-
Product
USB Modular Source Measure Unit
U2723A
Source Measure Unit
The 3-channel 20V/120mA module can operate in a 4-quadrant operation. The channels could be connected in series or in parallel to achieve up to 60 V/360 mA. It uses the common non-proprietary standard high-speed USB 2.0 interface that provides ease of connectivity allowing users to set up and configure their tests swiftly with its plug and play feature.
-
-
Product
Source Measurement Unit
PEMU4
Source Measure Unit
The PEMU4 represents a new level of performance and capabilities for USB-based SMU (Source MeasurementUnit) instrumentation. The PEMU4 supports -1V to +6.5V 0.5A with FVMI, FVMV, FIMV, FIMI modes. 4 channel can be ganged to support high current driving. I2C/SPI/RFFE function for serial port device testing. 4 Counter for frequency measurement.
-
Product
PXIe-4145, 4-Channel, ±6 V, 500 mA Precision PXI Source Measure Unit
782435-01
Source Measure Unit
PXIe, 4-Channel, ±6 V, 500 mA Precision PXI Source Measure Unit - The PXIe-4145 is a 4-channel source measure unit (SMU) ideal for high-pin-count applications. It features 4-quadrant operation, and each channel has integrated remote (4 wire) sensing for accurate measurements. The fast sample rate of the PXIe-4145 can reduce measurement times, capture transient device characteristics, and allow quick I V characterization of devices under test (DUTs). With a high-speed sequencing engine, you can synchronize all these SMUs with each other or with other instruments such as switches or high-speed digital test modules. Additionally, you can tune the PXIe-4145 response to any load to achieve optimum responses with maximum stability and minimum transients using SourceAdapt technology.
-
Product
Surface Roughness Measuring Machines
-
Portable Surface Roughness Measurement instruments whose analysis function and operability are dramatically evolved
-
Product
4- Channel PXI Source Measure Unit (SMU)
GX3104
Source Measure Unit
The GX3104 is a precision 3U PXI module that forces and senses both voltage and current over a range of ±20 V and up to ± 1 A ( channel 1) with channels 2- 4 capable of supplying up to 500 mA. Total available output current from the module is 1A. The four channels are electrically isolated from the PXI power supply and share a common, isolated ground.
-
Product
4-Quadrant General-Purpose Source/Measure Unit, ±20 V, ±1 A Or ±6 V, ±3 A, 20 W
N6784A
Source Measure Unit
The Keysight N6784A is a source/measure unit (SMU) designed for general-purpose precision sourcing and measurement. General-purpose applications can span many different industries and many different devices under test (DUTs). The N6784A SMU is a versatile tool designed to tackle many of these general-purpose applications. Its glitch-free operation ensures safe usage with the DUT during output and measurement range changes, even with capacitances of up to 150 µF. Its 4-quadrant operation enables it to act as a bipolar power supply or a bipolar electronic load, for added versatility. When using the N6784A SMU, engineers can be confident that they have an all-around general-purpose tool for their test systems or lab bench.
-
Product
CMM Styli
-
Q-Mark manufactures styli and accessories for the metrology and machine tool industries.
-
Product
Contour And Surface Measuring Machines
-
The contour and surface measuring machines from ZEISS offer different, sometimes combinable sensors for roughness measurements, contour measurements or both. The contact-free linear drive makes these machines highly efficient and low-maintenance.
-
Product
PXIe Precision Source/Measure Unit, 1.25 MSa/s, 10 fA, 210 V, 315 mA
M9601A
Source Measure Unit
M9601A PXIe precision SMU is the industry-first precision PXIe SMU enabling faster precise measurement from DC to 20 μs pulse up to 210 V/315 mA with the best-in-class 10 fA resolution and low noise.
-
Product
Gear measuring machines
-
WENZEL offers innovative solutions for the measurement of gears and rotationally symmetrical workpieces
-
Product
Dedicated Measuring Machine
-
We offer measurement systems optimized for various production sites. We design and manufacture high precision, stable specialized measuring instruments to match requested specifications and requested performance.
-
Product
PCI Express X4, 4-Port USB 3.0 Expansion Card
PCE-USB
Machine Vision Expansion Module
Four USB 3.0 host controllers, Support 1500mA Max. Current per Port. Supports four or eight USB 3.0 ports, 3 Ports with Locking connector compliant with USB3 Vision V1.0 Standard-A. Compliant with USB 3.0 Specification and Intel® xHCI Specification, Revision 1.0, PCI Express x4 interface.
-
Product
Manual Vision Measuring Machine
SVM II
-
Developed from Hexagon group’s leading vision technology, SVM series vision measuring machine perfectly combines traditional optical and latest computer image processing technology. Simple, accurate, versatile and effective, it is capable of basic element precision measurement on point, line, circle, etc., can accommodate batch measurement, has SPC functions, and is open for constant upgrade, with SVM series vision measuring machine’s powerful functions, reliable performance, continuously updated technology It is now widely applied in mechanical, electronics, house appliances, mold, optical and other precise hardware industries and can also be used for engineering development, drawing and production inspections, etc.,
-
Product
High Precision Source Measure Unit (SMU) - Hybrid Compatible PXI, 100ks/S Programming/Measurement Speed
52400 series
Source Measure Unit
Hybrid Compatible PXIFour quadrant operationHigh source/measurement resolution (multiple ranges)Low output noiseHigh programming/measurement speed (100k s/S) & slew rateOptional measurement logDIO bitsOutput profiling by hardware sequencerProgrammable output resistanceFloating & Guarding output16 Control Bandwidth SelectionMaster / Slave operationDriver with LabView/LabWindows & C/C# APISoftpanel GUI
-
Product
Automobile Engine-related Measuring Machines
-
Automatic Measuring Systems > Automobile engine-related measuring machine. Crankshaft, Camshaft, Cylinder block, Piston, Compressor wheel and Cylinder head.
-
Product
For Machining Center
-
We offer the ATC Run-Out Detection System and the Wireless Bore Gauge. We will boost the realization of increased productivity with high precision measurement technology.
-
Product
Tapping Machine
BAS004
-
The BAS004* is used to simulate foot fall noise in a manner that is well controlled and reproducible so that measured results can be replicated and compared with other measurements.
-
-
Product
Measurement
Strain Gauge Meter
-
The program Strain gauge meter is intended for various strain gauge measurements with the use of strain gauge transducers (e.g., force and torque transducers, RPM sensors, bridge and half-bridge circuits based on strain gauges, etc.) and a measurement module for strain gauges ZET 017-T.
-
Product
Spring Testing Machine
-
This machine is designed to test laminated springs and coil springs. The test is held under laminated springs and coil springs. The Cabinet comprises of the hydraulic unit, the hand wheel of the pump and the release valve handles are outside the cabinet for easy operation. This compact base carrier two fixed upright and four horizontal plates. The first and the third plates with two small uprights from an adjustable frame. The second and the fourth plates are fixed. A square threaded wheel arrangements provided for adjusting the height of the springs.
-
-
Product
Machine Capability
NC-Checker
-
Metrology Software Products Ltd
We fine-tune your machine tools with automated diagnostics and precise calibration. We leave you with our NC-Checker software so you can benchmark the accuracy of your machine to assess its ongoing capability.
-
Product
Machine Modules
-
JRT Photovoltaics GmbH & Co. KG
Our machine platforms for the production of automotive and electronic components are comprised of standard modules. Tried, tested and GMP directive compliant developed, they form the efficient basis for customized designs.
-
Product
PHOTOMASK INSPECTION MACHINE
NEGATIVE FILM
-
Negative film and photomask inspection originated from the extensive use of printed circuit boards. Negative films and photomasks are used in large quantities. The early detection method is to use the "inspection light table" for inspection, which requires too much manpower and material resources, and manual testing may be due to eye fatigue and negligence.
-
Product
Tensile Testing Machine
-
High accuracy of ±1%Three measuring ranges for accurate testing.Easy in operation and maintenance.Incorporate high level technology.Highly Accurate and precise.Modular designAffordableSafe and reliable
-
Product
Precision Machining
-
Several of our facilities have extensive in-house machining capabilities, with high-end automated systems that allow us to maintain strict control over the quality and delivery of our products, as well as managing costs. This means that we don't have to coordinate with outside suppliers or pass on any additional costs to our customers. Our experienced machinists use modern equipment to produce precision parts and components quickly and efficiently, ensuring that our customers receive the highest quality products on time, every time.
-
Product
Machine Condition Monitoring
-
The system enables precautionary interventions to prevent equipment downtime, increasing equipment lifetimes and reducing maintenance costs. Operational reliability, security, and productivity all benefit.
-
Product
In Situ Testing Machine
IST Series
-
Jinan Testing Equipment IE Corporation
*Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. *Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4. *Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.
-
Product
High-Speed Machine Vision
-
Cameras provided by Optronis for applications in machine vision as well as research allow to capture and transfer images at very high frame rate. These high-speed machine vision cameras are offered in 3 series. Each CamPerform series uses a different interface for data transfer.
