectations.
Siblings
-
Teledyne Hastings Instruments
Teledyne Hastings Instruments is a trusted manufacturer of a wide range of quality Vacuum Instruments and Gas Mass Flow Instruments . Our vacuum product line includes the original DV-4 and DV-6 thermocouple gauge tubes, along with other vacuum sensors used in combination with meters and controllers that cover a wide range of vacuum pressure from atmosphere to ultra high vacuum. The gas mass flow line of meters and controllers cover a broad range of flow rates from 5 sccm to 15,000 slm that includes a variety of flexible options for outputs, calibration, and fittings.
Siblings
-
Teledyne ISCO
ISCO, Inc., was founded in 1958, and since its inception has been headquartered in Lincoln, Nebraska, USA. Through our focus on designing and building products to meet specialized customer needs, the company grew from founder Dr. Robert Allington's garage into its current 200,000 square foot plant. In June of 2004, Isco was acquired by Teledyne Technologies, Inc., becoming Teledyne ISCO and beginning a new chapter in the company's story. Today, Teledyne ISCO manufactures a wide range of products for professionals working in water pollution monitoring and abatement, engineers and managers involved with wastewater process control, and scientists involved in field and laboratory work. We have always taken pride in the fact that the products we produce are used by our customers to improve the quality of life on Earth. Benefits realized from the use of ISCO products range from maintaining a clean environment, to developing disease-curing drugs and finding new energy supplies.
Siblings
-
Teledyne Monitor Labs
Teledyne Monitor Labs (TML) has more than 50 year’s global experience in the design and manufacture of continuous emission monitoring systems (CEMS), process monitoring, industrial sensors and instruments, ambient monitoring and software. Our services and products serve the following industries: power generation, oil/gas refining, petrochemical, cement, lime, pulp and paper, steel, chemical, and agriculture.
Siblings
-
Teledyne Tekmar
Teledyne Tekmar is a leader in the design and manufacturing of analytical instrumentation for the laboratory providing productivity-enhancing instrumentation and solutions to a number of industries. Our world-renowned product lines include Volatile Organic Compound (VOC) systems for Gas Chromatography (GC) Sample Introduction, High-Throughput Purge and Trap sample concentration and Sample Automation. The Total Organic Carbon (TOC) Analyzers provides unparalleled accuracy, precision, throughput and robustness for water samples.
Siblings
-
Teledyne LABS
Teledyne LABS is a collection of decades-old Teledyne brands contributing to the research, development and manufacturing of laboratory instruments and technologies used around the globe. You’re sure to recognize some or all of the entities comprising Teledyne LABS. After all, we’re Everywhereyoulook™:
Related
-
Teledyne Technologies Incorporated
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
