Interface Test Adapters
Interface Test Adapter; Interface Connector Adapter: Interface Device Also known as: ITA
See Also: Test Adapters, Interface Adapters, ITA
-
Product
Enclosure, 50 Module, 50 Module 4" Adapter for 25 Module, Hinged Cover
410112336
Enclosure
This 50 Module Enclosure is made of aluminum, and the top of the enclosure is a hinged cover plate with ¼ turn hardware that provides easy access to the ITA’s wiring when required. It also includes an adapter plate part to mount the enclosure to a 25 Module ITA.
-
Product
VTAC, Patchcord, ITA, 36", VTAC, Display Port, to 20-pin Display Port
7-141897726-036
VTAC Patchcord
VTAC, Patchord, ITA, 36", VTAC, Display Port, to 20-pin Display Port.
-
Product
PCB Contacts
-
VPC contacts are available in a variety of configurations to support flexible PCB mounting including right angle, vertical, twin female & male, and adapter pins (rounded posts).Many PCB receiver contacts are compatible with standard ITA contactsFor questions regarding compatibility, contact a Field Application Engineer.
-
Product
Mini Coax, Module, ITA, 90 Series, 19 Position
510108111
ITA Module
Primary mating module 510104120. (May mate with other Receiver modules, as well.)
-
Product
Signal / Micro Power/ Micro Coax, Module, Receiver, QuadraPaddle, iCon Series, 100/15 Position, loaded w/twin female contacts
510160112
Receiver Module
This module comes fully loaded with twin female contacts (p/n 610138200), iCon modules mount from the rear of the iCon/i1 receiver allowing installation and removal of pre-wired cable blocks. Primary mating module 510161107. (May mate with other ITA modules, as well.)
-
Product
Signal, Module, Receiver, TriPaddle, 90 Series, 64 Position
510104134
Receiver Module
Primary mating module 510108101. (May mate with other ITA modules, as well.)
-
Product
VTAC, Patchcord, ITA, 36", VTAC, DVI-D, Double Ended
7-141877141-036
VTAC Patchcord
VTAC, Patchcord, ITA, 36", VTAC, DVI-D, Double Ended
-
Product
Power, Patchcord, ITA, 36", High Power, 2 AWG, Single Ended (150 Amps)
7-222902000-036
Power Patchcord
Power, Patchcord, ITA, 36", High Power, 2 AWG, Single Ended (150 Amps).
-
Product
RJ45 (Ethernet 100 Base T) to 90 Series Interface
J90RJ45I
Ethernet Interface
RJ45 Ethernet connector for VPC Tripaddle ITA moduleUp to 3 connectors per moduleFor Cat 5 Fast Ethernet cable IEEE 802.3 standard100 Base-T
-
Product
VTAC, Patchcord, ITA, 36", VTAC, HDMI, to ITA, HDMI
7-141891693-036
VTAC Patchcord
VTAC, Patchcord, ITA, 36", VTAC, HDMI, to ITA, HDMI.
-
Product
Signal, Module, Receiver, QuadraPaddle, 90 Series, 192 Position, Fully Loaded w/ Twin Female Contacts
510150130
Receiver Module
Primary mating module 510151105. (May mate with other ITA modules, as well.)
-
Product
Signal / Mini Coax, Module, ITA, TriPaddle, 90 Series, 16/16 Position
510108210
ITA Module
This module can accommodate certain VPC mini pneumatic contacts, but cannot be fully populated in all 16 positions with them. See specific product drawings for applicable limitations. For further assistance please contact a Field Application Engineer. Primary mating module 510104243.
-
Product
Coax/20-26 GHz/ 75 Ohm HD, Module, Receiver, iCon Series, 18 Position
510160114
Receiver Module
iCon modules mount from the rear of the iCon receiver and ITA and allow installation and removal of pre-wired cable blocks. Primary mating module 510161114. (May mate with other ITA modules, as well.)
-
Product
VTAC, Patchcord, ITA, To (3) Twinaxial Stranded, 28 AWG
7-147719000-036
VTAC Patchcord
VTAC, Patchcord, ITA, to (3) Twinaxial Stranded, 28 AWG
-
Product
Receiver, 9025, 25 Module, with Slide Mounting Kit
310104387
Receiver
The 9025 is a 25 module receiver compatible with all standard VPC 90 series modules and contacts and includes a locking handle to ensure proper ITA engagement. Includes mounting flanges and instrument bracket. Requires slide kit, not included.
-
Product
G12x Slide Mount
-
For maximum versatility and easy access to instrument-side wiring and cable assemblies, VPC offers a selection of slide kits designed to fit most common rack depths. The G12x uses the same platform and slides as the G12, providing support up to 180 lbs (81 kg) to accommodate the largest fixtures. G12x accepts ITAs designed for both the G12 and G12x.
-
Product
Receiver, ICon, Reverse Module Configuration For ICon ITA Modules, With Protective Cover
310123103
Receiver
Receiver, iCon, Reverse Module Configuration for iCon ITA Modules, with Protective Cover
-
Product
ITA, BT3, Benchtop Series, 3 Module
410104065
ITA
ITA, BT3, Benchtop Series, 3 Module.Mating Receiver 310104512. (Not compatible with other VPC Solutions)
-
Product
Receiver, 9025, 25 Module, Slide Mount, Telescopic Handle - Left Side
310104498
Receiver
The 9025 is a 25 module receiver designed to fit into a standard 19" rack. This model is equipped with a telescopic handle on the left side. This handle is designed to rest flush against the side of the receiver as a standard handle, or can be extended out to the left up to 3" to accommodate a larger ITA enclosure or other obstruction that may prevent normal handle operation/ engagement.As with the standard 9025, a microswitch is included. Mounting flanges and an instrument bracket are also included for slide mounting. A slide kit is required, but not included. See 9025 procedure sheet/ user manual for instructions on choosing the correct slide kit length for your test rack. *Please note: Consult procedure sheet/user manual for information regarding slight slide mechanism bracket protrusion downward into next U height on test rack on both sides of receiver.
-
Product
Blank, Module, ITA, Pull-Thru, 1 Position
510130284
Blank Module
Blank, Module, ITA, Pull-Thru, 1 Position.
-
Product
Micro Power/ Micro Coax, Module, Receiver, iCon Series, 40 Positions
510160106
Receiver Module
Primary mating module 510161106. (May mate with other ITA modules, as well.)
-
Product
Receiver, 9050, 50 Module, for 36" Slide Mounting Kits only
310104483
Receiver
This 50 module receiver is equipped with a locking handle to ensure proper ITA engagement. A standard integrated microswitch shuts off power when the ITA disengages from the receiver. This receiver is specially designed to work with the 36" slide kit p/n 310113500 (which is required, but not included) through the use of a longer instrument bracket.
-
Product
9025TR - 25 Module Solution with Platform
-
The 9025TR has over twice the I/O as the G12 and is outfitted with the same 20-inch platform to support enclosures while engaging and disengaging. The front-mount ITA is user-friendly, allowing the enclosure or fixture to be fastened from the mating side. The docking feature of the 9025TR provides an easy way of guiding a fixture into position prior to engagement. Runners along the platform provide a smooth-sliding action, ideal when using fixtures up to 180 pounds. The 9025TR uses all standard modules and contacts, includes a microswitch and is available with optional table legs and keyboard tray kit.
-
Product
Signal, Patchcord, ITA, 36", TriPaddle, 26 AWG Twisted Pair White/Black, Single Ended (1.5 Amps)
7-105426000-036
Signal Patchcord
Signal, ITA, TriPaddle (7 Amps) 26 AWG Twisted Pair White/Black (1.5 Amps)
-
Product
Tool, Crimp, Mini Coax, ITA, 24-26 AWG Wire
910101118
Crimp Tool
Used to crimp Mini Coax ITA contacts to 24-26 AWG wire. Locator required.
-
Product
Backshell, I1, Receiver, With Large Clamp Kit
310113727
Backshell
The receiver backshell is used with the i1 Receiver. It is not mounted to a rack or panel. The backshell provides protection for exposed wiring and is ideal for use with the i1 Receiver and ITA when used in a cable-to-cable application.
-
Product
VTAC, Patchcord, ITA, 36", VTAC, USB 3.0, To USB 5 Gbps (USB 3.0, USB 3.1 Gen 1, USB 3.2 Gen 1) Type A Male
7-141890690-036
VTAC Patchcord
VTAC, Patchcord, ITA, 36", VTAC, USB 3.0, to USB 5 Gbps (USB 3.0, USB 3.1 Gen 1, USB 3.2 Gen 1) Type A Male
-
Product
ITA, S6, 6 Module, Inline, 1U
410122103
ITA
This S6 ITA is designed for inline applications and is 1U in height.
-
Product
Receiver, G12x, 18 Module, with 20" Platform for Tabletop, w/ Left Handle
310104151
Receiver
Receiver, G12x, 18 Module, with 20" Platform for Tabletop, w/ Left Handle Engagement handle located on left side versus standard right hand side Designed for tabletop Includes a 20” platform Equipped with VPC’s Quadratrack™ engagement system 20,000 cycles Handle can be rotated in 90 degree increments Can accept G12x ITA or G12 ITA
-
Product
Signal, Module, ITA, TriPaddle, 90 Series, 96 Position, with Right Angle Contacts
510108125
ITA Module
Primary mating module 510104135. (May mate with other Receiver modules, as well.)
