Product

Ultra High 2.84 (81.00) - 10.00 (283.00) High Performance Lead Free Probe

LFRE-1I35-10

-

ECT

LFRE-1I35-10 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

(Automatic Redundant Battery Selector With Source Control And Monitoring)

ARBS 2600

-

La Marche Manufacturing Company

ARBS 2600 - La Marche Manufacturing Company

Our product is designed with high powered diodes to select the higher voltage of the two isolated DC power sources. The ARBS selects power from the best available battery while isolating the alternate battery bank. The special heat sink diode assembly is manufactured to handle high output requirements with safety margin to spare.

Product

The Leading Measurement System for the Analysis of Porous Materials

ELWIS

-

Autoneum Holding AG

ELWIS - Autoneum Holding AG

ELWIS (Evaluation of Light Weight Impedance System) offers a full and rapid characterization of porous materials based on the analysis of a single sample. The ELWIS system consists of the ELWIS-A and ELWIS-S components which can be used independently from each other although both applications are needed for a complete material simulation.ELWIS-A measures acoustic parameters that are needed to evaluate the acoustic performance of sound insulation and sound-absorbing multi-layer materials. An additional impedance tube for absorption measurements at higher frequencies is available for ELWIS-A.ELWIS-S measures structural parameters that are needed to simulate the dynamic and acoustic behavior of sound packages in the medium to low frequency range (including the "Poisson Ratio" for foam materials).ELWIS is very easy to operate: Thanks to its user-friendly software, the system can also be used to obtain reliable results by users with only limited experience in the characterization of porous materials.

Product

Battery Impedance Tester

-

Weshine Electric Manufacturing Co., Ltd

Weshine Electric Manufacturing Co., Ltd

The DC test method is adopted to simulate the actual use of the battery in a real and objective way, which can effectively eliminate the hidden dangers such as deficiency, deficiency and connection failure between batteries while measuring the internal resistance of the battery.

Product

Alternate 2.39 (68.00) - 6.00 (170.00) High Performance Lead Free Probe

LFRE-1H-6

-

ECT

LFRE-1H-6 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Bipolar DC Power Supply / Battery Simulator

IT6400 Series

-

I-TECH Electronic Co., Ltd

IT6400 Series - I-TECH Electronic Co., Ltd

The unique bipolar voltage/current output makes IT6400 series can be used as a bipolar power source or a bipolar electronic load. The battery simulating function is especially applicable for development and high speed production testing of portable, battery-operated products.

Product

Lead - Free Probes

-

Equip-Test Kft.

Equip-Test Kft.

Eliminates OSP contracting problems

Product

Battery Formation and Testing System

BFS 2000

-

BENNING Elektrotechnik und Elektronik GmbH

BFS 2000 - BENNING Elektrotechnik und Elektronik GmbH

For many decades now, BENNING has designed and manufactured charge/discharge converters for the battery industry. These converters are used in both the production and testing processes involved in battery manufacturing and for series-testing of batteries. BENNING's BFS battery production and testing system provides a solution which makes it easier to control and monitor production and test processes which saves both time and energy. When used in power stations and rail applications (mobile version), it can be used to test and maintain a wide range of battery types.

Product

PathWave Lab Operations For Battery Test

EP1150A

-

Keysight Technologies

EP1150A - Keysight Technologies

PathWave Lab Operations for Battery Test enables efficient planning and coordination of your entire battery test laboratory. It manages all resources, including test fields, test systems, and your device under test (DUT).  PathWave provides an integrated, web-based lab management platform that helps you modernize your test workflows, eliminating legacy paper-based processes, and increasing data integrity and traceability.

Product

Battery and Capacitor Testers

-

Kikusui Electronics Corp.

Kikusui Electronics Corp.

Battery test system developed on the basis of the experience and know-how that we have amassed through implementing numerous custom-built battery evaluation systems.

Product

Traction Battery Short Circuit Test Machine

-

Guangdong Bell Experiment Equipment Co.,Ltd

Guangdong Bell Experiment Equipment Co.,Ltd

Traction Battery Short Circuit Test Machine Relevant standards requirement:Single Storage Cell Safety Test6.2.4 Short circuitCharge the single storage cellaccording to 6.1.3 standardThe cellis to be short-circuited by connecting the positive and negative terminal with a external resistance of less than 5mΩ for 10 minObserve for 1HBattery module safety test6.3.4 Short circuitCharge the battery module according to standard 6.1.4The battery module is to be short-circuited by connecting the positive and negative terminal with a external resistance of less than 5mΩfor 10 minObserve for 1H

Product

Elevated 1.68 (48.00) - 7.00 (198.00) High Performance Lead Free Probe

LFRE-1I35-7

-

ECT

LFRE-1I35-7 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Battery & Electrical System Analyzers

-

Bosch Diagnostics

Bosch Diagnostics

Battery & Electrical System Analyzers by Bosch

Product

High 1.73 (49.00) - 8.00 (127.00) High Performance Lead Free Probe

LFRE-1H-8

-

ECT

LFRE-1H-8 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Test Leads

-

E-Z-Hook

E-Z-Hook

An IT professional who oversees the process of testing software before moving it to production.

Product

Test Device for Bicycle Batteries

ATGF 1500/PBG

-

Battery University GmbH

ATGF 1500/PBG - Battery University GmbH

The ATGF 1500 is a multifunctional testing instrument for bicycle batteries and accompanying battery chargers. The easy to use ATGF 1500 is suitable for battery systems of Derby Cycle, Gazelle, Simplon and ZEG. est programs: Quick Test, Capacity Test, Recalibration.

Product

Mag Lead w/Alligator Clips

138

-

Electronic Specialties Inc.

138 - Electronic Specialties Inc.

*54" Test Lead Set *Mag Lead features a magnetic disconnect. *You can "stick" to any metallic ground or test point. *Time saving product - can substitute for alligator clips at metallic test points. *Now, when you need alligator clips, you've got them! *Fits almost all DMM's and hand held scopes. *Get the Mag Lead, it stays put and won't fall off!

Product

Laboratory Battery Tester With Integrated Chamber

-

Arbin Instruments

Arbin Instruments

Compact and versatile, our portable desktop solution integrates Arbin's advanced testing features.

Product

Battery Testing

-

Speedgoat GmbH

Speedgoat GmbH

Electric vehicles (EVs) rely on batteries as their primary source of energy storage. As battery packs require battery management systems (BMS) to operate safely and reliably, it is vital to test control algorithms for state of charge (SoC) estimation or cell balancing at an early stage.

Product

Battery Tester 12V Language

BT12L

-

AUTO DIAGNOSTECH LTD

BT12L - AUTO DIAGNOSTECH LTD

The Battery Tester 12V Language (BT12L) is an inexpensive, simple and easy tool for testing automotive batteries. It has LED display that consumes very little current and will not drain the battery with repeated testing.