Product

F58828B130G200

1170011

-

FEINMETALL GmbH

1170011 - FEINMETALL GmbH

The F58828B130G200 Basic Contact Probe is expertly designed for precision and reliability in various applications, operating effectively within a temperature range of -45°C to +80°C. Made from high-quality brass, this probe features a nominal travel of 9.30 mm, with a maximum travel capability of 11.70 mm, allowing for adaptive use in diverse environments. The probe's design ensures optimal contacting performance with a typical contact resistance of only 30 mOhm, making it ideal for applications that require stable conductivity.

Product

Basic Contact Probes (100 Mil) F77206B180G300E13

1009216

-

FEINMETALL GmbH

1009216 - FEINMETALL GmbH

The Basic Contact Probes (100 mil) model F77206B180G300E13, identifiable by order code 1009216, is a highly versatile component designed for precision measurements and robust electrical connections. Designed to operate in challenging environments, these probes can withstand temperatures ranging from -45°C to +80°C, ensuring reliability in various applications. With a pitch of 2.54 mm (100 mil), these probes are also engineered with a nominal travel of 4 mm and a maximum travel of 5 mm, providing enhanced mechanical performance for reaching sensitive areas without compromising accuracy.

Product

Step Recovery Diodes

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

MACOM’s Silicon and GaAs varactor multiplier diodes provide broadband performance ranging from 10 MHz to 70 GHz. They are ideal for multiplier circuits and are available in die form, plastic and ceramic packaging. These diodes boast a flip chip series for higher frequency millimeter wave applications; plastic packaged series for microwave frequency surface mount applications; ceramic packaged series for high power waveguide and coaxial applications.

Product

E Bend Waveguide

-

Marki Microwave

Marki Microwave

E-plane waveguide bends are sections of high-precision crafted waveguides and shaped to either 30º, 45º ,60º, or 90º angles for e-plane needs. It directs the radio frequency beam and “bends” the signal to go the direction you want. Think of it like Tokyo drifting around a corner in your car. Precision MMW will help you with the highest quality E bend waveguides. We are a millimeter wave spectrum manufacturer of various active and passive mmWave products and sub-system engineering.View more E Bend Waveguide

Product

Pogo Connectors (≤ 2,54mm / 100mil) P14016B085G080TL053ST

1000223

-

FEINMETALL GmbH

1000223 - FEINMETALL GmbH

The Pogo Connectors P14016B085G080TL053ST, with order code 1000223, are engineered for reliability and precision in electronic applications. Featuring a compact design with a pitch of 2.20 mm (87 mil), these basic contact probes excel in environments ranging from -45°C to +200°C. Their robust construction ensures longevity, making them suitable for high-performance applications where precision counts. This connector family, P-T / P140T-L053, is designed to deliver optimal performance with low contact resistance of only 100 mOhm and can handle continuous currents of up to 8 A. The connectors are tailored for a nominal travel of 1 mm and a maximum travel of 1.2 mm, guaranteeing effective engagement for various applications.

Product

PICMG 1.3 Full-size SBC

-

Axiomtek Co., Ltd.

Axiomtek Co., Ltd.

Axiomtek's PICMG 1.3 full-size CPU cards (338 x 126 mm) offer high performance PCI Express slot as interface to the backplane, and improve I/O bandwidth and graphic performance from the original PICMG 1.0 specification.

Product

32003

1026100

-

FEINMETALL GmbH

1026100 - FEINMETALL GmbH

The product 32003, bearing the order code 1026100, is a precision tool designed to meet a variety of needs in both professional and amateur settings. Ideal for equipment accessories, this tool features an expertly crafted outer diameter of 5.00 mm, enabling meticulous control in various applications. With a maximum tip diameter of 4.00 mm, it is engineered for high precision tasks, positioning it as an essential component in any toolkit.

Product

Basic Contact Probe P26502B230G150TL150ST

1018227

-

FEINMETALL GmbH

1018227 - FEINMETALL GmbH

The Basic Contact Probe (Model P26502B230G150TL150ST) is engineered for versatility and reliability in precision applications. Designed to operate within a wide temperature range of -45°C to +200°C, this probe is ideal for various environments, ensuring consistent performance under demanding conditions. With a pitch of 4.00 mm (157 mil), the probe is suitable for high-density connections and features a nominal travel of 2.80 mm, allowing for fine adjustments and accurate probing in compact spaces.

Product

SINE M-5 Sinusoidal Array

-

Applied Image, Inc.

Applied Image, Inc.

The Sinusoidal Array SINE M-5 is made on a strip of 70mm film approximately 5.12 inches (130mm) in length.The upper row contains the sinusoidal areas with the spatial frequencies in cycles per mm. All sinusoidal areas are carefully oriented with respect to the others, and the lines at the left end of the array have been added for alignment purposes.

Product

Glassy Carbon Electrodes – Straight & L-Type

GCE-1

-

PotentioLab

GCE-1 - PotentioLab

Imported glassy carbon electrodes with PTFE holders, available in straight and L-type configurations. Suitable for CV, EIS, electrocatalysis, corrosion studies, and electrochemical sensor research. Multiple diameters available from 1–12 mm, with custom sizes and electrode designs supported.

Product

3.5" Single Board Computers

-

Advantech Co. Ltd.

Advantech Co. Ltd.

Advantech's 3.5" embedded single board computers (SBC) measure 146 x 102 mm feature MIO extension, low-power Intel Atom™,and wide temperature support.

Product

4-in-1 OSLT Calibration Kit, DC to 50 GHz, 2.4 mm (m)

CK564A

-

Spanawave Corporation

CK564A - Spanawave Corporation

The Network Analyzer Calibration Kits with open, short, load, and thru (OSLT) provide the RF components needed to enable stable and accurate error correct measurements. Calibration of a network analyzer using Spanawave's Network Analyzer Calibration Kits allow for precise measurements. The Calibration Kits offer broad test equipment coverage for use with the 8003 Scalar Network Analyzer as well as being compatible with most network analyzers produced by other manufacturers. Spanawave calibration kits yield complete calibrations, as it takes into consideration the three major sources of systematic error correction by one port calibration at both ports.

Product

FEWZ-772E0

1003640

-

FEINMETALL GmbH

1003640 - FEINMETALL GmbH

The FEWZ-772E0, with order code 1003640, stands out as a versatile tool designed for various applications in the realm of tools and equipment, specifically within receptacles. This product boasts a total length of 100.00 mm and an outer diameter of 3.50 mm, making it ideal for precision tasks where space and dimensions are critical. It is crafted to facilitate optimal performance in diverse equipment setups, ensuring reliability and efficiency in professional environments.

Product

MMCX Connectors

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Pasternack MMCX connector category has many part numbers, most are RoHS and REACH compliant. MMCX connector series in this category will terminate to coax or PCB (printed circuit board). Our MMCX connector product line is built to precise microwave and RF industry specifications. MMCX connector items are constructed in jack or plug gender with 50 Ohm impedance. Connectors in the MMCX seris are available in straight or right angle versions, as well as, mountless options. These MMCX connector designs include crimp/solder or solder attachment methods. We offer MMCX connection products with standard or high performance levels constructed with brass or stainless steel bodies. As with the other over 40,000 RF, microwave and millimeter wave products from Pasternack, this MMCX connector series is in-stock. Not only in stock, but they also will ship the same day as purchased.

Product

Switch Probe F88617B300G900LM

1004233

-

FEINMETALL GmbH

1004233 - FEINMETALL GmbH

The F88617B300G900LM is a top-tier switch probe designed primarily for applications requiring precise and reliable operation under challenging conditions. This normally open (NO) contact probe, identified under the F886-NO family, showcases a robust temperature tolerance ranging from -45°C to +100°C, making it suitable for a diverse array of environments. Its exceptional design ensures accurate performance with a nominal travel length of 4.00 mm and a maximum travel of 5.00 mm, ensuring that it meets rigorous application standards effortlessly.

Product

Special Durometer

HD3000L

-

Hildebrand Prüf- und Meßtechnik GmbH

HD3000L - Hildebrand Prüf- und Meßtechnik GmbH

Type 1: Slim Probe 1, foot DIA. 8 mm for hard to reach areas or irregular shapes.Type 2: Chisel shaped (angled foot) for hard to reach or narrow areas.Type 3: Slim Probe 2, DIA. 5.0 mm. A thinner foot for reaching hard to get places or irregular shapes. Custom designed durometers conform to the Hildebrand Company standard.

Product

Switch Probes (Normally Open (NO)) F88506B230G900LM

1004329

-

FEINMETALL GmbH

1004329 - FEINMETALL GmbH

The Switch Probes (Normally Open) F88506B230G900LM is engineered for versatile applications in varying environments. Its basic contact probe design ensures reliable performance in temperature conditions ranging from -45°C to +100°C. With a compact pitch of 3.50 mm, this probe delivers precision in its applications while maintaining a robust structure suitable for rigorous use, making it ideal for demanding technical operations. In addition to its operational efficacy, the probe features a nominal travel of 4.00 mm and a maximum travel of 5.00 mm, optimizing its functionality and adaptability in the field.

Product

Digital Image Correlation System for Complete 3D Warpage, Thermal Expansion, and Strain Analysis of Materials and Components in the Heating and Cooling Phase

Q-400 TCT

-

Dantec Dynamics A/S

Q-400 TCT - Dantec Dynamics A/S

The Q-400 TCT system is designed for complete three-dimensional and highly sensitive warpage, thermal expansion measurement and strain analysis of materials and components in the heating and cooling phase. Areas from 50 mm x 70 mm down to 2 mm x 3 mm can be investigated. Measurements can be done from room temperature up to 300°C and down to -40°C. The system is specially suited for thermal expansion measurement of electronic components and is frequently used in the development and testing of complex anisotropic materials, components, and structures in electronic applications.