I²C
A slow Inter-Integrated Circuit bus protocol.
-
Product
Temperature Controlled Microscope Stage
-
Linkham Scientific Instruments
Specialists in temperature controlled microscopy, Linkam Scientific Instruments, announce the launch of their Optical DSC450 which enables simultaneous visualization of thermal processes for improved materials characterisation. The Optical DSC450 enables the user to measure glass transitions and melting behaviour of a wide range of substances whilst accurately controlling temperature from -196 °C to 450 °C. The atmosphere of the stage can also be purged with gas as required by the user. A new feature which will increase the characterisation capabilities of the DSC system is to combine it with imaging capability. The new LINK Digital Imaging module enables additional information to be obtained by correlating optical changes such as colour with temperature. The new TASC analysis tool takes this further. TASC (Thermal Analysis by Surface Characterisation) is a new image analysis capability which enables structural changes in samples to be tracked and quantified optically. It has the unique ability to measure local transition temperatures allowing different points on a sample to be identified. The new DSC system is great tool to use in research and quality control to measure quantitative values for glass transitions, melting peaks and sample purity and, when combined with TASC, even sample homogeneity.
-
Product
SparkFun Qwiic Thermocouple Amplifier
MCP9600 (Screw Terminals)
-
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction). As a result, the MCP9600 can read both the ambient temperature and the temperature of whatever you're trying to measure! The MCP9600 can do both with a resolution of 0.0625°C, and an accuracy of ±1.5°C (worst-case). The MCP9600 Thermocouple Amplifier is one of our many Qwiic compatible boards! Simply plug and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
-
Product
F07515S120L200
1168163
-
Introducing the F07515S120L200 Basic Contact Probe, engineered for reliable and accurate connectivity in various applications. Designed to operate within an impressive temperature range of -45°C to +80°C, this probe ensures performance stability under extreme conditions. Its robust construction is enhanced by a Sandvik plunger, coated with Longtime Gold for optimal durability, while the bronze barrel, plated with gold, guarantees resistance to wear and corrosion. Additionally, the probe embodies precision engineering with a typical contact resistance of only 20 mOhm, ensuring efficient electrical conductivity for any demanding task.
-
Product
Step Probes (F731SP) F73116B0006G150SP
1008862
-
The Step Probes (F731SP) F73116B0006G150SP are meticulously crafted for precision and reliability in various applications requiring pin probing technology. Designed for harsh environments, these probes operate effectively in a temperature range of -45°C to +100°C, ensuring adaptability across a multitude of conditions. The F731SP features a pitch of 2.40 mm and a nominal travel capability of 3.50 mm, designed to provide accurate readings with a pointing accuracy of ±0.08 mm.With robust mechanical specifications, these probes exhibit a preload of 50 cN and a spring force of 150 cN, which contribute to their excellent performance under continuous current conditions of up to 5 A. The construction materials further enhance durability: the plunger is made from beryllium copper with gold plating, while the barrel is brass, also plated with gold for better conductivity. This product represents a blend of innovation and technical excellence, making it an ideal choice for professionals in need of reliable and precise measuring instruments.
-
Product
NI-9221, ±60 V, 800 kS/s, 12-Bit, 8-Channel C Series Voltage Input Module
779014-01
Voltage Input Module
±60 V, 800 kS/s, 12-Bit, 8-Channel C Series Voltage Input Module - The NI‑9221 performs single-ended analog input. The wider voltage range makes this module well suited for industrial-level, automotive, or even smaller-cell battery measurements. There are two connector options for the NI‑9221: a 36‑position spring‑terminal connector and a 37-position D‑SUB connector.
-
Product
F87517T180N135
1000628
-
The F87517T180N135 Switch Probe, designated by the order code 1000628, is a prime example of advanced engineering in contact probes. This model is categorized under the F875-NO family and operates as a normally open (NO) switch probe, making it ideal for a variety of applications. It boasts a compact design with a pitch of 2.54 mm, operating efficiently in a temperature range from -45°C to +100°C. With its lightweight construction and robust mechanical specifications, the probe can handle continuous currents up to 5 A while maintaining a typical contact resistance of only 20 mOhm.
-
Product
F10062S090L200L
1172586
-
The F10062S090L200L is a versatile basic contact probe designed for high-performance applications. It features a pitch of 2.54 mm, accommodating a variety of connection needs. With a temperature range from -45°C to +80°C, this probe is suitable for diverse industrial environments. The model stands out due to its robust design and precise engineering, ensuring reliability in demanding conditions.
-
Product
NI-9871, 4-Port, RS485/RS422 C Series Serial Interface Module
779892-03
Serial Interface
The NI‑9871 adds RS485/RS422 serial ports to CompactRIO systems. The serial ports are accessed directly from the FPGA to offer you flexibility in communicating with serial devices. The module has individual buffers on every port that save FPGA space and simplify programming. The NI‑9871 supports standard start bit, stop bit, and handshaking settings. It uses an external power to provide maximum compatibility and reliability under all serial port conditions.
-
Product
Step Probes (F732SP) F73211B0082G300SP
1000933
-
Introducing the Step Probes (F732SP) F73211B0082G300SP, a precision measurement solution engineered for reliability in demanding environments. With a pitch of 2.54 mm and an operating temperature range from -45°C to +100°C, these probes are designed to handle various applications that require robust performance. The Step Probes feature a reliable continuous current capacity of 5A, ensuring excellent electrical conductivity while maintaining a typical contact resistance of merely 20 mOhm. This combination of thermal resilience and electrical efficiency makes them ideal for high-performance testing and connection tasks.
-
Product
Emulates AT89C5121 Derivatives with 6/12 Clocks/Cycle
FE-5121
-
* Emulates AT89C5121 Derivatives with 6/12 Clocks/Cycle * 16K Code Memory * Software Trace * Real-Time Emulation * Frequency up to 16MHz/ 3V, 5V * X1 and X2 Mode Support * MS-Windows Debugger for C and Assembler * Keil mVision2 Debugger Compatible * PLCC-52 and SSOP-24 Emulation Headers * Serially Linked to PC at 115Kbaud
-
Product
Digital Infrared Thermometer
IR-710
-
Shenzhen Calibeur Industries Co., Ltd..
'- Non-Contact Infrared Thermometer With Laser Targeting '- Range: -38° C to +520° C/-36.4° F to +968° F'- Accuracy : < 0°C： ±3% or ± 3°C ≥0°C： ±2% or ±2°C'- Distance spot ratio (D:S) : 8:1'- ℃/℉ exchange,'- Size: 180x80x40mm'- Weight: 120g'- Power: AAA1.5V 2pcs (not included)
-
Product
Sound Level Calibrator
511E
-
Accepted internationally 1 kHz represents the "0 dB" reference point of A, B, C Weighting and other filters utilized in acoustic measurement. The Pistonphone - a mechanical sound source - offers a slightly higher degree of accuracy at a substantial increase in cost. In addition, the 200 or 250 Hz operating frequency is mechanically limited and not suited for measurements of filtered inputs. The 0.2 dB accuracy is quickly lost in the 0.7 to 1.5 dB tolerances acceptable for weighting filters at frequencies around 250 Hz.
-
Product
NI-9202, ±10 V, 10 kS/s, 24-Bit, 16-Channel C Series Voltage Input Module
784400-01
Voltage Input Module
±10 V, 10 kS/s, 24-Bit, 16-Channel C Series Voltage Input Module - The NI-9202 has excellent flexibility to meet the needs of your applications. The module has 16 simultaneous sampling, differential input channels to create large, distributed systems in a rugged form factor. It also has configurable filters to eliminate noise in your system while maintaining low-latency to be used in control systems.
-
Product
Waveguide Electromechanical Relay Switches C, X, Ku, K & Ka Bands up to 40 GHz
-
Waveguide Electromechanical Switch models cover C, X, Ku, K, Ka frequency bands up to 40 GHz. SPDT and Optional DPDT* Configurations with Latching Self Cut-Off Actuators, TTL Logic, and Position Indictors with manual override. Patented Motor Drive with Arc Suppression. Designs support WR-137, WR-112, WR-90, WR-75, WR-62, WR-42, and WR-28 waveguide sizes with O Rings for pressurized operation. Power handling capability up to 12 kW CW and 320 kW Peak. These waveguide electromechanical relay switches deliver desirable performance that includes high isolation levels up to 105 dB, and extremely low insertion loss down to 0.01 dB.
-
Product
sbRIO-9235, Non-Enclosed, 10 kS/s/channel, 120 Ω Quarter-Bridge Strain Gage, 8-Channel C Series Strain/Bridge Input Module
781579-01
Strain/Bridge Input Module
Non-Enclosed, 10 kS/s/channel, 120 Ω Quarter-Bridge Strain Gage, 8-Channel C Series Strain/Bridge Input Module - The sbRIO‑9235 measures dynamic strain on all channels simultaneously, allowing for synchronized, high-speed measurements. This capability is important for applications, such as impact tests, that require comparison across many channels at a particular instant in time. The sbRIO‑9235 includes built-in voltage excitation for quarter-bridge sensors. It also has 60 VDC isolation and 1,000 Vrms transient isolation, providing high‑common‑mode noise rejection and increased safety. Non-enclosed modules are designed for OEM applications.
-
Product
Thermometer REPLACED BY PTM-1
BA T-7001H
-
In applications where clinical accuracy is not mandatory and cost is a consideration , the BAT-7001H is Physitemp‘s most compact, low cost thermocouple thermometer. The Model BAT-7001H is a high performance, precision hand-held instrument for the measurement of temperature using Type T (copper-constantan) thermocouples. This versatile instrument measures temperature in both °C and °F. The internal memory of the micro-computer stores the minimum and maximum measured temperature for instant recall via the LCD display. BAT-7001H operates on a 9V battery.
-
Product
EN50155 Managed Ethernet Switch
EKI-9516E-4GMW
-
12 x M12 D-Coded 10/100 Mbps ports + 4 x M12 X-Coded 10/100/1000 Mbps Byapss ports, Complies with EN50155 & EN50121-3-2, Operating temperature: -40 ~ 75°C.
-
Product
Step Probes (F732SP) F73211B1041G150SP
1008914
-
The Step Probes (F732SP) F73211B1041G150SP are engineered for precision and reliability, boasting a variety of robust features designed to cater to the most demanding applications. With a pitch measurement of 2.54 mm (100 mil), these probes can operate in temperatures ranging from -45°C to +100°C, making them suitable for diverse environments. The design ensures that the probes maintain an impressive pointing accuracy of +/- 0.08 mm, while the mechanical specifications include a preload of 60 cN and a spring force of 150 cN, allowing for optimal performance during operational use.
-
Product
COM Express Type 6 Compact Module With 8th Gen Intel® Core™ & Celeron® Processor
CEM521
-
The CEM521 is powered by the latest 8th generation Intel® Core™ i7/i5/i3 processor or Intel® Celeron® processor 4305UE (codename: Whiskey Lake-U). It is suitable for harsh operating conditions with an extended operating temperature range of -40°C to +85°C (-40°F to +185°F). The 4K-ready system on module was designed for graphics-intensive Industrial IoT applications including industrial control system, medical imaging, digital signage, gaming machines, military, and networking. The palm-sized CEM521 is packed with a variety of rich features including low power consumption, industrial temperature support and high graphic processing capability. The COM Express Type 6 compact module supports two DDR4-2400 SO-DIMM sockets for up to 64GB of system memory. The power-efficient CEM521 is also integrated with Intel® Gen 9 graphics and supported with DX12.0, OCL 2.0 and OGL 4.3 for excellent graphics performance with a resolution of up to 4K (4096 x 2160 @ 30 Hz). It offers three independent display support through one LVDS, one VGA and one DDI ports for HDMI/DisplayPort.
-
Product
M-Module Carrier for CompactPCI (3U)
i3000
-
The i3000 M-module Carrier for CompactPCI features a 3U form factor CompactPCI gateway to the M-module interface. One M-module mounting socket is provided by this carrier. This carrier can be used in temperatures from -40°/+85°C. The M-module interface of the i3000 complies to the M-module Specification ANSI/VITA 12-1996. The interface features A8, A24, D16 and D32 access types.
-
Product
96/48/24-CH Opto-22 Compatible Digital I/O PCI Cards
PCI-7296/7248/7224
Digital I/O Module
ADLINK"s PCI-7296/7248/7224 are high-density parallel digital I/O boards with 96/48/24 I/O channels. The header connectors are fully compatible with industry Opto-22 standard. Thus, PCI-7296/48/24 can utilize the Opto-22 external devices. The PCI-7296/7248/7224 devices emulate mode 0 of the industry standard 8255 programmable peripheral interface (PPI) chips. The PCI-7296/7248/7224 provides 4/2/1 PPI chips respectively. Each PPI offers three 8-bit ports: Port A, Port B and Port C. The Port C is divided into 2 nibble-wide (4-bit) ports. The PCI-7296/7248/7224 devices have programmable timer/counters. One 16-bit counter is available for event counting, while the other 32-bit timer is available for timed interrupt generation. The PCI-7296/7248/7224 devices provide multiple programmable interrupt sources from DIO channels, as well as the output of the timer.
-
Product
Matrix Fiber Optical Switch at Single Mode Type A 1550nm with LC/PC Connector
GLSUN-MEMS-8x8
-
Guilin GLsun Science and Tech Group Co., LTD
Fiber Configurations8x8 portsFiber TypeSM, 9/125 umTest Wavelength1530/1570 nmOperating Voltage4.8~5.5VSwitch TypeNon-latchingFiber Length0.5m±5cmConnectorLC/PCTube Type900 umOperating Temperature-10°C~ +70°CStorge Temperature-40°C ~ +85°C
-
Product
sbRIO-9229 , Non-Enclosed, ±60 V, 50 kS/s/ch, 24-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module
780874-01
Voltage Input Module
Non-Enclosed, ±60 V, 50 kS/s/ch, 24-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module - The sbRIO‑9229 performs differential analog input. The sbRIO‑9229 is an effective general-purpose analog module because of its resolution, sample rate, and input range. With channel‑to‑channel isolation, your entire system, including the device under test, is protected from harmful voltage spikes up to the isolation rating. In addition to safety, isolation eliminates measurement errors caused by ground loops because the front end of the module is floating. Non-enclosed modules are designed for OEM applications.
-
Product
I/O Expanders and Level Translators
-
ST’s Xpander family of general-purpose input/output port expanders are used to interface digital ASICs via a two-line bidirectional bus (I²C) . ST’s dual-supply level translators are used as interface between multi-voltage chipsets and system I/Os, ranging from 5.5 V down to 1.2 V.
-
Product
Alternate 2.82 (80.00) - 5.00 (141.00) General Purpose Probe
HPA-74E-1
General Purpose Probe
Current Rating (Amps): 3Average Probe Resistance (mOhm): 35Test Center (mil): 100Test Center (mm): 2.54Test Center Remark: max. test center 187 mil / 4,74 mmFull Travel (mil): 100Full Travel (mm): 2.54Recommended Travel (mil): 75Recommended Travel (mm): 1.91Mechanical Life (no of cyles): 2,000,000Overall Length (mil): 598Overall Length (mm): 15.19Overall Length Remark: Tip “A-B”: 598 (mil), 15.19 (mil), Tip “C”: 586 (mil), 14.88 (mil), Tip “E, T135, T156, T65, T80”: 610 (mil), 15.49 (mil), Tip “T75”: 620 (mil), 15.75 (mil)
-
Product
Basic Contact Probes (100 Mil) F10014S150P200HP
1142392
-
The Basic Contact Probes (100 mil) F10014S150P200HP, with SKU 1142392, represent a crucial component for various electrical applications. Engineered to thrive within a temperature range of -45°C to +80°C, these probes ensure reliability and performance under diverse conditions. Featuring a pitch of 2.54 mm (100 mil), they facilitate precision in applications that require meticulous electrical connections. The continuous current rating of 5.00 A paired with a typical contact resistance of 40.00 mOhm makes them ideal for achieving consistent signal integrity.
-
Product
Compact Fanless AMR/MMR Controller System With 12th/13th/14th Gen Intel® Core™ I CPU Socket (LGA 1700)
MIC-760
Controller
High-performance computing powered by Intel® 12th/13th/14th Gen Core™ i CPUFanless design ensures reliable operation in environments up to 60°CIsolated DIO, CANbus and Serial ports guarantee for industrial communicationContact 8KV/Air 15KV IV level ESD protection , ClassB for EMI design, best choice for industrial environment3 Ethernet and 4 USB3.2 (5Gbps) for Camera and Lidar connectionIndustrial WiFi design enables fast roaming at 36msCompact size ensures easy installation for AMR/MMRBuilt on Ubuntu 22.04 and Advantech Edge Linux, with ROS2 package readinessROS2 package enhances industrial automation capabilities including EtherCAT and Modbus node support
-
Product
Basic Contact Probe F58828B150G300
1007402
-
The Basic Contact Probes (100 mil) F58828B150G300 are meticulously engineered for precision and reliability in various electrical applications. These probes are designed with a pitch of 2.54 mm, making them ideal for fine contact scenarios. With an impressive temperature range from -45°C to +80°C, they are suited for both extreme cold and heat conditions. The product showcases not only durability but also excellent electrical performance, supporting continuous current ratings of up to 5.00 A and a typical contact resistance of merely 30 mOhm, ensuring efficient conductivity and minimal signal loss.
-
Product
Basic Contact Probes (100 Mil) F10014S150P300HP
1001170
-
The Basic Contact Probes (100 mil) F10014S150P300HP are precision-engineered components designed to ensure reliable electrical connections in a variety of applications, from testing to automation solutions. Featuring a robust design optimized for performance, these probes maintain a compact profile with a total length of 33.30 mm and a projection height of 8.40 mm. They operate within a temperature range of -45°C to +80°C and are built to withstand continuous currents of up to 5.00A, making them suitable for diverse environments and applications where reliable conductivity is critical.
-
Product
Basic Contact Probes F08602B110G130
1032963
-
The Basic Contact Probes F08602B110G130 are engineered for precision and durability in various demanding applications. These probes boast a design featuring a pitch of 1.27 mm and a robust operating temperature range of -45°C to +100°C, making them suitable for a variety of electrical and mechanical tasks. The components of the probes are crafted with high-quality materials, including a beryllium copper plunger plated with gold for enhanced conductivity, and a bronze barrel also plated with gold, ensuring optimal performance and minimal wear over time.
