Product

Optical Light Sources

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

Fiber Optic Light Sources are a necessity for performing fiber optic network testing to measure the fiber optical loss for both single mode fiber cable and multimode fiber cables. They are designed to cover a variety of wavelength ranges to suit all optical testing needs and usually the optical light sources are used with the fiber optic power meter to test the fiber system loss. Light sources are offered in a variety of types including LED, halogen and laser. Usually the optical light source is used with the fiber optic power meters, they act as an economic and efficient solution for the fiber optic network works. SunmaFiber offers handheld fiber optical light source and laser light source.

Product

Optical Talk Set

FTS100

-

Shanghai Tarluz Telecom Tech Co., LTD

FTS100 - Shanghai Tarluz Telecom Tech Co., LTD

In some rural site, the mobile phone may be out of service range, if conversation between two operators who are laying down an optical cable for optical network needed. in the situation, Tarluz Fiber Talk Set is essential. With the optical talk sets, the two operators can have talk with each other directly via an intact optical fiber. It is easy and reliable. TARLUZ FTS100 handheld optical talk set with dynamic range of 33dB. The high dynamic range ensures the quality of voice and long transmission distance.

Product

32 Channel Optically Isolated Digital Card

104-IDIO-16 Family

-

Acces I/O Products, Inc.

104-IDIO-16 Family - Acces I/O Products, Inc.

The Model 104-IDIO-16 is a 32-channel PC/104 utility board featuring 16 optically isolated inputs and 16 optically isolated solid state outputs. The isolated, non polarized inputs may be driven by either DC sources of 3-31V (or higher by special order) or AC sources at frequencies of 40Hz to 10KHz. Optically isolating the digital inputs from each other, and from the computer, assures smooth, error-free data transmission in noisy, real-world environments. The 16 input channels are available via a 34-pin IDC type header. The fully protected solid state outputs, capable of sourcing 2A each, are inherently more reliable than electromechanical relays and give system architects a more robust product to design with. The solid state outputs are available via a 50 pin IDC type header.

Product

Multiphoton Laser Scanning Microscope

FVMPE-RS

-

Olympus Corp.

FVMPE-RS - Olympus Corp.

The Olympus FVMPE-RS multiphoton imaging system is purpose-built for deep imaging in biological tissue, aimed at revealing both detail and dynamics. Innovative features for efficient delivery and detection of photons in scattering media enable high signal-to-noise ratio acquisition. This translates to bright images with precise details — even from deep within the specimen. High sensitivity is matched with high-speed imaging to capture rapid in vivo responses. For advanced applications, dual-wavelength excitation extending to 1300 nm is available. Independent control of visible or multiphoton laser light stimulation and the ability to synchronize with patch clamp data are also possible.

Product

Fiber Optic Cable Assemblies

-

Amphenol Fiber Systems International

Amphenol Fiber Systems International

For applications demanding reliability, traceability and the highest level of quality, a complete plug-and-play cable assembly directly from the manufacturer offers the highest degree of confidence. For these most demanding applications, AFSI specializes in manufacturing custom cable assemblies with quality components and industry-leading workmanship. AFSI is able to assist in designing and producing custom cable assemblies from a set of requirements or building to a customer print. Our highly skilled technicians are trained to a wide variety of industry standard procedures critical to manufacturing harsh environment fiber optic cable assemblies. All AFSI cable assemblies are manufactured by expert technicians in our state-of-the-art, AS9100 certified facility.

Product

Optical Measurement Methods and Characterization Services

-

Fraunhofer IOF

Fraunhofer IOF

The Fraunhofer IOF develops optical measurement methods and systems to customer requirements. Key areas include the characterization of optical and non-optical surfaces, coatings, components and systems in the micro and sub-nano range as well as 3D shape acquisition.

Product

Fourier Transform Optical Spectrum Analyzer, 600 - 1700 nm

OSA202C

-

Thorlabs, Inc.

OSA202C - Thorlabs, Inc.

Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines. Many commonly available OSAs use grating-based monochromators, which have slow acquisition times due to the need to mechanically scan the grating and average out noise at each wavelength. Thorlabs' OSAs acquire the spectrum via a Fourier transform using a scanning Michelson interferometer in a push/pull configuration. This approach dramatically improves the acquisition time, enables a high-precision wavelength meter mode with 7 significant figures and ±1 part-per-million accuracy, and allows the included software to provide robust statistical analysis of the acquired spectra, as explained in the Design tab.

Product

Scanning Droplet Cell

VS-SDC

-

Ametek Scientific Instruments

VS-SDC - Ametek Scientific Instruments

Scanning Droplet System (SDC) uses a compact peristaltic pump to force electrolyte through a small diameter tube and into a specifically designed head. This PTFE-based SDC head is machined to allow electrolyte to flow past an installed Reference Electrode and then to a port at the base of the head.

Product

Line Scan Sensors

-

ams-OSRAM AG

ams-OSRAM AG

The CMOS line scan image sensor family from ams consists of 23 variants, offering a range of resolution and pixel size specifications. Resolution options range from 2kpixels up to 16kpixels and line rates extend up to 80,000 lines/s.

Product

- Optical / RF Converter

OPT 80

-

Unaohm Start S.r.l.

OPT 80 - Unaohm Start S.r.l.

Calibrated measurement of the optical power of satellite and terrestrial TV signals distributed in optical fiber Calculation of optical signal losses on distribution Measurement of digital parameters (BER - MER - NM etc.) of optical signals converted into RF Visualization of optical carriers in RF Field Metric Spectrum Analyzer Power Meter Optical Field Meter Display Optical RF Power Supply Line Link Meter (LNB power supply ) Optical LNB power supply 13V 500mA with short circuit and overload managementAcquisition of optical measurements using the field meter Data Logger Option: certification of the OPT80 calibration and optical power measurements

Product

Plastic Optical Power Meter

POFPM100

-

Shanghai Tarluz Telecom Tech Co., LTD

POFPM100 - Shanghai Tarluz Telecom Tech Co., LTD

POFPM100 POF OPM used for the plastic optical fiber within 600 ~ 1000nm wavelength range, w, dBm units, five calibration wavelengths.

Product

1550nm Direct Modulated AGC Optical Transmitter

HT1500A

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HT1500A - Hangzhou Huatai Optic Tech. Co., Ltd.

External modulation technology, with the laser working in direct current, has the advantages of no laser chirp, low dispersion distortion, large extinction ratio, and high speed. It also has the disadvantages of high cost and high difficulty in manufacturing.

Product

Line Scan Cameras

-

JAI A/S

JAI A/S

JAI’s extensive product offering includes color line scan cameras featuring prism technology with multiple CCD or CMOS linear sensors delivering high performance color/NIR imaging solutions for high-speed web/continuous applications such as print verification, tile inspection, food/fruit sorting, and more. Also monochrome line scan cameras with ultra fast scan rates.

Product

Sensors & Optical Devices

-

Panasonic Automotive & Industrial Systems Europe GmbH

Panasonic Automotive & Industrial Systems Europe GmbH

Panasonic manufactures a complete lineup of sensors for full-body tracking and gesture recognition, occupancy detection, light intensity, acceleration, object detection, and pressure measurement.

Product

Metallurgical Microscope

BXJ900 Series

-

Nanjing Kozo Optical and Electronical Instrument Co., Ltd.

BXJ900 Series - Nanjing Kozo Optical and Electronical Instrument Co., Ltd.

LCD Metallurgical microscope is one new microscope, it is suitable to observe the sample while with the sharp image.

Product

Optical Switch

-

Shenzhen Golight Technology Co.,Ltd

Shenzhen Golight Technology Co.,Ltd

Optical switch is an instrument with optical path switching and optical channel expansion function. It can integrate different types of optical switch devices such as mechanical, MEMS, electrooptical, and magneto-optical according to user requirements.