Product

Rolling Seal 4 Optical Connector

RS4

-

Teledyne Marine ODI

RS4 - Teledyne Marine ODI

- ​GAF/ELI enhances mating efficiency and eliminates potential for shell damage while offering positive latch indication.- Longer, contoured cable end lead-in bushing enhances fine alignment of connector halves during the mating sequence.- Reduced channel count to align with more efficient field architectures.

Product

Optical OTDR

TLM-01D

-

Hangzhou Tuolima Network Technologies Co., Ltd.

TLM-01D - Hangzhou Tuolima Network Technologies Co., Ltd.

OTDR-01D series handheld optical time domain reflectometer (OTDR) is a new generation of intelligent optical measuring instrument designed for the optical fiber communication system testing by TUOLIMA Network Technologies Co., Ltd.. This product is mainly used to measure the parameters of optical fibers and cables, such as length, loss, and connection quality, etc.; it can realize the accurate positioning of event points and fault points, and can be widely used in the construction, maintenance testing and emergency repair of the optical fiber communication systems as well as the research, production and production measurement of optical fibers and cables and so on. This product can provide you with the highest performance of solutions for installation and construction of fiber optic network construction and the subsequent fast and efficient maintenance and troubleshooting testing.

Product

Optical Assemblies

-

Promet International Inc.

Promet International Inc.

Our team works closely with your design team to develop a custom, long-term production solution that fits your specific program. Our manufacturing niche is in low- and mid-volumes (10 to 1,000 units) for assemblies with demanding or non-standard optical performance requirements. Along with Promet’s rigorous QC protocols, our in-house testing labs and engineering support ensure a well-controlled process and predictable results.

Product

Carbon-Fiber Reinforced-Polymer Optical Breadboards And Benches

-

Advanced Photonic Sciences LLC

Advanced Photonic Sciences LLC

Carbon fiber optical breadboards provide a similar thermal stability to Super Invar but at a lower cost and are inherently non-magnetic. For ages, steel breadboards have been the only choice; however, structures made from carbon fiber reinforced polymer (CFRP) have been used in the aerospace and space industries for many years due to their low weight, high strength, excellent thermal stability and low resonant frequencies. APS now brings this advanced technology to the world of photonics in the United States and Canada with carbon fiber breadboards from CarbonVision. Four grades of carbon fiber breadboard are offered: the economic EC-Series, the advanced AD-Series, the all-carbon AC-Series, and the slim SL-Series.

Product

RS232 Mode SI-module With Optical Isolation

MX232-G

-

TEAM SOLUTIONS, INC.

MX232-G - TEAM SOLUTIONS, INC.

RS232 mode SI-module with optical isolation

Product

Receiver Front Ends & Transceivers

-

Quantic PMI

Quantic PMI

PMI offers various RF and Microwave receiver front-end products up to 40.0 GHz.  Custom options are available. 

Product

Small Diameter Tubes Optical Bubble Sensor

BE-A

-

Panasonic Industrial Devices Sales Company of America

BE-A - Panasonic Industrial Devices Sales Company of America

*One-touch Attachment*For Small Diameter Tubes*High Speed Response Time*Ultra Compact*For A Wide Range Of Power Supply Voltages*Built-In Amplifier*Allows For Close Proximity Attachment*CE Approved*CE: EMC Directive

Product

Optical Fiber 1×8 Switch

OFSW - 1 × 8

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 8 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×8 is a 1×8 prism optical switch. It can support 1 optical fibers input and 8 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Optical Laser Source Products

-

Keysight Technologies

Keysight Technologies

Tunable Laser Source, Compact Tunable Laser Source, Fabry-Perot Laser Source Modules and Distributed Feedback Laser Source Modules.

Product

Automated Optical Inspection (AOI)

-

Test Research, Inc.

Test Research, Inc.

Automated optical inspection (AOI) is an automated visual inspection of printed circuit board (PCB) (or LCD, transistor) manufacture where a camera autonomously scans the device under test for both catastrophic failure (e.g. missing component) and quality defects (e.g. fillet size or shape or component skew). It is commonly used in the manufacturing process because it is a non-contact test method.

Product

Transmissive Optical Encoder Module

EM2

-

U. S. Digital

EM2 - U. S. Digital

The EM2 provides digital A & B quadrature outputs with a third output index channel. Each EM2 module is resolution specific and is matched to the resolution of a code wheel. The EM2 operates with a single 5V supply and provides single ended outputs which are capable of both sinking and sourcing 5mA. An internal 0.1 uF decoupling capacitor is designed into the EM2 to provide enhanced noise immunity.

Product

Inductively Coupled Plasma Optical Emission Spectrometer

EXPEC-6000

-

Focused Photonics Inc.

EXPEC-6000 - Focused Photonics Inc.

An analytical technique used to determine how much of certain elements are in a sample.

Product

Quantitative Optical Gas Imaging System for GF620/GFx320/GF320

FLIR QL320

-

Teledyne FLIR

FLIR QL320 - Teledyne FLIR

The QL320 is a quantitative optical gas imaging (QOGI) system that allows surveyors to measure the leak rates for methane and other hydrocarbons. This eliminates the need for secondary sampling with a toxic vapor analyzer or similar tool. In addition, the QL320 does not require close contact with the gas in order to measure emission rates, making it a safer solution for quantifying difficult-to-measure gas leaks.

Product

Fiber Optic Contacts

-

Virginia Panel Corporation

Virginia Panel Corporation

VPC offers Multimode and POF patchcords designed to meet a variety of fiber optic cabling needs.

Product

Inductively Coupled Plasma Optical Emission Spectroscopy / ICP-OES Systems

-

Agilent Technologies

Agilent Technologies

Industry-leading performance, speed and ease of use – no compromises

Product

Reticles, Optical Slits, Optical Apertures

-

Applied Image, Inc.

Applied Image, Inc.

With over 30 years of experience in the manufacturing of high precision Reticles, Slits, Apertures, and Pinholes, APPLIED IMAGE has gained a reputation for delivering precise and accurate parts. We have supplied thousands of these parts to be used in Day/Night Sights, Binoculars, Targeting Systems, Telescopes, Tank Sights, Microscopes, and many other Bore-Sight devices.

Product

Optical Power And Energy Meters

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs' expanding line of optical power and energy meters includes power meter consoles, a large selection of sensor heads, a wireless power meter with a built-in photodiode sensor, and a fiber optic power meter designed for use in the field. The consoles (PM100, PM400, and PM300 Series) when paired with our extensive line of power and energy sensors provide calibrated (NIST traceable) measurements across a broad range of powers, energies, and wavelengths. The console(s) and sensor(s) can be purchased individually or as bundles based on our most popular console and sensor pairings. The sensor calibration data is stored in the sensor head and is automatically read by the console, which allows the user to use multiple sensors with the same console. Compatible sensors are easily identified by the red c-series connector. All of our old A/B-Type sensors are available with the new connector; plus, we have continued to expand our power and energy sensor product lines.

Product

Ultrafast Nearfield Optical Microscope

Femtosecond NSOM

-

Del Mar Photonics, Inc.

Femtosecond NSOM - Del Mar Photonics, Inc.

Near-field Scanning Optical Microscope (NSOM) is a versatile tool for nano-characterization and nano-manufacturing.

Product

Photo Optic Sensors

-

TE Connectivity Ltd.

TE Connectivity Ltd.

From patient monitoring in hospitals, to wearables and home healthcare applications, TE Connectivity (TE) offers photo optic sensors and components for non-invasively measuring blood oxygenation (SpO₂) level. With more than 27 years of proven reliability and expertise, TE has designed SpO2 sensors with best-in-class flexibility to accommodate multiple wavelength options. Our ability to provide both components and complete sensor packages make us the leading choice for pulse oximetry applications that require high degrees of precision, durability and performance.

Product

Quad Digital Receiver Hardware

DP-VME-5841

-

Data Patterns Pvt. Ltd.

DP-VME-5841 - Data Patterns Pvt. Ltd.

DP-VME-5841 is a VME-based quad digital receiver hardware module, which measures the pulse parameters of RADAR in the real time. This module is particularly suited for radar systems, where the signals must be sampled at a high rate and very high purity programmable signal generation.