Product

G20x - 28 Module Pull-Thru, Scalable Receiver

-

VPC

VPC

G20x offers the features of the G20 system, and adds an additional 8 modules in an extended tier for higher I/O needs. This solution uses 6.75" Series Pull-Thru Adapters.

Product

170-Pin Signal Block

-

ATX Hardware GmbH

ATX Hardware GmbH

Receiver Pylon block 170-pin Signal block: Pyramid small (Pk) / Pyramid large (Pg) / Dagger (D). Material: 6mm EGS619. Spring contact - head shape = pyramid small ( RSP 2T) / pyramid large ( EPA-2T) / dagger ( GSP-2B). Sleeve aligned with WireWrap / solder / round connection. Needle projection = 6.2mm (Pk + Pg) / 5.2mm (D). Recommended working stroke: 2.6mm. Grid dimension = 2.54mm. Max. Rated current 1A.

Product

FOCL Reference Signal Modem

VCH-607

-

VREMYA-CH JS Company

VCH-607 - VREMYA-CH JS Company

FOCL reference signal modem VCH-607 is designed to receive and transmit electrical signals with a nominal frequency of 100 MHz through a fiber-optic system and generate electrical signals with a nominal frequency of 5 and 10 MHz, coherent with the input signal. Reception and transmission through the FOCL is provided using a pair of modems: one is configured as a Transmitter and is installed at the end of the FOCL where the signal source is located, the second is configured as a Receiver and is installed at the opposite end of the FOCL.

Product

48" Stacking Banana Plug Test Leads

146-P

-

Electronic Specialties Inc.

146-P - Electronic Specialties Inc.

These test leads feature stacking banana plug jacks, with extended 48" length. These are great for establishing connections to diagnostic test points, while allowing the connection to be tapped with other instruments...2 way connections. These feature high flexibility wire and standard 4mm size banana jacks. You will receive one red test lead and one black test lead. These test leads are compatible with Electronic Specialties 146 and 147 test lead kits.

Product

3207a GPS/GNS Frequency and Time Reference

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

The ptf 3207A GlobalTyme2 GNS Receiver introduces a new level of advanced capability from a second generation, based on the highly successful ptf 3203A and ptf 3204A GlobalTyme receivers.The unit is both a frequency standard and a time standard and has been used as a precision frequency reference with low phase noise, in satellite communications applications around the world.

Product

Syscal Pro

-

IRIS Instruments

IRIS Instruments

The Syscal Pro is an all-in-one multinode resistivity and induce polarization sounding and profiling system for environmental and engineering geophysical studies. The Syscal Pro gathers a 10 channels receiver and a 250 W internal transmitter which make it the more powerful system of the Syscal range. Compact, easy-to-use and field proof, the Syscal Pro measures both resistivity and chargeability. It is ideal for environmental and civil engineering applications such as depth-to-rock determination, weathered bedrock mapping. With a maximal output voltage of 2000Vpp, the Syscal Pro is very adapted to detect deep fault in fractured aquifers or to characterize the depths and thickness of the groundwater aquifers.

Product

Bias Tee's

-

JYEBAO Co., Ltd.

JYEBAO Co., Ltd.

A bias "T" consists of a feed inductor to deliver DC to a connector on the device side and a blocking capacitor to keep DC from passing through to the receiver.

Product

9050 VXI - 50 Module Solution for VXI cards

-

VPC

VPC

The 9050 VXI Solution is designed for use with VPC's  pre-wired interconnect adapters on the top tier and discrete wiring modules on the bottom tier. The receiver opens downward via hinges to give the user access to the instruments in the rack. A microswitch, which comes standard, allows for shut off any power going through the system before removing the ITA. Using a plug and play plate or a flange kit allows for easy mounting of the receiver to any 19” rack system.

Product

Boundary Scan Compliance Tester

QT900

-

Qmax Test Technologies Pvt. Ltd.

QT900 - Qmax Test Technologies Pvt. Ltd.

QT900 Qscan Test system is designed to provide test solution for both Boundary Scan compliance devices and Non Boundary Scan devices. The System provided with Digital IO’s capable of driving and receiving via JTAG IEEE 1149 standard interface and synchronous to JTAG pins. Both Digital and JTAG test are carried out synchronously. Use of virtual test pin and Edge connector eliminates the need of expensive test fixture strategy.

Product

Data Communications

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Renesas has receivers, line drivers and encoder-decoders for data communications applications, as well as products that cover ARINC and Manchester specifications.

Product

Transient Limiter

TBFL1

-

TekBox Singapore Pte. Ltd.

TBFL1 - TekBox Singapore Pte. Ltd.

The TBFL1 is a combined transient limiter / attenuator / high pass filter, designed to provide optimum protection of spectrum analyzer or measurement receiver inputs when carrying out conducted noise measurements or other measurements where the input levels cannot be predicted with certainty or where accidental overloads may occur.

Product

AirTech Test Systems

-

Ingenieurbüro Dr. Hillger Ultrasonic-Techniques

Ingenieurbüro Dr. Hillger Ultrasonic-Techniques

Hillger NDT has developed AirTech testing technology for the requirements of air-coupled testing. Our USPC 4000 AirTech ultrasonic testing system and our robust AirTech sensors consisting of optimized transmit and receive probes deliver optimal results under demanding conditions.

Product

Electrical Receiver Conformance Test Application for IEEE 802.3bs/cd

M8091BSCB

-

Keysight Technologies

M8091BSCB - Keysight Technologies

IEEE 802.3bs receiver test application for 200GAUI-4 and 400GAUI-8, covering chip-to-module, chip-to-chip, backplane, and copper cable interconnects.

Product

Boiler Tube Oxide Scale Nondestructive Tester

DX-201'

-

Dexing Magnet Tech. Co., Ltd

DX-201' - Dexing Magnet Tech. Co., Ltd

This instrument is suitable for measuring non-magnetic stainless steel pipe inner layer accumulation rust. It can use a rechargeable battery, without power supply when test, which is suitable for outdoor environment operation. It can be used 4 hours once charge saturation. This product has been used by Hunan Xiangtan Power Generation Company Limited, Wuhan University, Nanyang Henan Yahekou Power Generation Co., Ltd., Anhui Huainan Pingwei power plants and Changsha thermal power plant, received good evaluations.

Product

IRIG B Booster

-

Signals & Systems India Private Limited

Signals & Systems India Private Limited

IRIG B Booster – SIB-1010 is used to boost the IRIG-B AM and PWM/TTL signal which is received from the GPS unit. It provides easy and affordable connectivity to substation equipment and power generation and distribution equipment. With this Plug-N-Play unit, you can expand your IRIG B connections to multiple devices instantly. It is rugged and surge-protected equipment. Its cabinet can be mounted directly on a wall, panel or DIN Rail, without the need for additional brackets. It has an inbuilt power supply module, therefore, doing away the need for an external power adapter.

Product

Regulated Transmitter

VIP 5000

-

IRIS Instruments

VIP 5000 - IRIS Instruments

The VIP series of Electrical transmitters are purposely designed for deep Induced Polarisation or Resistivity sounding investigations. The VIP 5000 internal microprocessor is capable of excellent current regulation in almost any load. Predominantly used as part of mineral exploration studies, the VIP series include three systems with different power specifications. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers.