Positioning
Aligning test set with target geography.
-
Product
NI-9264, 25 kS/s/ch Simultaneous, ±10 V, 16-Channel C Series Voltage Output Module
785190-02
Voltage Output Module
25 kS/s/ch Simultaneous, ±10 V, 16-Channel C Series Voltage Output Module - The NI‑9264 is a simultaneously updating analog output module that accommodates higher‑channel‑count systems. Higher density modules conserve chassis space, which leaves room for other measurement types. Each channel has its own digital‑to‑analog converter. The spring-terminal version of the NI‑9264 uses a 36‑position connector for the output channels, and each channel has a ground connection.
-
Product
Rotary Position Sensors
-
Using the same technology as our linear range but with a printed rotary coil opposed to the wound linear coil our rotary sensors offer the same high performance as the linear sensor range but with shaft driven rotary or gravity driven tilt measurement. The standard P500/P502 rotary sensors can be manufactured with a measurement range anywhere between 5 and 160. We also manufacture miniature rotary sensors such as the P501 and P505 and the P503 flat PCB style version for customer application fitment. Like our linear sensor range our rotary sensors are also customisable should the standard range not accomodate your application.
-
Product
Linear Position Sensors
-
Positek linear sensors use our own patented inductive sensing technology packaged in very durable housings. With a comprehensive range measuring from 1mm to 800mm and most products available with intrinsically safe approval. Hydraulic and pneumatic cylinder applications can be satisfied either with the P100 style cylinder sensor, the internally mounted P106 linear sensor or any of our other externally mounted linear sensors such as the stand alone P101. For submerged applications we offer IP68 sealing to 10 bar from our S114 and S115 submersible linear sensors and 350bar from our S125. The complete range of linear sensors is very customisable with many mounting, electrical and connection options. Customisation of most of our Linear, Rotary and Rilt sensors is routine given the excellent flexibilty of our sensing technology.
-
Product
Piezo-based Nano Drives
attoMOTION
-
attocube’s business unit attoMOTION focuses on the design, engineering and manufacturing of piezo-driven motors and positioning solutions for applications with the highest requirements on precision. Due to their unrivaled accuracy, the compact drive units achieve the most challenging positioning tasks in cutting edge research applications, as well as in industrial fields such as precision machining where they are successfully utilized for the nano precise alignment of optical and mechanical components.
-
Product
Receiver, S6, 6 Module, With 15" Platform, For Slide Mount (slide Kit Required)
310122101
Receiver
The S6 Receiver is designed to mount to slides in a rack application or directly to a tabletop. It features positive-latching mechanisms and integrated guide pins to create a highly reliable engagement system. The S6 Receiver is very versatile and has module positions screened on top for ease of module placement.
-
Product
20"D Retractable Writing Shelf for 24" Racks
WS-022420
-
24" x 20"D retractable writing shelf operates smoothly on ball bearing slides which lock in fully extended position.
-
Product
Module Production
-
JRT Photovoltaics GmbH & Co. KG
Individual lithium-ion cells are connected in series to a module. Jonas & Redmann offer assembly platforms for the precise positioning and secure fixing of battery cells to one another in a module.
-
Product
Atomic Force Microscope
AFM
-
Atomic Force Microscopes are the most widely used SPM microscopes. They can be applied in fields that span from surface science, semiconductor technology, magnetic media, polymer science, optics to biology, chemistry and medicine.Absolute positioning with an accuracy of 2 nm.
-
Product
Stationary Drive Test System
ACTAS CF80
-
Stationary test system for sequential final factory tests and function tests on up to 8 drives. The drive test system is operated and controlled with the ACTAS operating software. The test position is selected using the multiplex method. The test system can reproduce drive control with the aid of a logic module. This makes it possible to test any drive even if there is no control unit.
-
Product
Compact Ultrasonic Testing Device
SONAPHONE® Pocket
-
With the SONAPHONE Pocket you identify problems even before they arise and create value at all levels of your company. Just by detecting and eliminating leaks you can reduce the energy costs for your compressed air system up to 30 percent. This also has positive effects on your operational safety and system productivity through early warning of bearing failure and evidence of partial electrical discharges.
-
Product
Halo Automatic Testing System
-
Our revolutionary Halo system is an automatic metal detector testing device. It is designed to automatically test ferrous, non-ferrous and stainless steel samples on all Fortress metal detectors. Automatic testing saves time, money, labor, along with removing the risk of human error and work place injury at critical control points on a manufacturing line while complying with industry standards. The Halo system is ideal for applications where manual testing of a metal detector is made difficult due to access, position, access to the product flow, environmental conditions, etc.
-
Product
Rotary Encoders / Angle Sensors
-
Measuring and monitoring of rotary speed and rotary shaft positions at machines, installations and electrical drives
-
Product
Touch Posi-Control System V2
DPC
-
The position control torque arm system helps manufacturers detect and eliminate costly screw-fastening errors during the assembly process. This position control system is designed to reduce the risk of improperly fastened screws, ensuring that every screw is in the correctly tightened in the correct sequence. A good tightening sequence ensures that an even preload distribution is achieved in the joint. Using a position control system is like putting the eyes and ears of a quality control manager where they are needed most - right on the assembly area.
-
Product
Mini Coax, Module, Receiver, 90 Series, 76 Position
510104150
Receiver Module
Primary mating module 510108132. (May mate with other ITA modules, as well.)
-
Product
Mounting Panel, I2 Micro ICon, 6U, 6 Positions, With Slide Mounting (slide Kit Required)
310113586
Mounting Panel
Mounting Panel, i2 Micro iCon, 6U, 6 Positions, with Slide Mounting (slide kit required)
-
Product
Data-logger
11250
-
Comes loaded with M. C. Miller's Test Site Survey application• Integrates with ProActive, M. C. Miller's corrosion control data management application• Data-types are customizable for each of your test sites and each test site can be GPS position stamped • High-resolution date/time stamped photos can be taken at your test sites during a route and recorded images are posted directly to the ProActive database • Sub-meter GPS position resolution
-
-
Product
Signal, Module, Receiver, QuadraPaddle, 90 Series, 192 Position, Fully Loaded with Twin Female Contacts and Round Posts (610138200 and 610138117)
510150137
Receiver Module
Primary mating module 510151105. (May mate with other ITA modules, as well.)
-
Product
Structural Adhesive Bead Inspection
Predator3D
-
The Predator3D bead inspection technology measures bead height, width (volume) and position to assure structural integrity. It also alerts users to skips and partial skips, where material is deposited with insufficient volume.
-
Product
SS7 Gateway
-
An SS7 media gateway is a networking device positioned within a carrier core network to provide protocol translations between traditional telephony signaling and modern voice-over-IP signaling (H.323 or SIP (session initiation protocol).
-
Product
Equalizer
-
Chengdu KeyLink Microwave Technology Co., Ltd.
The series of products are mainly designed to complement the original system transmission characteristics of the curve.The frequency range covered by 0.5GHz~40GHz.Its characteristic curve can be designed into two types: positive and negative slope.The products have the characteristics of small size and high reliability.The products can be applied to all kinds of receiving and transmitting channels,high power traveling wave tubes, solid state power amplifiers, etc. KeyLink's equalizers can be categorized as follows.
-
Product
PCB Adapter, ITA, TriPaddle, 96 Position, To PCB-Mounted 1x96 Male DIN 41612 Connector
510108148
PCB Adapter
The 96 Pin ITA Signal Module is made from Ryton R-7, withstanding temperatures up to 220°C. Nomenclature is molded on the Module.
-
Product
Light Analysis
-
Welcome to Thorlabs; below you will find links to detectors and instrumentation that measure the various properties of light, a subset of our entire line of photonics products. Thorlabs offers an extensive selection of instruments that measure the properties of light. Our versatile power and energy meters can be used with over 25 different sensors in order to make NIST-traceable power and energy measurements. If the convenience of a meter is not desired, our selection of detectors includes basic photodiodes (uncalibrated and calibrated), photodetectors (biased, amplified, and avalanche), CCD and CMOS arrays, position detectors, integrating spheres, and photomultiplier tubes. The Beam Characterization category contains beam profilers (camera and scanning slit), a wavefront sensor, spectrometers, and interferometers, while the Polarimetery link leads to a selection of instruments used to measure and control the polarization of light.
-
Product
VTAC Patchcord, Receiver, 36", VTAC, 2x 1000Base-T1 UTP Wire 1 Port MateNet, 1 Position
7-142716763-036
VTAC Patchcord
VTAC Patchcord, Receiver, 36", VTAC, 2x 1000Base-T1 UTP wire 1 Port MateNet, 1 Position.
-
Product
Multi-axis Motion Systems
-
Haydon Kerk offers pre-engineered and customizable solutions for multi-axis positioning requirements, leveraging our core actuator and linear rail technologies to deliver optimized system performance. Our integrated solutions solve the motion application challenges for technology driven original equipment manufacturers (OEMs) around the globe.
-
Product
Low Voltage DC / Battery Powered High Voltage Amplifiers
WMA-005 And WMA-005LF
-
The Falco Systems WMA-005 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 3mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-005LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.1mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.
-
Product
Highly Accurate And Robust LBL Acoustic Positioning Systems
-
PinPoint LBL acoustic positioning systems utilize the same core Broadband Acoustic Spread Spectrum technology used in LinkQuest's other industry leading acoustic communication and positioning products. The PinPoint systems use sophisticated and proven acoustic ranging techniques simplified from the PMGS/HPMGS systems with accuracy of better than 0.5 cm. LinkQuest LBL systems are integrated with the high speed acoustic modems and TrackLink USBL tracking systems.
-
Product
Single Piston Reciprocating Pumps
ReaXus M1 Class
-
The compact M1 Class HPLC Pump consists of single-headed, positive displacement piston pumps that deliver high-performance and precision at an affordable price. Superior to Gear, Diaphragm, and Peristaltic pumps, the M1Class provides greater performance at an equivalent cost to lesser functioning products.Applications include precise chemical metering, dispensing, and specific HPLC separations. Standard fluid path materials are Stainless Steel. With 10 mL/min, 40 mL/min, and 100 mL/min versions, reaching pressures up to 2,500 psi, these pumps capture the majority of typical laboratory fluid transfer applications.Features include interactive keypad control, Pulse Dampener and Outlet Filter, RS-232 Serial and Micro USB 2.0 ports for complete PC control and status, as well as hardware for laboratory stand mounting. Having the smallest possible footprint for a high pressure pump, the M1 Class will easily integrate into any laboratory or industrial environment.
-
Product
PCI Counter/Timer with Quadrature Board
APC484
-
Several models with a variety of configurations provide up to ten counter/timer channels for counting events, generating waveform control signals, measuring pulse-widths, periodic rates, or quadrature position and monitoring operations.
-
Product
High-Dynamics PIMag Linear Stage
V-522 • V-524 • V-528
-
Physik Instrumente GmbH & Co. KG
Reference-class linear stage. Linear positioning stages with magnetic direct drives largely dispense with mechanical components in the drivetrain and the drive force acts directly on the motion platform. Together with precision bearings, a high travel accuracy and longer lifetime is achieved. The linear positioning stages are particularly suitable for scanning applications. PIMag® Voice Coil. Voice coil drives consist of 2 essential components: A permanent magnet and a coil, which is located in the air gap of the magnetic field. When current flows through the coil, it moves in the magnetic field of the permanent magnet. The direction of motion depends on the polarity. Thanks to their low weight and friction-free drive principle, voice coil drives are particularly suitable for applications, which require high dynamics and high velocities at limited travel ranges. High scan frequencies and precision positioning are also possible with these drives, because they are free of the effects of hysteresis.
