Push Pull Force
stength necessary to press on and extract.
See Also: Force, Compression, Crimp Force, Pull Force, Pull off Force, Peeling, Tension, Gravity, Electrical, Magnetic
-
Product
High Force Type Prbobe For PCB, K100 Series 100 Mil Pitch, Receptacle With Wire Wrap Pin
KR100-WP
Spring Probe
K100 Series, Pitch 100mil, Receptacle, with wire wrap pin. Brass with gold finish.
-
Product
Push Back Probes (VF3) VF383B0005G15
1005899
-
The Push Back Probes (VF3) VF383B0005G15, specifically coded as 1005899, is designed for precision and reliability in demanding applications. This basic contact probe showcases an operational temperature range of -45°C to +100°C, making it suitable for various environments. Its continuous current capacity of 8.00 A and a typical contact resistance of just 30.00 mOhm ensures efficient performance while maintaining superior electrical conductivity.
-
Product
ELECTRIC BRAKE FORCE METER WITH DYNAMIC LOAD SIMULATION AND CIRCUIT TESTING
MDTT9107
-
*Tests truck-side brake controller output and all towing-lighting functions without a trailer*Displays real-time brake controller output gain and timing*Quickly troubleshoots electrical circuits and ground condition*For use with aftermarket and integrated brake controllers*Microprocessor controlled; simulates trailer brake loads*25' cable allows one-man, in-cab testing of brake controller and all truck-side tow circuits*Use to verify that the vehicle’s adaptive (speed/load sensitive) brake-controller output is functioning properly
-
Product
Breaking Force Testers
-
Break Force Tester is applied for break force test of the ampoule, lipstick, lip cream and other materials.
-
Product
Closing Force Meter
-
Maschinenbau Haldenwang GmbH & Co. KG.
Is used to conveniently and reliably determine the closing force of externally operated service doors and locking devices.
-
Product
Load Pull Test Fixtures
-
Low Insertion Loss for High VSWR TuningMultiple Connector Configurations50Ω and Transformers (Klopfenstein, Quarter-wave) AvailableHeatsinks and Fans AvailableCooling (Water cooling, Forced air cooling) AvailableIntegrated Biasing Available
-
Product
Push Back Probes (VF4) VF416B180G05
1005150
-
The Push Back Probes (VF4) VF416B180G05, with order code 1005150, is designed to deliver exceptional performance in precision applications. Engineered with a basic contact probe design, the VF4 series boasts a pitch of 4.00 mm (157 mil), making it ideal for intricate electronic components. With a temperature range from -45°C to +100°C, it is suitable for various operating environments. This probe is crafted to handle continuous current up to 10A and maintains a low typical contact resistance of 30 mOhm, ensuring reliable electrical connectivity even under demanding conditions.
-
Product
Push Back Probes (VF3) VF317B230G15
1005901
-
The Push Back Probes (VF3) VF317B230G15, order code 1005901, is an advanced basic contact probe designed for high precision and reliability in various technical applications. Engineered to function within an impressive temperature range of -45°C to +100°C, these probes are built to withstand demanding conditions while providing accurate performance. The probe's design utilizes beryllium copper for the plunger, plated with gold, ensuring excellent conductivity and durability. Coupled with its brass barrel, also gold-plated, this probe offers exceptional resistance to wear and corrosion, making it suitable for a multitude of uses in electronic testing and measurement environments.
-
Product
Push Back Probes (VF3) VF306B300G05
1006281
-
The Push Back Probes (VF3) VF306B300G05, with order code 1006281, are high-performance basic contact probes designed to meet various demanding applications. Engineered for precision, these probes operate within a temperature range from -45°C to +100°C, ensuring optimal performance in challenging environments. With a pitch of 3.00 mm and continuous current handling of up to 8.00 A, these probes deliver reliable electrical connectivity and minimal contact resistance, typically at 30.00 mOhm. This makes them an excellent choice for applications that require accurate and durable connectivity.
-
Product
Push Back Probes (VF3) VF383B0006G15
1006146
-
The Push Back Probes (VF3) VF383B0006G15 are designed to meet a wide array of needs across various applications, delivering exceptional performance with precision and reliability. With a temperature range of -45°C to +100°C, these reliable contact probes ensure optimal operation in diverse environmental conditions. The basic contact probe design, coupled with an impressive continuous current rating of 8.00 A and a low typical contact resistance of 30.00 mOhm, makes them suitable for demanding tasks in both industrial and commercial settings.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type C, Ø1.50mm, 305gf
K100-C150305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style C, Tip Diameter Ø1.50mm, Spring force 305gf, Steel with Gold Plating.
-
Product
Clamping Force Meter
SKM 2 | VP 185051
-
Maschinenbau Haldenwang GmbH & Co. KG.
The SKM 2 closing force measuring device is used to conveniently and reliably determine the closing force of externally operated service doors and locking devices. It enables the determination of the effective force (Fe) as well as the peak force (Fs) and corresponds to the requirements according to § 29 StVZO as well as the directive 2001/85 / EG. The SKM 2 is equipped with a handheld terminal including an illuminated LCD for displaying measured values.
-
Product
Push Back Probes VF383B0001G05
1009567
-
The VF383B0001G05 Push Back Probes are precision-engineered components designed specifically for demanding applications where contact reliability is paramount. These probes, known by their model number VF3, boast a compact pitch of just 3.00 mm, making them ideal for use in tight spaces while ensuring functional accuracy under a temperature range of -45°C to +100°C. Their robust construction and advanced materials provide excellent durability, enabling them to perform efficiently even in harsh environments.
-
Product
AFM (Atomic Force Microscope) Optical Platform
-
The AFM platform allows fully-integrated use of confocal Raman microscopy and AFM for Tip-Enhanced Optical Spectroscopies (such as Tip-Enhanced Raman Spectroscopy (TERS) and Tip-Enhanced PhotoLuminescence (TEPL)), but also for truly co-localized AFM-Raman measurements.The myriad of AFM (Atomic Force Microscope) techniques that allow study of topographical, electrical and mechanical properties can be performed with any laser source available in Raman spectrometer, or with other external illumination (e.g., solar simulator or other tunable or continuum source). TERS and TEPL can provide nanoscale chemical and structural information, making the AFM-Raman platform a two-way road; where complimentary techniques provide novel and unique imaging capabilities to each other.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type L, Ø1.50mm, 305gf
K100-L150305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style L, Tip Diameter Ø1.50mm, Spring force 305gf, Steel with Gold Plating.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type E, Ø1.50mm, 305gf
K100-E150305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style E, Tip Diameter Ø1.50mm, Spring force 305gf, Steel with Gold Plating.
-
Product
Force Measurement Systems
-
Micro Edge Electronics Private Limited
As a reputed organization, we are engaged in manufacturing, importing as well as supplying a quality range of Force Measurement System. All these products are manufactured using high quality ingredients sourced from reliable vendor of the industry. These products are extremely rigid in state and ensure longer operational life. A team of skilled engineers and efficient technicians manufacture these products.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type D, Ø0.80mm, 230gf
K100-D080230-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style D, Tip Diameter Ø0.80mm, Spring force 230gf, Steel with Gold Plating.
-
Product
Push Back Probes (VF4) VF483B0010G05
1010809
-
The Push Back Probes (VF4) model VF483B0010G05 is engineered for precision in rigorous environments. With a pitch of 4.00 mm, these basic contact probes are designed to operate efficiently across a temperature range from -45°C to +100°C. Their robust construction, defined as S1, ensures reliability in various applications, making them a critical component in multiple industries. The probes are capable of supporting a continuous current of 10.00 A while maintaining a typical contact resistance of only 30.00 mOhm, showcasing their high-performance capabilities.
-
Product
Ergonomic Force Gauges
-
The ergonomic gauges from Chatillon are ideal for functional capacity evaluations and basic muscle strength measurements where economy and ease-of-use are essential. Simplicity is a key design criterion for these ergonomic gauges. They are an excellent, low cost solution for tensile or compression testing.
-
Product
Ergonomic Force Gauges
-
AMETEK Sensors, Test & Calibration
The ergonomic gauges from Chatillon are ideal for functional capacity evaluations and basic muscle strength measurements where economy and ease-of-use are essential. Simplicity is a key design criterion for these ergonomic gauges.
-
Product
Mechanical Force Gauges
-
The mechanical force gauges from Chatillon offer high precision compression testing (Push) and tensile testing (Pull) at a low cost on a wide range of testing applications.
-
Product
Push Back Probes (VF4) VF416B140G20
1005231
-
The Push Back Probes (VF4) VF416B140G20, with order code 1005231, are engineered for optimal performance in precision measurement tasks. Designed as a basic contact probe, these components excel within a temperature range of -45°C to +100°C, making them suitable for diverse applications. The probes feature a 4.00 mm pitch and deliver consistent electrical performance with a continuous current capability of 10A and a low typical contact resistance of 30 mOhm. This ensures reliable signaling in critical electronic systems.
-
Product
Push Back Probe (VF4) VF483B0001G05
1005604
-
The Push Back Probes (VF4) VF483B0001G05, with order code 1005604, is designed to provide precise and reliable performance across various applications. This basic contact probe features a compact design with a pitch of 4.00 mm, allowing it to integrate seamlessly into tight spaces while maintaining consistency in contact. With a temperature range of -45°C to +100°C, these probes are suitable for both cold and warm environments, making them extremely versatile.
-
Product
Push Back Probes (VF4) VF411B230G15
1005178
-
The Push Back Probes (VF4) VF411B230G15 are precision-engineered basic contact probes designed for high-performance applications. With a pitch of 4.00 mm and operational temperatures ranging from -45°C to +100°C, these probes effectively serve in various demanding environments, ensuring reliability and durability. The design incorporates advanced materials like beryllium copper and brass, featuring gold plating on both the plunger and barrel, which enhances conductivity while providing superior resistance to wear and corrosion.
-
Product
Push Back Probes (VF100) VF10017B180G05
1010313
-
The Push Back Probes (VF100) VF10017B180G05, with Order code 1010313, are an essential component for precise electronic applications. Designed with a basic contact probe structure, these probes offer flexibility and reliability, operating effectively in environments with a temperature range from -45°C to +100°C. Their 2.54 mm pitch makes them suitable for various circuit designs, ensuring excellent contact performance in demanding applications.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type Q, Ø0.80mm, 305gf
K100-Q080305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style Q, Tip Diameter Ø0.80mm, Spring force 305gf, Steel with Gold Plating.
-
Product
Push Back Probes (VF3) VF383B0007G15
1006292
-
The Push Back Probes (VF3) model VF383B0007G15 is meticulously engineered to deliver exceptional precision and reliability in various applications. With a pitch of just 3.00 mm, these basic contact probes are optimized for tight spaces, ensuring accurate measurements and connections. Designed to withstand extreme temperatures ranging from -45°C to +100°C, they are suitable for a wide range of environments, making them a versatile choice for both industrial and laboratory settings.
-
Product
Quartz ICP® Force Rings
-
Ring-style sensor configurations measure dynamic compression. Tension measurements are also possible if the unit has been installed with proper pre-load. The through-hole mounting supports platform, integrated link, and support style installations using either a through-bolt or the supplied stud.
-
Product
Push Back Probes (VF4) VF483B0003G15
1005220
-
The Push Back Probes (VF4) VF483B0003G15, designated under Order code 1005220, exemplify precision engineering designed for demanding applications. This basic contact probe, as outlined in the technical specifications, serves a critical role in its intended environments, capable of functioning effectively within a temperature range of -45°C to +100°C. The VF4 features a compact design with a pitch of 4.00 mm (157 mil), ensuring it fits seamlessly into various mechanical setups.
