Product

24-Channel Digital I/O With Digital Integration Features On M.2

M.2-DIO-24A

-

Acces I/O Products, Inc.

M.2-DIO-24A - Acces I/O Products, Inc.

The M.2-DIO-24A is an M.2 card, and optional cable assembly (D-Sub 37-pin Male connector) designed to be easily panel-mounted in any application environment. It uses the high speed PCI Express bus to transfer digital data to and from the card. The digital I/O is compatible with 8255 PPI chips making it easy to program. This also allows for simple and trouble-free migration from other ACCES PCI and PCI Express digital I/O cards, but also provides for advanced features enabled by the onboard FPGA logic.

Product

PXI Switching Instrumentation

-

Marvin Test Solutions, Inc.

Marvin Test Solutions, Inc.

Marvin Test Solutions’ switch card portfolio includes matrix, multiplexer, and RF multiplexer configurations. 3U and 6U PXI switch cards feature easy to use, reliable, and integration-friendly D-sub style interface connectors – a feature unique to Marvin Test Solutions PXI switch cards. GENASYS switch cards are compatible with MTS’s family of GENASYS Switching and Switching/Digital Subsystems, featuring integrated MAC Panel SCOUT receivers.

Product

Micro Dsub GPIB Cable Adapter For PZ2100A (0.25m)

-

Keysight Technologies

Keysight Technologies

The Keysight PX0110A converts MicroD25 GPIB to standard GPIB. It supports the Keysight PZ2100A.Standard GPIB to MicroD25 Cable length: 0.25 meter Compatible with the PZ2100A

Product

PCI Expansion Card

4624-3

-

VECTOR Electronics and Technology, Inc.

4624-3 - VECTOR Electronics and Technology, Inc.

120 contacts (60 each side) on 0.050" centers. Overall GND plane, Pad-Per-Hole, Peripheral Buses. Isolated pads around each hole. 32-bit ISA format. Universal tab fits both 3.3V and 5V tab notch patterns. Mounting bracket included.Peripheral buses for voltage and ground distribution.I/O mounting area for D-sub and ribbon cable connectors.

Product

SP5T RF Pin Diode Switches To 12 GHz

-

Pulsar Microwave Corporation

Pulsar Microwave Corporation

Pulsar Microwave's 5-way RF switches cover bands from 300 MHz to 12 GHz in both absorptive and reflective configuration. These SP5T switches have a rating of 200 mW maximum input power and a switching time of 100 ns. They are specified with a minimum isolation of 60 dB and most models maintain a VSWR of 1.6:1 or better on all ports. The SP5T switches are driven by TTL logic control circuitry and require both positive and negative 5-volt supplies for operation. A 9-pin D-SUB connector provides the interface for the power and logic voltages.

Product

Breakout Box

T1000-37

-

Tesuto Systems

T1000-37 - Tesuto Systems

T1000-37  breakout box is our most versatile model, using dual 37 pin D-Sub connectors for signal capture or monitoring. Dual connectors provide a total of  74 test points plus a ground jack. All test points use standard size 4mm banana jacks. Test points may be connected using shorting banana cable to allow signal continuity. Ideal for continuity measurements, isolation testing, and signal capture.

Product

4-Port Serial Interface

APCI-7500-3

-

TEAM SOLUTIONS, INC.

APCI-7500-3 - TEAM SOLUTIONS, INC.

This Model has a 37-pin D-Sub male connectorRS232, RS422, RS485, 20 mA Current LoopModular structure through SI modulesWith or without optical isolationMode configuration free for each port128-byte FIFO-buffer, common interruptTransfer rate programmable up to 115,200 BaudOption: up to 1 MBaud for RS485 and RS422Automatic direction recognition for RS48Mode: configurable RS232, RS422, RS485, 20 mA Current Loop (active, passive) with or without isolation (SI modules)Transmission mode asynchronous, full, half duplexTransfer rate: progr. up to 115.2 kBaud up to 1 MBaud on requestProtocol: 5, 6, 7 or 8-bit character 1, 1? or 2 stop bitsParity: even, odd, none, mark or spaceInterrupt lines: automatic through BIOS

Product

USB/RS232/SPI Programmable Attenuator

RUDAT-13G-90

-

Mini-Circuits

RUDAT-13G-90 - Mini-Circuits

Mini-Circuits’ RUDAT-13G-90 is a general purpose programmable RF attenuator supporting frequencies from 10 to 13000 MHz with attenuation from 0 to 90 dB in 0.5 dB steps. Its unique design maintains linear attenuation change per dB, even at the highest attenuation and frequency settings. The attenuator is controlled via USB, RS232 or SPI. It comes housed in a compact, shielded metal case with SMA(F) input/ output RF ports (RF ports are interchangeable), a USB type Mini-B socket, and a 9-pin D-sub(F) RS232 and SPI port. Power can be supplied via either USB or the D-sub port. The RUDAT-13G-90 is supplied with our easy-to-install, user-friendly GUI software, API objects for Windows® environments, and complete programming instructions for 32 and 64 bit Windows® and Linux® operating systems. See p. 9 for a complete list of included accessories.

Product

IBM PC-XT, Vectorbord Plugbord

4613-1

-

VECTOR Electronics and Technology, Inc.

4613-1 - VECTOR Electronics and Technology, Inc.

62 contacts (31 each side) on 0.100" centers. Voltage and ground buses around board perimeter on both sides. Auxiliary bus line along lower edge of board on both sides. I/O mounting area for 37-pin D-sub and ribbon cable connectors. Mounting bracket and hardware kit included (P/N HD36B).

Product

Solder Cup Connector Kit

Y1140A

-

Keysight Technologies

Y1140A - Keysight Technologies

Used to build custom cables for 34922, 34924 – 78-pin Dsub female – 60 V

Product

PXI Switching Instrumentation

GENASYS

-

Marvin Test Solutions, Inc.

GENASYS - Marvin Test Solutions, Inc.

Marvin Test Solutions’ switch card portfolio includes matrix, multiplexer, and RF multiplexer configurations. 3U and 6U PXI switch cards feature easy to use, reliable, and integration-friendly D-sub style interface connectors – a feature unique to Marvin Test Solutions PXI switch cards. GENASYS switch cards are compatible with MTS’s family of GENASYS Switching and Switching/Digital Subsystems, featuring integrated MAC Panel SCOUT receivers.

Product

15 Ft Cable, 78-Pin Female Connector On One End, Loose Wired (Numbered) Other End

GT97113

-

Marvin Test Solutions, Inc.

GT97113 - Marvin Test Solutions, Inc.

15' harness, 78-pin female D-sub connector on one end, loose wired (numbered) other end.

Product

16 Hole Back Extension

9561-BE

-

Strobe Data Inc.

9561-BE - Strobe Data Inc.

Enclosed version of the cabling "doghouse" for the Hawk/PC chassis with rear panel punched to accommodate 16 50/37 pin d-sub connectors. Hinged for access to the rear of the DG-style backplane.