Product

Portable System for High-Voltage Solid Dielectrics Testing

HVT-70/50

-

Kharkovenergopribor Ltd.

HVT-70/50 - Kharkovenergopribor Ltd.

Portable system HVT-70/50 is designed for carrying out high-voltage withstand testing of cable insulation and other solid dielectrics with DC (rectified) voltage up to 70 kV and AC voltage up to 50 kV RMS at industrial frequency (f = 50 Hz).

Product

Cable Test Van

ETL-35

-

Kharkovenergopribor Ltd.

ETL-35 - Kharkovenergopribor Ltd.

ETL-35 is a cable test van designed for testing electrical substation equipment.Apart from cable insulation withstand testing with DC (rectified) voltage up to 60 kV and ability to measure very small leakage currents, the system can be used for testing various objects with small electrical capacitance with AC voltage of up to 100 kV and measuring dielectric dissipation factor (Tan Delta) at industrial frequency.

Product

Omniblock Integrated X-Ray Systems

-

Excelitas Technologies Corp.

Excelitas Technologies Corp.

Omniblock® X-ray generators from Excelitas Technologies integrate the high-voltage source and X-ray tube into one consolidated housing. This design configuration eliminates the high-voltage cables and connectors reducing cost while improving system design flexibility and streamlining integration. They are specifically designed for generating X-rays in static or rotating applications using proven designs of up to 180 kV and 2.4 kW. Typical applications for Omniblock X-ray generators include baggage screening, medical imaging, food inspection, industrial analysis and many other cost-sensitive and space-constrained X-ray applications.

Product

Voltmeter

MV-731A DC

-

Millivac Instruments

MV-731A DC - Millivac Instruments

DC VOLTMETERS. DC KV Meter. 4.5 Digit Readout

Product

High Voltage Power Supply

PS300

-

Stanford Research Systems, Inc.

PS300 - Stanford Research Systems, Inc.

The PS300 High Voltage Power Supply series consists of three efficient, microprocessor-controlled, switching DC power supplies capable of delivering 25 W of output power at voltages up to 5 kV.

Product

1kV, 120 MHz High Voltage Differential Probe Without Tip Accessories and with Auto Zero Disconnect

HVD3106A-NOACC

-

Teledyne LeCroy

HVD3106A-NOACC - Teledyne LeCroy

The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.

Product

10 KV High-Voltage Oscilloscope Probe, CTUVus Listed

CT4432

-

Cal Test Electronics

CT4432 - Cal Test Electronics

Because an oscilloscope has limits to the input voltage it can accept, measuring higher voltages may sometimes require the use of an attenuating high-voltage probe. The CT4432, with an improved dual-resistor design, can accurately and safely step-down higher voltages to an acceptable level.

Product

Insulation Resistance Measurement

MI20KVe

-

Scope T&M Pvt, Ltd.

MI20KVe - Scope T&M Pvt, Ltd.

The MI-20KVe High-Voltage insulation tester is a truly portable device that allows the measurement of insulation resistances using test voltages up to 20 kV.

Product

USB Isolators

-

Analog Devices Inc.

Analog Devices Inc.

USB isolators protect the communication interface between the host, such as a PC, and its peripheral. Utilizing iCoupler® digital isolation technology, Analog Devices offers USB 2.0 compliant SOIC components with data rates up to 12 Mbps that provide EMC protection and safety isolation, reduce design size and time, and lower system cost. Galvanically isolated USB μModule® (micromodule) transceivers integrate the USB interface with an isolated dc-to-dc converter for up to 2.5 W of isolated power and provide ±15 kV ESD. Whether for host, hub, bus splitter, or peripheral device, these transparent USB digital isolators are easy to use—they just work—all while meeting the demanding standards required for medical and industrial applications.

Product

Microprocessor Multifunction TRMS Power Meter + Harmonics Analyzer

8100 C

-

Kusam Electrical Industries Limited

8100 C - Kusam Electrical Industries Limited

INPUT :• Input Voltage Range :Voltage: 55 ~ 300V AC, or 300 ~ 600V AC, 45 ~ 65Hz.P.T. Ratio Programmable upto 9999 / KV.• Input Voltage Over Range :Voltage : 200 % Continuous, 300 % of rating for 10 sec.• Input Current Range :Current : 110 % of rating. 0-1A or 0 - 5AC.T. Ratio programmable upto 9999 / 5A.Input Current Over Range:Current : 400 % Continuous, 2000 % of rating for 10 Sec.• Input Frequency : 45 Hz ~ 70 Hz.• Input Burden :Voltage 0.25 VA / Unit, Current 0.25VA / Unit, at 50 / 60HzOUTPUTDC Current: 0 20 m A DCLoad resistance drive: output drive 10 V DC maximum.DC Voltage: 0 -10 V DCLoad resistance drive: output drive 5mA maximumOutput Protection: No damage even if output is Open or Short Circuit.Output Response Time : £ 1 Sec.Digital Output : RS485 Output, Isolate Type with MODBUS RTU mode., 4800, 9600,19200Baud Rate, User Selectable.

Product

Surge Voltage Generator

SSG 3000

-

BAUR

SSG 3000 - BAUR

Cable fault location with the BAUR SSG 3000. Surge voltage generators are used for pre-location and pinpointing of high- and low-resistive as well as intermittent faults in power cables. The energy stored in a high-voltage capacitor is released at regular intervals or as DC voltage. The thus generated acoustic signal at the fault position can be recorded with a ground microphone and a universal receiver.* High surge voltage up to 32 kV* Continuously adjustable voltage* Voltage monitoring through kV meters with 3 measuring ranges* high surge energy in each voltage range

Product

Universal Multichannel System up to 3.5 kV

-

CAEN S.p.A.

CAEN S.p.A.

- From 12 to 48 independently controllable High Voltage channels- 0 ÷ 3.5 kV output voltage- Maximum Current 3.5 mA- Either Radiall Multipin or SHV connectors- Available with either positive or negative polarity- Up to 10 nA / 500 pA current set / monitor resolution- Up to 5 mV voltage set / monitor resolution- Very Low ripple, down to < 5 mVpp- 2 different channel grounding - Common Ground (AGxxxx) - Common Floating Return (Axxxx)- Independently programmable for each channel: - Output voltage - Current limit - Ramp up/down - TRIP parameter- Current generator operation in over current condition- Specific design for High Altitudes 0÷5000 m (A7030 only)

Product

Beam Directional Power Supply Mains 60 To 180 kV

SiteX D1802

-

Teledyne ICM

SiteX D1802 - Teledyne ICM

Our SITEX and SITEXS are capable of the direct and accurate measurement of high voltage. This essential information enables the control system to guarantee the stability and reproducibility of the radiological parameters based on true high voltage, ensuring extremely precise measurements-based utilization.

Product

CT-ALPHA Nanotube

-

ProCon X-Ray GmbH

ProCon X-Ray GmbH

One main component of the system is Excillum’s high perfor­mance X‑ray source NanoTube N2, a up to 110 kV X‑ray tube with latest tungsten-diamond trans­mis­sion target techno­logy, automatic e‑beam focusing and astig­ma­tism correc­tion, ensuring that the smallest possible, truly round X‑ray spot is achieved.

Product

Industrial Computed Tomography

TomoScope® XL

-

Werth Inc.

TomoScope® XL - Werth Inc.

Micro focus X-ray source up to 225 kV (option: 300 kV micro focus tube) Grater range of x-ray detectors Grater range of x-ray detectors

Product

Oil Breakdown Voltage Tester

DTA 100 C

-

BAUR

DTA 100 C - BAUR

Insulating oil testing with the BAUR DTA 100 C. The BAUR DTA 100 C oil tester is designed for continuous operation in the laboratory and is characterised by the combination of extraordinary features. As a high-performance device with a test voltage up to 100 kV, with clear breakdown detection and absolutely reliable measurement results even across several measurement sequences, the BAUR DTA 100 C is the leading testing device for users in the electricity and other industries and in testing institutes.

Product

Power Products

-

LXinstruments GmbH

LXinstruments GmbH

With the advancing development and expansion of renewable energies, modern electrical equipment must be developed, manufactured and tested according to nationally as well as internationally valid standards. This requires powerful power supplies & test equipment.Thanks to our extensive product portfolio with the full range of devices, we are able to cover all relevant areas of application. Our range includes standardised desktop units for single workstations up to individually and customised modified special solutions in 19” racks in the megawatt range with voltages up to 2.25 kV.

Product

Surge Voltage Generator

SSG 500

-

BAUR

SSG 500 - BAUR

Cable fault location with the BAUR SSG 500. The SSG 500 surge voltage generator is arranged in a 19'' housing. Maximum safety is achieved with the electrical safety control unit, the automatic discharge unit, the fully enclosed design and separate protection and system earth.* 6 output voltages up to max. 16 kV available* Electromagnetically actuated surge switch* Preselectable surge energy: 288 / 512 Ws (in all voltage ranges)* Automatic discharge unit

Product

Silicon Drift Detector

Octane Elite (SDD) Series

-

EDAX

Octane Elite (SDD) Series - EDAX

The game changing advancements in the Octane Elite Silicon Drift Detector (SDD) Series take detector technology to the next level. This line of detectors incorporates a new silicon nitride (Si3N4) window, which offers remarkable improvements in low energy sensitivity for light element detection and low kV microanalysis. The Octane Elite Series also uses the widely praised CUBE technology, which yields high speed X-ray data processing within a smaller and fully vacuum encapsulated detector device.

Product

Insulation Tester

1555

-

Fluke Corporation

1555 - Fluke Corporation

The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making it ideal for testing high voltage equipment including switchgear, motors, generators and cables.

Product

Vacuum Bottle Tester

VBT-75P S2

-

Manta Test Systems

VBT-75P S2 - Manta Test Systems

The VBT-75P S2 is Vanguard’s second generation microprocessor-based, portable 75 kV dc vacuum bottle tester. This lightweight, portable tester is designed for testing circuit-breaker vacuum bottles in the field and at the shop.

Product

PCI Bus Analog Output Board, 4 Isolated Outputs, 14 Bit

APCI-3501-4

-

TEAM SOLUTIONS, INC.

APCI-3501-4 - TEAM SOLUTIONS, INC.

4 analog output channels Optical isolation 500 V Settling time 30 µs typ. 14-bit resolution (13 bit for 0-10 V) Output voltage: ±10 V, 0-10 V (switchable through software) Output voltage after reset: 0 V Each output channel has its own ground line (without optical isolation from the others) Driver capacity: 5 mA/500 pF Short-circuit protection, EMI filters Noise neutralization of the PC supply Creeping distance: 3.2 mm acc. to DIN VDE 0411-100 Watchdog for resetting the analog output channels (4 different time units: µs, ms, s, min) or as 12-bit timer (with interrupt possibility), when the watchdog function is not necessary2 digital input channels, 24 V, isolated 2 digital output channels, 24 V, isolated Noise immunity Test level: ESD: 4 kV Fields: 10 V/m Burst: 4 kV Cond. radio interferences: 10 V

Product

Bench Digital Multimeter, 40000 Count, True RMS, Auto, Manual Range, 1 kV, 10 A, 4.75 Digit

72-1020

-

Tenma

72-1020 - Tenma

This unit measures AC/DC voltage and current, resistance, capacitance, frequency, and temperature. It also provides diode and audible continuity test, as well as 4~20mA loop testing.