Product

Switch Probes (Normally Open (NO)) F87505B180G200

1001713

-

FEINMETALL GmbH

1001713 - FEINMETALL GmbH

The Switch Probes (Normally open (NO)) F87505B180G200, identified by order code 1001713, is engineered to provide precision and reliability for various applications. With a temperature range of -45°C to +100°C, this probe is ideal for use in environments that require robust performance across a broad spectrum of conditions. Its basic contact probe design is optimized for ease of integration, characterized by a family designation of F875-NO, which ensures consistency in its operation. The innovative mechanical features include a preload of 60 cN, a spring force of 200 cN, and precise travel metrics of 1.5 mm for switch travel while maintaining an impressive pointing accuracy of ±0.08 mm.

Product

Basic Contact Probes (138 Mil) F77318B180G300

1001532

-

FEINMETALL GmbH

1001532 - FEINMETALL GmbH

Introducing the Basic Contact Probes (138 mil) F77318B180G300, a specialized solution designed for precision applications in demanding environments. This model boasts a pitch of 3.50 mm (138 mil), ensuring accuracy and reliability across various electrical and mechanical specifications. Able to operate within a temperature range of -45°C to +80°C, these probes are suitable for diverse settings, delivering consistent performance in critical applications.

Product

Electromagnetic Force Fatigue And Endurance Testing System

EMT Series

-

Shimadzu Corp.

EMT Series - Shimadzu Corp.

High-speed repeated load tests can be carried out with a maximum velocity of 2 m/s, and maximum stroke of ±50 mm, using clean and quiet electromagnetic force as the driving power, without the use of oil. The test space is large so environmental tests can also be carried out using the constant temperature tank (option).

Product

For AIM-65, AIM-68, AIM-75S And AIM-78S

LAN+COM Module

-

Advantech Co. Ltd.

LAN+COM Module - Advantech Co. Ltd.

Black130.2 x 70 x 29 mm (5.13 x 2.76 x 1.14 in)0.078 kg (0.171 lb)

Product

Versatile Test Stand

VTS-2100

-

Applied Scientific Instrumentation

VTS-2100 - Applied Scientific Instrumentation

*Base is a Breadboard on 25 mm centers tapped for M6 screws with threaded holes for risers for TE/TI-2000, TE-300, IX-71/81, DMI, and MS-2000 stages.*Base feet provide vibration isolation.*Z riser is adjustable on pillar blocks.*Z motion from LS-50, LS-100, or LS-150 linear stage.*Z illumination can use LED, LED and a Condenser (from below), or fiber illumination (from above).*Observation is with a Modular Infinity Microscope.

Product

Low-Voltage Twin-Lead Tester

69134

-

Klein Tools, Inc.

69134 - Klein Tools, Inc.

Tests 5-50 volt, AC or DC circuits and components.Built-in lamp glows if circuit is live.Each of the 4-1/2'' (114 mm) test leads has an alligator clip on the end.Handy pocket clip.

Product

Beam Directional Power Supply Mains

SiteX CP160D

-

Teledyne ICM

SiteX CP160D - Teledyne ICM

The CP160D is the lightest and most compact generator of the CPSERIES. Featuring a built-in Beryllium window, it is the perfect generator for the inspection of light alloys such as aluminum, magnesium or fiber based materials like glass and carbon, as well as the greater thickness of steel. In fact, with its penetration capacity that is capable of reaching up to 37 mm of steel, the CP160D is able to execute many different types of NDT tasks without the need to ever have to add extra accessories.

Product

ICT/FCT-Fixtures Max UUT 370 × 300 mm (wxd)

CK-2-228X (Large IF) / 230532

-

Columbia Elektronik AB

CK-2-228X (Large IF) / 230532 - Columbia Elektronik AB

The series of In-Circuit testers that are Teradyne for the 228x and TestStation are dedicated tools that rely on the tester hardware for diagnostics and test pattern delivery. The integration of the stand-alone BTS with the Teradyne ICT can enhance the system’s capability. In other words, it can provide access to additional tools. It provides the user with a common platform and portability of test patterns from stand-alone to ICT and later on to functional test and depot test stations.

Product

F75689B0014G150SP

1156223

-

FEINMETALL GmbH

1156223 - FEINMETALL GmbH

The F75689B0014G150SP is a high-performance step probe designed for precision applications, capable of operating within a temperature range of -45°C to +200°C. Engineered for durability, this probe utilizes high-grade steel springs and features a plunger made of beryllium copper plated with gold, ensuring excellent electrical conductivity and longevity. Its compact design details a total length of 41.85 mm and a projection height of 10.30 mm, making it an ideal choice for applications requiring meticulous measurement and minimal space requirements.

Product

Benchtop/Portable Cable/Harness Wiring Test System

CKT1175-10

-

CK Technologies, Inc.

CKT1175-10 - CK Technologies, Inc.

Designed for wiring testing requirements requiring up to 2,000 test points, the CKT1175-10 is ideal as a benchtop or portable test system. The system is packaged in an enclosure specifically designed to be used in rugged environments. The basic 500 test point system is 20.5 in. (521 mm) wide X 12.0 in. (305 mm) high X 16.05 in. (408 mm) deep; the 500 test point expansion units are 20.5 in. (521 mm) wide X 6.00 in. (153 mm) high X 16.05 in. (408 mm) deep.

Product

Single Sheet Tester (500 x 500) mm

-

R&J Measurement

R&J Measurement

Single Sheet Tester (500 x 500) mm is designed to measure dynamic magnetic properties of the electrical sheet according to IEC 60404-3 Standard. Single Sheet Tester (500 x 500) mm could be cooperating with following equipment designed to measuring soft magnetic properties:

Product

Switch Probe (Normally Open (NO)) F88617H300U350LM

1005718

-

FEINMETALL GmbH

1005718 - FEINMETALL GmbH

The Normally Open Switch Probe F88617H300U350LM (item number 1005718) combines spring-loaded contacting with a defined switching or sensing function. F88617H300U350LM combines electrical contacting with a switching signal so that DUT presence or position can be evaluated directly in the test sequence. In F88617H300U350LM, the normally open function closes the electrical contact at the defined actuation travel, combining contacting with presence or position information. For F88617H300U350LM, spring force is 350 cN at a nominal travel of 4 mm. The electrical rating of F88617H300U350LM combines 10 A continuous current with 50 mΩ typical contact resistance. F88617H300U350LM combines a pitch of 3.5 mm / 138 mil with tip style 17H (Synthetic head with slot and metal ring) and a tip diameter of 3 mm.

Product

Displays – LCD, TFT, OLED, Touch - 7-Segment Displays

-

Vishay Intertechnology, Inc.

Vishay Intertechnology, Inc.

Vishay’s 7-segment LED displays are used in a wide variety of end products including test and measurement equipment, point-of-sale terminals, telecom systems, office equipment, consumer electronics, and medical equipment. Options include 7 mm, 10 mm, and 13 mm leaded and surface-mount packages, and color choices including green, red, orange-red, yellow, soft orange, super red, and super yellow.

Product

Plunger Clip

BU-00201-0

-

Meuller Electric Company

BU-00201-0 - Meuller Electric Company

Plunger clip • Material: Cap & Body: glass filled nylon; Spring: Stainless steel; Contact: beryllium copper; insulator to a single contact point • Length: 1.75” (44 mm)(BU-00201-*); 2.50” (63 mm)(BU-00202-*); 3.50” (88 mm)(BU-00203-*); • *Std Colors: -0 Black -2 Red • Rating: 1000 Volts, 10 Amps.

Product

01 With Pins For PCB | 10 Positions | M10

01-1xxx-20/70xx-10-N

-

ELMA Electronic, Inc.

01-1xxx-20/70xx-10-N - ELMA Electronic, Inc.

Multi wafer compact selector with 36° detent angle, 6 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque

Product

FEWZ-075E50

1000746

-

FEINMETALL GmbH

1000746 - FEINMETALL GmbH

The FEWZ-075E50 is a versatile tool designed specifically for the receptacle category within the broader tools and equipment classification. Product code 1000746 indicates this specific model, ensuring that users receive the precise equipment necessary for their applications. With a total length of 85.00 mm, this tool is compact yet powerful, crafted for efficiency and ease of use in various settings. Additionally, the FEWZ-075E50 comes equipped with a probe tool (order code: 1012173-H075WL11-7.6), enhancing its functionality and making it ideal for both professionals and hobbyists who demand precision in their work. This blend of compact design and exceptional capability makes the FEWZ-075E50 a must-have for those in need of specialized tools for receptacles.

Product

Portable Connector End Face Geometry Interferometer

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs’ Vytran® Connect-Chek® Interferometer automatically and precisely measures radius of curvature, apex offset of polish, and fiber undercut or protrusion on any PC or APC, single-fiber connector. The CC6000 interferometer uses a non-contact tilted-phase-analysis technique for fast, reliable measurements of connector end faces. This compact interferometer has a carrying handle and must be attached to a desktop or laptop computer (not included) with a standard USB 2.0 port for operation. The included CC6000 software, which is used to control the interferometer, can be installed on a computer with the minimum requirements in the table below. Designed for use in both the factory and the field, this interferometer provides crucial quality information needed to assure long-term performance of fiber optic connectors. One CC250P Mount for Ø2.50 mm PC Connectors and one RT250P Reference Tool for calibrating the CC250P mount are included with the CC6000 interferometer; mounts and reference tools that enable measurement of other PC or APC, single-fiber connectors are available separately below. When used with an appropriate mount for APC connectors, the CC6000 interferometer is also capable of measuring the APC angle and key error.