Product

Standard Optical Interleaver

-

Optoplex Corporation

Optoplex Corporation

An innovative technique for expanding the number of channels per fiber involves an optical device, called an optical interleaver. For example, in most DWDM equipment, the standard channel spacing is 100 GHz. But spacing the signal-carrying frequencies every 50 or even 25 GHz can double or even quadruple the number of channels per fiber. This job is accomplished by an optical interleaver. Such a device takes two multiplexed signals with 100-GHz spacing and interleaves them, creating a DWDM signal with channels spaced 50 GHz apart. The process can be repeated, creating even denser composite signals with 25-GHz or 12.5-GHz spacing. The signals at the receiving end are recovered with the same devices used as splitters or optical de-interleavers. Thus, devices and/or networks can be upgraded without requiring that all devices be upgraded, or network bandwidth can be increased.

Product

FlexVNX+ 3-Slot Test And Development Platform Aligned To SOSA And VITA 90 Standards

39S03VPXZZY2VAND

-

ELMA Electronic, Inc.

39S03VPXZZY2VAND - ELMA Electronic, Inc.

Elma’s 3-Slot FlexVNX+ Development Chassis is the industry’s first compact, SOSA™ and VITA-90 aligned VNX+ platform, purpose built for rapid board bring-up, validation, and test of plug-in cards (PICs).

Product

Automated Temperature Resistance Standard

-

Measurements International Ltd.

Measurements International Ltd.

Exceptional Stability, Cost-effectiveness, Performance-based Results, 10 Ω, 25 Ω, 100 Ω, 200 Ω, 400 Ω and 1000 Ω Internal Standards, Built-in Temperature Chamber for Optimal Performance.

Product

Standard Air Capacitor Set, 1pF To 1000pF

16380A

-

Keysight Technologies

16380A - Keysight Technologies

The 16380A is a standard capacitor set consisting of four precision capacitors - 1pF (16381A), 10pF (16382A) 100pF (16383A), 1000pF (16384A). These capacitors are primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using these standards.

Product

Conformance Calibration Standard Test Card for GS1-128 Symbol Verifiers

AI-CCS-128-E Rev B

-

Applied Image, Inc.

AI-CCS-128-E Rev B - Applied Image, Inc.

This test card is ideal for testing of verifiers, scanners, and other GS1-128 barcode reading equipment. It also can serve as an excellent training aid to ensure new operators are using the proper methodology and are proven competent in the use of verifiers.

Product

Dytronic Primary Transfer Ultra Stable Standard

RD-22 Ultra

-

Radian Research, Inc.

RD-22 Ultra - Radian Research, Inc.

The RD-22 Dytronic Primary Transfer Ultra Stable Standard represents the state-of-the-art technology in a commercially available AC transfer reference. The Ultra Stable RD-22 is a variant of the RD-22 Primary Transfer Standard that has been optimized for 120/240 V @ 5A operation to provide optimum stability. In a stable test environment, repeatability for a 10-second test of ±0.6 µWh/VAh is attained at 120 V and 240 V at 5A inputs with a 95% confidence interval. A typical experimental 2 repeatability of less than ±0.25 µWh/VAh is achieved. In a stable test environment, a reproducibility of ±2 µWh/VAh over a five-day interval is attained at 120 V and 240 V at 5A inputs with 95% confidence interval.

Product

IEC Standard Burden Sets (Current)

IEC Burden Sets

-

TESCO

IEC Burden Sets - TESCO

Testing and calibrating current transformers often requires standard burdens of reliable accuracy and stability, and burdens that are immune to stray fields and harmonics. These burden sets have been carefully designed to meet these requirements. They also provide the standard burdens required for the testing of current transformers for metering service, and for the testing (within the current rating provided by the sets) of current transformers for relaying applications, all as called for by IEC (International Electrotechnical Commission) Publication 185: 1987.

Product

Automatic Battery with Filters with Standard Contactors

BATLVF1000

-

Lifasa - International Capacitors, SA

BATLVF1000 - Lifasa - International Capacitors, SA

LIFASA automatic capacitor banks are used for centralizedcompensation of power factor in low voltage instalations.

Product

Standard Round 2m Cables, Shielded, for Higher Current

ST010-S

-

TEAM SOLUTIONS, INC.

ST010-S - TEAM SOLUTIONS, INC.

Connection to digital boards, intended for higher currents. to be used with CPCI-1500, APCI-1500, APCI-1564, APCI-2032.

Product

Standard Electromagnetic Vibrator

KD-9363-EM

-

King Design Industrial Co., Ltd.

KD-9363-EM - King Design Industrial Co., Ltd.

The purpose of vibration testing is to make a series of controllable vibration simulation in lab, no matter generated by natural or man-made vibration environment; such as waves, tidal flaps, wind, earthquake or rain and so on. It is to test if the product is capable of sustaining the vibration environment exerted from transporting or usage along its effective life cycle; and certify the standard of design & functional requirement of product. The value of vibration testing is to confirm the reliability of products and effectively screen out the bad products in factory; avoiding damages occurred at arrival; and to assess the failure analysis on the non-performing products; expecting to reach a high standard, high-reliability products. The vibration test stresses on the continuity and fatigue; and contributes to the understanding of product’s status under vibration circumstance in a normal environment; and avoids the product’s unpredictable damage caused under certain vibrating frequency for a long time.

Product

Portable Three-Phase Energy Standard

PEWM-3C

-

EMSYST Ltd

PEWM-3C - EMSYST Ltd

The three-phase energy standard PEWM-3C is used for quick on-site tests of all types of electricity meters – for active, reactive or apparent energy, two-, three- or four-wire connection. Three voltages and three currents are measured at the same time. The current can be measured either via direct connection up to 10A (class 0.1), or with three current clamps (CC) to 120A, 150A or 1000A (class 0.2).

Product

Standard Voltage 37 Pin D-Type Cables - Calibration Cables for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The cable assemblies below are suitable for use with Pickering precision resistor cards and modules that utilize 37-pin D-type calibration port connector.