Teledyne Gas & Flame Detection
Teledyne Gas and Flame Detection uses its global capability, manufacturing excellence, and custom engineering to provide end-to-end gas and flame detection solutions for a wide range of hazards worldwide. With an industry-leading, comprehensive portfolio of products and services, our commitment to cross-platform integration provides protection for today and confidence for tomorrow.
- +(1) 713-559-9200
,
United States of America
-
product
Alarms
IP66 Series
Teledyne Gas & Flame Detection
The IP66 Series of Models A-IP66, V-IP66 and AV1-IP66 consist of an audible sounder (A), a visual beacon (V) or a combination of the two (AV1).All of these options come in impact resistant plastic housings that are rated to IP66 for dust and water ingress protection.The visual warning beacon comes in field interchangeable lens colors of amber, blue, clear, green, red, yellow and magenta.
-
product
Industrial Gas Detector
OLCT 60
Teledyne Gas & Flame Detection
The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 in the case of the intrinsically safe (IS) version. The detector units are made of 316L stainless steel, and are rugged and resistant to corrosion. Pre-calibrated sensors can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated outside hazardous areas.The OLCT 60 is equipped with non-intrusive access to a safe menu. In hazardous areas, calibration can be done with an operating mode in accordance with safety rules.
-
product
Low Power Wireless Gas Detector
CX
Teledyne Gas & Flame Detection
Model CX sensors are equipped with standard analog 4-20mA, and Modbus™ RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector (optional) in applications where power is unavailable or not economically feasible.CX gas detection sensors are easily and economically deployable in both permanent and temporary installations. These low power sensor assemblies utilize electrochemical technology for a long list of toxic gases.
-
product
Fixed Digital Gas Detector
OLCT 10N
Teledyne Gas & Flame Detection
The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response.All transmitter information is received by the controller in less than 1 second.Non-intrusive operator interface requires only a simple magnetic wand and allows one man calibration without opening the enclosure.
-
product
Hazardous Area Gas Detector
Meridian
Teledyne Gas & Flame Detection
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic gas detector. The Meridian gas detector accepts all sensor types in one detector. Simply attach the specific toxic or combustible sensor to the universal detector head and the Meridian gas detector will automatically determine the type of gas to be detected. Installation of the sensor is a simple plug-and-play action. At Teledyne Gas and Flame Detection, we are always looking to anticipate your future needs. We designed the Meridian gas detection platform to be future proof, allowing you to take advantage of new sensing technologies from Teledyne Gas and Flame Detection while maintaining ease of use and peace of mind.
-
product
Personal Safety Gas Monitors
Teledyne Gas & Flame Detection
Want to protect your staff with high-end portable gas detectors? Discover Teledyne Gas and Flame Detection gas detection solutions.
-
product
Area Gas Detectors & Wireless Solutions
Teledyne Gas & Flame Detection
Discover the performance of Teledyne Gas and Flame Detection’s wireless gas detection beacons. Our equipment allows you to secure a very wide working area regardless of the field of work.
-
product
Portable Gas Leak Detector
Oxygas 500
Teledyne Gas & Flame Detection
The Oxygas 500 compliments the Gascoseeker 500 with a similar performance, measuring % LEL and % volume flammable hydrocarbons, but with the addition of oxygen for either gas/air or gas/nitrogen/air purging. The Oxygas 500 has the following additional features; automated zero during start-up, manually selectable purge mode.The P-500 variant has an additional part per million (ppm) range of methane.The Oxygas 500 is easy to use with very simple training, as the operation of the instrument follows the operation of the purge cycle. The rugged design allows the Oxygas 500 to be used in harsh environments. The instrument is also fully compatible with our range of calibration software and equipment.
-
product
Gas & Flame Detection System
Syntel
Teledyne Gas & Flame Detection
Syntel is an addressable loop system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. It includes a standard OPC interface and can also be supplied by Modbus allowing easy integration with third party systems.Syntel stores alarm and calibration information in distributed non-volatile memory, hence there is no reliance on a centralized system.Syntel is ideal for installations where there is the possibility for future expansion. The system architecture allows very low cost expansion as cable runs to a central location are not needed.
-
product
Fire, Gas & Intruder Controllers & Alarms
MultiSafe-MX
Teledyne Gas & Flame Detection
The MultiSafe-MX system is intended for the protection of high hazard, high risk plant and facilities.The MultiSafe-MX is certified, by European laboratories, to comply with the applicable regulations.The panel is composed of dedicated cards, installed in 19” racks which have their own “intelligence”, programmed for active/passive fire protection, gas detection, intruder alarm and logic functions. Moreover, the MultiSafe-MX can interact with supervisory and SCADA systems via Ethernet, TCP/IP or Modbus.The MultiSafe-MX interfaces with devices using either conventional and/or addressable module inputs and outputs. These modules are used to tailor the system to customer requirements.
-
product
Portable Gas Measurement Devices
Teledyne Gas & Flame Detection
Looking for portable gas leak detectors to protect your staff? Teledyne Gas and Flame Detection measuring devices meet all your requirements.
-
product
Wireless Controller
Site Sentinel
Teledyne Gas & Flame Detection
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 devices and consist of any combination of wireless and/or wired sensors, one or more HMI panels and optional solar panels. Additional sensors and/or remote alarm stations on tripods can be added as needed to assure widespread alert to site personnel.
-
product
Wireless Gas Detector
OLCT 80W
Teledyne Gas & Flame Detection
Teledyne Gas and Flame Detection is proud to introduce its wireless system with the OLCT 80 field detector/transmitter. This new model allows wireless connectivity in ATEX 1 zones. The maximum range is 3km, line of sight. The type of network selected will depend on the number of field detectors, the area coverage and the network architecture.
-
product
Gas Detection Controller
MX 43
Teledyne Gas & Flame Detection
Fully scalable, and designed to functional safety performance level 1 standards, the MX 43 is an analog and digital controller that continuously measures and controls gases in the atmosphere. The MX 43 gas detector manages both digital lines and analog channels, and covers all needs for a wide variety of gas monitoring applications. The MX 43 digital technology allows up to 32 detectors to be distributed on 8 lines for increased cost savings.
-
product
Gas Leak Detector
Gasurveyor 500
Teledyne Gas & Flame Detection
The Gasurveyor 500 is the most flexible range of gas detectors available from GMI. By simple selection of hardware and software options, the instrument can be readily configured to suit your exact application. Offering highly accurate and reliable instrumentation in an extremely robust, anti-static case, the Gasurveyor 500 Series measures gases common in many applications.Any combination of flammable gas from parts per million (ppm) through Lower Explosive Limit (LEL) to percent volume, oxygen, carbon monoxide and hydrogen sulphide can be selected to ensure that your exact requirements are met. All of the Gasurveyor 500 Series are dual mode instruments, making them suitable for both surveying work and confined space.
Parent
-
Teledyne Technologies Incorporated
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Siblings
-
Teledyne FLIR
A world leader in the design, manufacturing, and marketing of thermal imaging and stabilized camera systems for a wide variety of thermography and imaging applications including condition monitoring, research and development, manufacturing process control, airborne observation and broadcast, search and rescue, drug interdiction, surveillance and reconnaissance, navigation safety, border and maritime patrol, environmental monitoring and land-based security.
Siblings
-
Teledyne Advanced Pollution Instrumentation
Teledyne API (TAPI) designs and builds precision air quality and industrial gas monitoring instrumentation at our factory located in San Diego, California, USA. Our products are used worldwide in ambient air quality monitoring systems (AQMS), continuous emissions monitoring systems (CEMS), and industrial process applications.
Siblings
-
Teledyne Marine Benthos
Teledyne Benthos designs and manufactures rugged and reliable oceanographic instrumentation and sensor solutions for marine environments. Teledyne Benthos product lines include: acoustic communications, acoustic recovery and acoustic positioning technology.
Siblings
-
Teledyne DALSA
DALSA Corporation is an international high performance semiconductor and electronics company that designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing specialized wafer foundry services.
Siblings
-
Teledyne e2v
Teledyne e2v is a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace, defence, and industrial applications.
Siblings
-
Teledyne ICM
At ICM, we have more than 20 years of expertise that has been fully dedicated to the development, manufacturing and marketing of highly innovative portable X-Ray solutions. Nowadays, this know-how is used throughout the world in a wide range of applications and products. This includes its use for Non Destructive Testing applications, such as of welding inspections, as well as for such security functions as the scanning of suspect objects. We are proud to say that ICM’s products always deliver accurate, clear and reliable results.
Siblings
-
Teledyne LeCroy quantumdata
Leading provider of innovative solutions for testing emerging video technologies.
Siblings
-
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Siblings
-
Teledyne RF & Microwave
Teledyne RF & Microwave Solutions (RF&M) has over 50 years of experience in the design, development, and manufacture of sophisticated microwave/RF components and integrated assemblies for the most demanding challenges. Our products are sought after by civilian and military organizations spanning numerous markets, including Aviation, Communication, Electronic Warfare (EW/ECM/CIED), Industrial, Missile/UAV, Radar, Satcom, Space, and Test and Measurement. Our product portfolio is one of the most comprehensive RF/MW product lines in the world.
Siblings
-
Teledyne Leeman Labs
We are a company of scientists, engineers, and service professionals that are truly passionate about what they do, and that's atomic spectroscopy. Producing world-class instruments for elemental analysis is our mission. Our goal - through continuous innovation, dedication, and fresh thinking - is to constantly raise the bar, providing scientists and analysts with cutting edge instruments that deliver extraordinary results.
Siblings
-
Teledyne Marine Oceanscience (Obsolete)
Teledyne Oceanscience supplies the hydrologic and hydrographic community with deployment platforms for environmental monitoring and survey instrumentation. We manufacture remotely-controlled unmanned surface vehicles (USVs) for echo sounders and ADCPs. We also manufacture turnkey remote hydrographic survey boat systems, typically including environmental monitoring or bathymetry equipment, GPS positioning and data telemetry.
Siblings
-
Teledyne Marine Odom Hydrographic
2015 marked a milestone of 30 years of manufacturing echosounding equipment, Teledyne Odom Hydrographic (formerly Odom Hydrographic Systems) continues its legacy of unwavering dedication to the principles of customer service and product innovation. With over five thousand echosounders produced and distributed worldwide, Teledyne Odom Hydrographic has established an enviable high standard for product reliability and customer service that is unmatched.
Siblings
-
Siblings
-
Teledyne Marine RD Instruments
Teledyne RD Instruments was founded in 1982 and revolutionized the industry through the development of the first acoustic Doppler current profiler (ADCP). Now a part of the Teledyne Marine group, Teledyne RD Instruments continues to be an innovative force in the industry by designing, improving and manufacturing, proven solutions for current profiling, wave measurement, and precision navigation. With a staff of over 100 scientists, engineers, technicians, and sales and support personnel, the company's San Diego-based global headquarters is an 80,000 square-foot ISO-9001:2008 facility that includes state-of-the art engineering, laboratory, manufacturing, and test areas.
Siblings
-
Teledyne Marine RESON B.V.
Teledyne RESON, together with Teledyne BlueView and Teledyne Odom Hydrographic make up the Teledyne Marine Acoustic Imaging Group (TMAIG). We develop some of the world's most sophisticated sonar technology. The group offers the strongest collective product portfolio in the market for subsea acoustic imaging and multibeam echosounder solutions.
Siblings
Siblings
-
Teledyne Photometrics
Teledyne Photometrics designs and manufactures high performance Scientific CMOS, CCD and EMCCD cameras that support demanding, quantitative bio-research. The original architect of the first scientific-grade EMCCD, Teledyne Photometrics maintains its leadership role with the release of it’s award winning Prime, the sCMOS camera with built-in computational intelligence for image restoration, and Prime 95B, the industry’s first Scientific CMOS camera with 95% Quantum Efficiency for the highest sensitivity available. More recently, the company expanded it’s CMOS camera offerings to include the Prime BSI Scientific CMOS and the Iris 15 Scientific CMOS cameras.
Siblings
-
Teledyne SP Devices
Teledyne SP Devices designs, develops, and manufactures world-leading modular data acquisition and signal generation instruments. As a part of the Teledyne family with over 15 500 employees worldwide, we have access to some of the industry's most knowledgeable experts, research and development capabilities, and manufacturing facilities worldwide.
Siblings
-
Teledyne Princeton Instruments
Teledyne Princeton Instruments (TPI), a business unit of Teledyne Digital Imaging US, Inc, designs and manufactures high-performance CCD, sCMOS, ICCD, EMCCD, emICCD, and InGaAs cameras; spectrographs; and optics-based solutions for the scientific research, industrial imaging, and OEM communities. We take pride in partnering with our customers to solve their most challenging problems in unique, innovative ways. Teledyne Princeton Instruments has two U.S. manufacturing facilities, one located in New Jersey (Trenton) and one in Massachusetts (Acton). Our worldwide sales and service organizations in Germany, France, the United Kingdom, Japan, and China provide sales support and discuss application requirements in addition to being your local contacts for order processing and service.
Siblings
-
Teledyne Hanson Research
Hanson Research, an innovative leader in the design and manufacturing of dissolution testing and diffusion testing instruments for the pharmaceutical industry. Hanson Research, founded in 1951 by Dr. William A. (“Bill") Hanson, designed and manufactured the world's first six-vessel dissolution testers in 1969, and the first fully automated dissolution testing system, the Dissograph, in 1975. Widespread adoption of Hanson's technology along with an extensive support network made Hanson a trusted supplier for pharmaceutical development and manufacturing lab facilities in 75 countries worldwide. In the diffusion-testing line, focused on transdermal drug formulations, Hanson's innovative vertical diffusion cell, a modified Franz cell, led the way, eventually becoming officially incorporated into the United States Pharmacopoeia (USP) as “Apparatus A." Hanson's Microette™ automated diffusion testing system was first released in 2000, and an advanced design in 2014.
Siblings
-
Teledyne Princeton Instruments (Obsolete)
Teledyne Princeton Instruments (TPI), a business unit of Teledyne Digital Imaging US, Inc, designs and manufactures high-performance CCD, sCMOS, ICCD, EMCCD, emICCD, and InGaAs cameras; spectrographs; and optics-based solutions for the scientific research, industrial imaging, and OEM communities. We take pride in partnering with our customers to solve their most challenging problems in unique, innovative ways. Teledyne Princeton Instruments has two U.S. manufacturing facilities, one located in New Jersey (Trenton) and one in Massachusetts (Acton). Our worldwide sales and service organizations in Germany, France, the United Kingdom, Japan, and China provide sales support and discuss application requirements in addition to being your local contacts for order processing and service.
Siblings
-
Teledyne Marine
Teledyne Marine is a group of leading-edge subsea technology companies that are part of Teledyne Technologies Incorporated. Through acquisitions and collaboration over the past ten years, Teledyne Marine has evolved into an industry powerhouse, bringing Imaging, Instruments, Interconnect, Seismic, and Vehicle technology together to provide total solutions to our customers. Each Teledyne Marine company is a leader in its respective field, with a shared commitment to providing premium products backed by unparalleled service and support.
Siblings
-
Teledyne Marine AG Geophysical Products
AG Geophysical supplies the world’s marine seismic fleet with the highest quality submersible connectors engineered to work in the most hostile of working environments. AG Geophysical has built a reputation for solid engineering, performance that excels in the ocean’s depths and a reliability that won’t crack under pressure. As a company, our methods of production, quality assurance, technical support and service remain unparalleled in the marine seismic sector.
Siblings
-
Teledyne Marine BlueView
Teledyne BlueView is a worldwide leader in 2D imaging and 3D scanning sonar technology. The company’s advanced sonar systems are currently deployed on AUVs, ROVs, surface vessels, fixed positions, portable platforms, and have been adopted by leading manufacturers and service providers to support mission-critical operations.
Siblings
-
Teledyne Marine Bolt
Teledyne Bolt is a leading worldwide developer and manufacturer of seismic energy sources used in offshore seismic exploration for oil and gas.
Siblings
-
Teledyne Marine Bowtech
Teledyne Bowtech specialises in the design and manufacture of underwater vision systems including: video inspection systems, underwater cameras, underwater LED lights, xenon emergency relocation strobes, custom moulded cable assemblies, pan and tilts, electrical and fibre-optic connectors, fibre-optic multiplexers and slip rings for use in hazardous areas or subsea.
Siblings
-
Teledyne Marine Cable Solutions
Teledyne Cable Solutions is comprised of Storm Cable and VariSystems, an integrated alliance supplying engineered solutions to challenging cable situations. TCS provides application-specific, multi-core cable and ruggedized assemblies for a variety of industries.
Siblings
-
Teledyne Marine Cormon
Teledyne Cormon designs and manufactures subsea and surface erosion and corrosion sensors, as well as flow assurance monitoring systems.
Siblings
-
Teledyne Marine DGO
Teledyne DGO designs connection systems that transmit signals, data or power through challenging media, such as subsea oil wells, and through pressure barriers, such as the hull of a submarine. Because the cost of failure is so high, Teledyne DGO designs and manufactures its products to deliver total reliability. We engineer and manufacture our products as if lives and fortunes depended on them. Because they do. Teledyne DGO designs and manufactures systems to transmit signals, data and power in applications where failure to perform may contribute to substantial lost revenue, aborted missions or even loss of life: •Aircraft •Biomedical devices •Deep-sea exploration vehicles •Offshore oil and gas operations •Power generation, including nuclear power •Submarines
Siblings
-
Teledyne Marine Geophysical Instruments
Teledyne Geophysical Instruments has earned a strong reputation in the industry for delivering high-quality marine seismic exploration products. Our products are used aboard more than one-third of all commercial seismic research vessels.
Siblings
-
Teledyne Marine Impulse
Teledyne Impulse designs and manufactures high reliability electrical and optical interconnection systems, motorized power transfer switches, and custom insert molded compression connectors for a broad range of harsh environment applications. The company’s products are proven performers in the most demanding applications, which include oceanographic exploration, spacecraft and launch vehicles, defense, oil and gas production, nuclear systems, and wastewater management.
Siblings
-
Teledyne Marine Impulse-PDM
Teledyne Impulse-PDM designs and manufactures underwater connectors and harnesses for harsh environments. Impulse-PDM has over 30 years experience in mechanical, electrical, and optical design, as well as considerable expertise in material selection for subsea applications.
Siblings
-
Teledyne Marine Oceanscience
Teledyne Oceanscience supplies the hydrologic and hydrographic community with deployment platforms for environmental monitoring and survey instrumentation. We manufacture remotely-controlled unmanned surface vehicles (USVs) for echo sounders and ADCPs. We also manufacture turnkey remote hydrographic survey boat systems, typically including environmental monitoring or bathymetry equipment, GPS positioning and data telemetry.
Siblings
-
Teledyne Marine ODI
Teledyne ODI provides subsea electrical and fiber optic interconnect systems for the harshest environments and at any ocean depth. Wet mateable connectors include signal and high-power electrical, fiber optic, and hybrid electro-optical products all based on patented oil-filled, pressure-balanced technology. Dry mate submersible connectors also provided.
Siblings
-
Teledyne Marine Seabotix
The Seabotix vectored Little Benthic Vehicle (vLBV) is the ultimate MiniROV with over 1600 units sold over 20 years to every corner of the world. The vLBV300 system offers features for use in a full range of applications, industries, and environments. SeaBotix ROVs are industry accepted and field-proven in real-world conditions around the globe.
Siblings
-
Teledyne Marine PDS
Teledyne PDS is a multipurpose software platform and supports a wide range of tasks within Hydrography, Dredge Guidance, Construction Support, Search & Recovery Operations and Port Entrance Monitoring.
Siblings
-
Teledyne Marine Real Time Systems
Teledyne Real Time Systems provides seismic source synchronizing equipment to the global seismic data acquisition community.
Siblings
-
Teledyne Marine TSS
Teledyne TSS is a world leader in the design, manufacture and support of marine products for applications including navigation, motion compensation, platform stabilisation, and subsea pipe and cable survey. The company has specialist sales and support worldwide through a comprehensive network of distributors and service providers.
Siblings
-
Teledyne Webb Research
Teledyne Webb Research designs and manufactures scientific instruments for oceanographic research and monitoring. Teledyne Webb Research specializes in three areas of ocean instrumentation: Neutrally buoyant, autonomous drifters and profilers, autonomous underwater gliding vehicles, and moored underwater sound sources.
Siblings
-
Teledyne Lumenera
Teledyne Lumenera, part of the Teledyne Imaging Group, is a leading developer and manufacturer of high performance digital cameras and custom and OEM imaging solutions used worldwide for industrial and scientific applications.
Siblings
-
Teledyne e2v (Obsolete)
eledyne e2v is part of the Teledyne Imaging group of leading-edge companies aligned under the Teledyne umbrella. With unrivalled expertise across the spectrum and decades of experience, the collective of Teledyne Imaging offers world-leading technology and exceptional capabilities in sensing and synthesis, helping you capture better data and analyze it for better decisions.
Siblings
-
Teledyne AnaFocus
Teledyne AnaFocus is a supplier of standard off-the-shelf and customized high performance, high quality vision and CMOS sensor technology for the industrial, professional, scientific, medical and high end surveillance markets.
Siblings
-
Teledyne Defense Electronics
From advanced RF/Microwave systems to Hi-Voltage Interconnects & Components to comprehensive Space-qualified offerings and aerospace materials, our portfolio is sought after by technology leaders large and small worldwide. Leveraging the capabilities and the unique breadth of our many leading Teledyne Defense Electronics brands, we engineer solutions to meet your most complex specifications.
Siblings
-
Teledyne RF & Microwave (Obsolete)
Teledyne RF & Microwave has more than 50 years experience in the design, development, and manufacture of sophisticated components and integrated microwave assemblies optimized for the most demanding applications and harshest operating environments, from deep sea to space.
Siblings
-
Teledyne Relays
Teledyne Relays is Everywhereyoulook™, providing switching solutions for aviation, test & measurement equipment, industrial control, and military & space applications. With bandwidths from DC - 18GHz and signal integrity up to 40Gbps, Teledyne’s ultraminiature surface-mountable relays are perfect for high frequency and high throughput applications. Teledyne Relays offers industrial solid state relays for precise heating, lighting and motor control. For extreme environments and integration into ultraquality military systems, Teledyne offers military solid state relays.
Siblings
-
Teledyne Storm Microwave
Teledyne Storm Microwave has been providing high-quality interconnect products and cable assemblies to domestic and international defense, space and telecom markets since 1978.
Siblings
-
Teledyne Lincoln Microwave
Serving Defense, Space and Commercial sectors worldwide, Teledyne Defense Electronics (TDE) offers a comprehensive portfolio of highly engineered solutions that meet your most demanding requirements in the harshest environments. Manufacturing both custom and off-the-shelf product offerings, our diverse product lines meet emerging needs for key applications for avionics, energetics, electronic warfare, missiles, radar, satcom, space, and test and measurement.
Siblings
-
Teledyne Paradise Datacom
Teledyne Paradise Datacom, a division of Teledyne Defense Electronics, LLC, designs, manufactures and sells satellite modems, solid state power amplifiers (SSPA), block up converters (BUC) and associated redundancy subsystems. We deliver satellite communications products around the world.
Siblings
-
Teledyne Analytical Instruments
Teledyne Analytical Instruments (TAI) is a world leader in the design and manufacturing of high quality gas and liquid analyzers with a product line that includes: electrochemical sensors, analyzers and custom systems which combine expertise in electronics, chemistry and engineering. Our products and services cover many industries including: air separation/bulk industrial gas manufacturing, chemical and petrochemical processing, cement, metals and metal processing, oil and gas, medical/pharmaceutical, nuclear, power generation, pulp and paper, safety, semiconductor/ electronics and steel. With over 50 years of experience, TAI's mission is to meet the industry's varied requirements for gas and liquid analysis. In addition, detailed attention to our customers' needs and dedication to the highest standards of performance and quality are just some of our top priorities. These standards are enhanced by our ISO 9001:2015 certification.
Siblings
-
Teledyne OEM Solutions
SSI and CETAC join forces to leverage our liquid management expertise and automation solutions to deliver a one source solution that satisfies the needs of global instrument manufacturers (OEMs). Decades of serving OEMs with innovative solutions, using advanced technologies, over a broad spectrum of techniques (ICP to HPLC…) with a team that has a true passion to exceed our OEM customers' expectations.
Siblings
-
Teledyne Hastings Instruments
Teledyne Hastings Instruments is a trusted manufacturer of a wide range of quality Vacuum Instruments and Gas Mass Flow Instruments . Our vacuum product line includes the original DV-4 and DV-6 thermocouple gauge tubes, along with other vacuum sensors used in combination with meters and controllers that cover a wide range of vacuum pressure from atmosphere to ultra high vacuum. The gas mass flow line of meters and controllers cover a broad range of flow rates from 5 sccm to 15,000 slm that includes a variety of flexible options for outputs, calibration, and fittings.
Siblings
-
Teledyne ISCO
ISCO, Inc., was founded in 1958, and since its inception has been headquartered in Lincoln, Nebraska, USA. Through our focus on designing and building products to meet specialized customer needs, the company grew from founder Dr. Robert Allington's garage into its current 200,000 square foot plant. In June of 2004, Isco was acquired by Teledyne Technologies, Inc., becoming Teledyne ISCO and beginning a new chapter in the company's story. Today, Teledyne ISCO manufactures a wide range of products for professionals working in water pollution monitoring and abatement, engineers and managers involved with wastewater process control, and scientists involved in field and laboratory work. We have always taken pride in the fact that the products we produce are used by our customers to improve the quality of life on Earth. Benefits realized from the use of ISCO products range from maintaining a clean environment, to developing disease-curing drugs and finding new energy supplies.
Siblings
-
Teledyne Monitor Labs
Teledyne Monitor Labs (TML) has more than 50 year’s global experience in the design and manufacture of continuous emission monitoring systems (CEMS), process monitoring, industrial sensors and instruments, ambient monitoring and software. Our services and products serve the following industries: power generation, oil/gas refining, petrochemical, cement, lime, pulp and paper, steel, chemical, and agriculture.
Siblings
-
Teledyne Tekmar
Teledyne Tekmar is a leader in the design and manufacturing of analytical instrumentation for the laboratory providing productivity-enhancing instrumentation and solutions to a number of industries. Our world-renowned product lines include Volatile Organic Compound (VOC) systems for Gas Chromatography (GC) Sample Introduction, High-Throughput Purge and Trap sample concentration and Sample Automation. The Total Organic Carbon (TOC) Analyzers provides unparalleled accuracy, precision, throughput and robustness for water samples.
Siblings
-
Teledyne LABS
Teledyne LABS is a collection of decades-old Teledyne brands contributing to the research, development and manufacturing of laboratory instruments and technologies used around the globe. You’re sure to recognize some or all of the entities comprising Teledyne LABS. After all, we’re Everywhereyoulook™:
Related
-
Teledyne Technologies Incorporated
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
