Filter Results By:
Products
Applications
Manufacturers
-
product
Full 3D Inline Metrological & Imaging AOI
Metrological Full 3D AOI is achieved by measuring all 3 dimensions (X, Y and Height) to detect every measurable solder and component defect pre-reflow and/or post reflow soldering.
-
product
(AOI) Automated Optical Inspection Systems
For automated defect detection and high-accuracy measurements. VisionGauge Online High-Speed AOI systems are perfect solutions for demanding high-throughput, high-resolution applications. These systems are perfect for a wide range of applications including MicroElectroMechanical systems (for MEMS inspection or MEMS measurement), semiconductor & discrete device inspection and measurement.
-
product
3D Automated Optical Inspection System
EAGLE 3D 8800 SERIES
EAGELE 3D 8800 AOI applies 8-way projection for 3Dmeasurements to all models, minimizing shadow effectserrors and performing 100% 2D&3D examinations simultaneouslyin all FOV areas.
-
product
DSP-Based 4/8-Axis Advanced Pulse-Train Motion Controllers
AMP-204C/AMP-208C
ADLINK"s new AMP-204C/AMP-208C DSP-based 4/8-axis advanced pulse-train motion controllers incorporate up-to-date floating-point DSP and FPGA technology, enabling high pulse output and encoder input frequency up to 6.5 MHz and 20 MHz respectively. Leveraging ADLINK" s Softmotion technology, the AMP-204C/AMP-208C offer impressive comprehensive and application-oriented motion functionality to reduce development time while maintaining superior throughput and accuracy. Superior synchronous motion control performance combines with point-table function integrating multi-dimensional interpolation, such as 3D linear/circular/spiral interpolation with enhanced trajectory and velocity planning, for contouring applications in semiconductor, display and conventional manufacturing industries. The AMP-204C/AMP-208C also support PWM control with three different control modes for frequency or duty cycle, benefiting laser engraving/marking/cutting applications. Moreover, hardware-based position comparison and trigger output are applicable in AOI applications.
-
product
Centralized Motion Controller
ADLINK‘s pulse train controllers provide comprehensive and application-oriented motion functions for servo and stepper motors through digital signal processing (DSP)-based and Application Specific Integrated Circuit (ASIC)-based two pulse train mode controllers to achieve excellent synchronous motion control and precise positioning suitable for laser engraving, marking and cutting applications in semiconductor, AOI, and conventional manufacturing industries.
-
product
Bottom-up and Top-down 3D Modular AOI
SpectorBOX
With up to 9 cameras per side (18 total), it is designed to inspect PCB’s inside solder frames from the heavy duty conveyor system suitable for assemblies up to 5kg. Inspection of PCBs without solder frames is also possible. The PowerSpector 550BTL handles PCBs with a maximum dimension of up to 550x550mm (21.6”). The PowerSpector 350BTL is designed for medium Size PCB’s up to 350x250mm (13.8″x9.8″).
-
product
Automated Optical Inspection System
AV880 Series
The AV880 Series of AOI solutions from ASC International provides the same high level inspection capabilities as found in our AV862/AV871 Series of AOI systems all wrapped into an inline platform for continuous flow requirements. A price to performance ratio sure to please those looking for a quick ROI.
-
product
4-Channel High Speed Position Comparison And Trigger Module
ECAT-TRG4
The ECAT-TRG4 is EtherCAT SubDevice module with high-speed position comparison trigger and encoder single redriver function, helping machine and equipment builders to use multiple triggers simultaneously for AOI, glue dispensing, display tests, and storage assembly applications.
-
product
3D AOI Series
MV-6 OMNI
- Exclusive 15MP / 25MP CoaXPress Camera System- OMNI-VISION® 3D Digital Tri-Frequency Moiré Technology- Leading-Edge 12 Projection Blue DLP Technology- Precision Compound Telecentric Camera Lens- Eight Phase Color Lighting System- 10MP / 18MP SIDE-VIEWER® Camera System- Programmable Z-Axis Multi-Focus System- INTELLI-PRO® Automatic Programming Software- Multi-Functional AOI-SPI Fusion Technology- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
Conformal Coating Inspection (CI AOI)
They cover the components, the area around the components and identify most coating issues including cracks, bubbles, insufficient / excess coating, loss of adhesion and other common contaminations. Full coverage inspection for conformal coating.
-
product
Automated Optical Inspection (AOI)
TR7700 SIII 3D
TRI’s ground breaking 3D AOI solution delivers the fastest hybrid PCB inspection combining optical and blue-laser-based true 3D profile measurement for the highest automated defect symptom coverage possible. Integrated state-of-the-art software solution and third generation intelligent hardware platform offer stable and robust 3D solder and component defect inspection and with high inspection coverage and easy programming.
-
product
Automated Optical Inspection
K Series3D
K Series and K Series3D are the reference in Automated Optical Inspection (AOI), allowing 2D and 3D inspection with very low false calls rate, for both pre-reflow and post-reflow. They are the most powerful gatekeepers to guarantee high quality level for the assembled PCB.
-
product
Software Products
Working on the premise to ease system operation, increasing inspection capabilities while providing full traceability MVP Software Products encompass a range of tools driven directly from the data generated at the AOI systems, as well as optional links back to the production lines and monitoring of the data they generate also.
-
product
DSP-Based 4/8-Axis Advanced Pulse-Train Motion Controllers
AMP-204C/AMP-208C
ADLINK"s new AMP-204C/AMP-208C DSP-based 4/8-axis advanced pulse-train motion controllers incorporate up-to-date floating-point DSP and FPGA technology, enabling high pulse output and encoder input frequency up to 6.5 MHz and 20 MHz respectively. Leveraging ADLINK" s Softmotion technology, the AMP-204C/AMP-208C offer impressive comprehensive and application-oriented motion functionality to reduce development time while maintaining superior throughput and accuracy. Superior synchronous motion control performance combines with point-table function integrating multi-dimensional interpolation, such as 3D linear/circular/spiral interpolation with enhanced trajectory and velocity planning, for contouring applications in semiconductor, display and conventional manufacturing industries. The AMP-204C/AMP-208C also support PWM control with three different control modes for frequency or duty cycle, benefiting laser engraving/marking/cutting applications. Moreover, hardware-based position comparison and trigger output are applicable in AOI applications.
-
product
Optical Inspection Machine
3D AOI
3D AOI latest optical inspection machine 1. No part dead angle, 4-way projection, complete measurement 2. Part height measurement, accurate measurement of defects 3. Multi-piece inspection without additional program 4. DLP digital projection, program editable height measurement
-
product
Advanced Automated Optical Inspection (AOI)
V510i Optimus 3D
V510 has high productivity, the superior detection capability and inductory fastest inspection speed. It is by High Speed Multi Frequency Phase Shift Profile technology and simultaneous inspection method of 2D/3D. V510 can inspect that without influencing the surface condition and the warp of the board by unique lighting technology.By much algorithm, inspevtion of the component smoothness and the very small component is possible.
-
product
AOI Handlings System
The AOI handling system is a compact facility with various test units. Via an ionization cleaning station the ceramics are transferred to the contacting station. There, the resistance values of the substrates are tested with a rigid needle adapter. Afterward, the ceramics are further conveyed to the three (optionally four) AOI test stations (for automatic optical inspection) and are tested for cracks, unevenness, faulty imprints, contamination, etc. The poorly evaluated ceramics arrive at a review station where the operator can assess and evaluate the errors on the monitor. If the operator is uncertain about a fault, the ceramic in question can be positioned under the microscope position and inspected by eye. Poorly defined ceramics are marked accordingly with an ink pen.
-
product
SPI | AOI | AXI
Suitable for a wide variety of SMT applications, Omron’s automated inspection solutions are designed to ensure the highest degree of quality and consistency in PCB production.
-
product
Automated Optical Inspection System
506
We are proud to introduce the latest member of our model 505 AOI product family, the 506. This system was developed to provide a high coverage, easy to program AOI system for the larger backplanes / backpanels being produced today.
-
product
Process Improvement Software for SPI & AOI
SIGMA Link
SIGMA Link software suite links altogether solder paste inspection (SPI), automated optical inspection (AOI) and manufacturing execution system (MES). For Smart Factories, SIGMA Link is the essential element to connect inspection machines to Manufacturing Execution System. This real-time interface ensures full traceability and enables interlocking of machines to automate SMT lines while driving yield to new levels.
-
product
Turn-key Capabilities
RoHS Compliant
Complete turn-key solution involves design service, component procurement service, component manufacturing, final assembly, X-ray/AOI service, functional/parametric testing and customized packaging.
-
product
Automated X-ray Inspection (AXI)
Automated X-ray inspection (AXI) is a testing approach based on the same principles as automated optical inspection (AOI). Instead of cameras, X-rays are used to automatically inspect features.
-
product
Machine Vision Computers
AIIS Series
Advantech AIIS Series are closely aligned with Machine Automation applications such as Automated Optical Inspection (AOI), Wafer Inspection, and alignment inspection which heavily rely on machine vision.
-
product
Automatic and Accurate Inspecting Systems
Circuit AOI
The Circuit AOI system is designed to perform automatic and accurate inspecting systems. It integrates rigid mechanical system with advanced vision technology and manufactured and tested by strict is standards. It is suitable for circuit inspection for PCB/FPC, verification and repair. Innovation and unique inspection algorithms are applied to inspect open, short, protrusion, nick, scratch, pin hole, island, line width/space violation, object missing and others defects. AOI system can use offline setup project and check results. It will improve the throughput.Compare to halogen lighting, the full angle LED lighting of Circuit AOI can obtain the best image contrast and is good for different panel type inspection.
-
product
AOI & SPI, Test Systems
SigmaX SPI
Most defects in the circuit-board assembly are due to the solder paste or the process of printing solder paste. Since the transition to lead-free soldering, a whole new spectrum of problems has emerged in older paste printing and its due processes. Incomplete coalescence of ball grid array (BGA) spheres and solder paste deposits are failure modes that have increased in frequency since the transition to lead-free soldering. The SigmaXs inspection technology is unaffected by varying materials, surface conditions, or colors. The system profiles the board to generate accurate 3D shapes far superior to other brands and technologies.
-
product
SMT AOI
All MVP products have the unique ability to be deployed in all inspection scenarios from Paste to Post Reflow without changing hardware, allowing maximum utilization of your investment. With Versa, Selecta, Spectra and GEM Platforms, MVP provides the AOI solutions to meet your production requirements.
-
product
Microelectronics And Packaging AOI
Machine Vision Products, Inc. has extensive experience in a wide range of Microelectronics and Packaging applications. MVP works with the world’s leading manufacturers on a global basis. From multiple die and wire technologies to leadframe, ball grid array and surface inspection applications, MVP has the widest applications toolbox of any AOI provider. MVP takes pride in the fact that they supply many complex inspection solutions to diverse industries such as Automotive, Telecoms, Medical Devices, Military, and Space. MVP’s 900 Series is the base platform upon which all Microelectronics and Packaging inspection solutions are based. The 900 series 2D capabilities provide metrology and defect detection using a propriety Quad-Color lighting, Telecentric optics and resolutions down to 1um. 3D height measurement capabilities allow for in-line high speed inspection of Dies, paste deposition, positional accuracy, volume and height with a resolution down to 1.13um.
-
product
Advanced 4-CH Encoder Card With High-Speed Triggering Function
LPCIe-8124-C
The LPCIe-8124-C delivers versatile position comparison & high speed trigger output, making it ideal for a wide range of applications such as AOI and distance measurement. With a PCIe interface, LPCIe-8124-C is compatible with a wide variety of high performance systems.
-
product
Box IPC
These IPC are compact design with front I/O and aim at industrial automation and equipment manufacturing applications, such as machine vision and AOI.
-
product
SCANNER BASED IN-LINE & DESKTOP AOI
SS15000-PAL & SS15000-IL
AOI Systems ScanSpection uses two basic algorithm groups to inspect component and soldering. The first algorithm checks the component related parameters at once, with these being entered to a Model training phase. The second algorithm group is for solder and lead inspection and offers the ability to use the optimum algorithm for the type of inspection to be carried out. In addition the solder inspection and lead inspection can be attached to a package type rather than component type to assist in programming.
