Electron Spectroscopy for Chemical Analysis
determine the atomic composition of a surface.
-
-
product
Localized Electrochemical Impedance Spectroscopy
VS-LEIS
The VersaSTAT 3F applies an AC voltage to the sample emerged in electrolyte. This "global" voltage generates AC current to flow at the electrode / electrolyte interface. A dual-element probe is positioned in solution close to the surface of the sample. The electrometer measures a differential voltage measure between the two measurement elements as a measure of local voltage-drop in solution. This voltage-drop exists in solution because of current flow from local reactions at the sample, the resistance of the electrolyte and the spatial separation of the dual measurement elements.
-
product
Atomic Spectroscopy
Agilent’s comprehensive atomic spectroscopy software portfolio leads the industry in the simple setup and productivity tools required by routine analytical laboratories, while also providing the flexibility needed for advanced method development in research and academia. Our advanced ICP-MS software, including the powerful ChemStation and MassHunter systems, are used in all of our mass-spec platforms, so you can benefit from a single solution and reduce staff training requirements. Our cutting edge ICP software also enables intuitive control in ICP-MS processes.
-
product
Electronic Cards
Our product range includes a wide range of PDBC Relay Card, Local Remote Selector Card, Monitor Card and Fuse Failure Relay Card.
-
product
Electronic Load
* Fully programmable, self-contained, air-cooled solid state load.* Patented design is optimized to provide ultra-low impedance operation for fuel cell testing.* Load is compatible with AC impedance or frequency response analyzers.* Interchangeable shunts for precise operation over a wide dynamic range.* Ten built-in cell voltage monitoring inputs optional. Additional voltage monitoring inputs available.* Ethernet Interface for simple configuration and expansion!* Combine with additional Fideris™ Innovator Series™ modules to create a fully-integrated,fully-automated, customized test system.* System-wide control of all Fideris™ Test System Components using FCPower™ Software,LabviewTM, or other programming language.* Integrated hardwired Run/Standby signal.
-
product
Scanning Electron Microscopy (SEM Analysis)
Rocky Mountain Laboratories, Inc.
Scanning Electron Microscopy (SEM Analysis) can produce images of almost any sample at magnifications of 15-300,000X. The SEM has tremendous depth of field allowing for imaging that cannot be accomplished using optical microscopy. Conductive and nonconductive samples can be imaged. When operated in the backscatter (BSE) detection mode, differences in material composition can be observed. Elemental analysis can be performed on any feature observed with an integrated Energy Dispersive Spectroscopy (EDS) detector.
-
product
Chemical Oxygen Demand (COD) Analyzer
PeCOD®
MANTECH’s revolutionary PeCOD® Analyzer technology provides accurate chemical oxygen demand (COD) results in 15 minutes — without the use of harmful chemicals including dichromate and mercury. Highly adaptable for wastewater and drinking water applications, the PeCOD® Analyzer’s patented nanotechnology-based approach to COD analysis will save you time and money while protecting the environment and the health and safety of your workers.
-
product
Flip-Flop Electronics
Analog Devices supplies a range of D type and T type flip flop products. Members of this portfolio can support data transmission rates up to 43 Gbps and clock frequencies as high as 43 GHz. All of our flip flop products are RoHS compliant and available in 3 × 3 or 4 × 4 SMT packages.
-
product
Gamma Spectroscopy
Gamma spectroscopy is the science (or art) of identification and/or quantification of radionuclides by analysis of the gamma-ray energy spectrum produced in a gamma-ray spectrometer.
-
product
High Speed Spectroscopy Camera
SynapsePlus CCD
Superfast electronics (up to thousands of spectra per second). Very low read noise. Best linearity in its class. Different chip types to suit every spectroscopy need. Open Electrode (OE) 1024 x 256 pixels, Front-illuminated UV enhanced (FIUV) - 2048 x 512 pixels, Front-illuminated visible (FIVS) - 2048 x 512 pixels, Back-illuminated UV enhanced (BIUV) - 1024 x 256 and 2048 x 512 pixels, Back-illuminated visible (BIVS) - 1024 x 256 and 2048 x 512 pixels, Back-illuminated deep depletion (BIDD) – 1024 x 256 pixels.
-
product
Acoustic Analysis
Includes cursor readout of dB bands, max & min lines, noise curve overlays, pink noise generator, and optional STC Transmission Loss.
-
product
Electronic Circuits
1. A complete laboratory training system. 2. Understanding the theory and application of basic electronnic circuits. 3. Suitable for both technician and beginner of electronic students.
-
product
Failure Analysis
A partial list of our state of the art test equipment, applicable to these testing disciplines, will include the following: Two Scanning Electron Microscopes with EDS (SEM/EDS) Three Differential Scanning Calorimeters (DSC) Three Thermogravimetric Analyzers (TGA) Three Thermo Mechanical Analyzers (TMA) One Dynamic Mechanical Analyzer (DMA) Two Real-Time Fluoroscopic X-ray Systems, including a Microfocus System One Fourier Transform Infrared Microscope (FTIR) (capable of identifying a single particle of an unknown material) Two Ion Chromatographs (IC) (capable of identifying ionic impurities in ppm)
-
product
N/Protein Analysis
Elementar Analysensysteme GmbH
The determination of the total protein content is an essential tool for quality control and protein declaration according to international labeling laws in the food & feed industry and research facilities. Since the protein content can directly correspond to product properties, highly precise, matrix-independent protein analyses are required in all application areas.Our N/protein analyzers use the high-temperature combustion method according to Dumas, which has clear advantages over Kjeldahl regarding laboratory safety, sample throughput, labor time, amount of chemical waste and thus cost-per-analysis. Our analyzers for the determination of nitrogen and protein are dedicated instruments serving today’s customer needs in regards to price-per-sample, throughput and sensitivity.
-
product
Electronic Units
Electronic units for field installation and mounting rack installation control the actuators. They are fed with 115 or 230 V AC. A local control panel allows for easy basic settings.
-
product
Electronic Loads
Chroma Systems Solutions, Inc.
Power conversion testing for automated test systems, LED drivers, power supply testing, battery testing, and much more.
-
product
Spectroscopy
Metrohm Instant Raman Analyzers
Handheld spectrometer for quick and easy identification of unknown substances
-
product
*Laser Spectroscopy
*Sum Frequency Generation (SFG) vibrational spectroscopy and microscopy*Investigation of surfaces and interfaces of solids, liquids, polymers, biological membranes and other systems
-
-
product
FTIR Analysis
Anton Paar offers state-of-the-art Fourier-transform infrared (FTIR) instrumentation with the possibility to automate and connect to other Anton Paar benchmark instruments. It combines FTIR spectroscopy with comprehensive data analysis to provide rapid results and increase efficiency in the laboratory. A high-resolution touchscreen with a user interface inspired by modern smartphones enables operators to conduct the most intuitive FTIR analysis available on the market. Anton Paar’s FTIR specialists and a worldwide service network are ready to support you with your spectroscopy applications.
-
product
Modal Analysis
The Modal Analysis package is part of m+p Analyzer, m+p international's dynamic signal analyzer for noise & vibration measurements and analysis. It provides a complete set of tools for observing, analysing and documenting the vibrational behaviour of machines and mechanical structures. Software modules are available for classical and operational modal analysis, shaker measurements (SIMO and MIMO) as well as for ODS, SDOF and MDOF analysis. A modal model validation module is also provided.
-
product
Raman Spectroscopy
Raman spectroscopy is a form of vibrational spectroscopy, like infrared (IR) absorption, that provides detailed chemical and structural characterisation. The Raman technique has the benefit of being non-destructive and requiring no sample preparation.
-
product
Chemical Emissions Testing
Underwriters Laboratories Inc.
As a global leader in the science of safety, UL evaluates products and materials to determine their impact on indoor air quality and, by extension, human health. Whether your products need to meet the emissions requirements of environmental certifications or regulations or you simply wish to have a better understanding of your products'''' potential impact on the indoor air for legal or risk assessment purposes, UL is your partner for developing healthier, lower emitting products.
-
product
ELECTRONIC MEGOHMMETER
MI-5500e
The MI-5500e general purposes megohmmeter is a truly portable equipment suitable to measure insulation resistances using test voltages up to 5 kV. It employs high-reliable, state-of-the-art technology for accurate measurements of ultra high insulation resistances up to 10.000.000 MΩ
-
product
Optical Components for Custom Spectroscopy
HORIBA offers a wide variety of optical accessories. We have optical choppers which pulse continuous light sources. Explore our order sorting filter wheels for spectrographs and monochromators. Choose from our optical fibers and light guides, with flexible light delivery, single fibers, fiber bundles, and liquid light guides. And select from our lens and mirror-based sample compartments.All of these accessories are compatible with our various optical components. Our optical accessories allow us to complete a custom solution for your unique configuration requirements and a variety of spectroscopy applications. HORIBA offers more choices to ensure you can select the best optics for your needs.
-
product
Custom Spectroscopy Solutions
Scientific discovery doesn’t always follow traditional pathways. The Optical Spectroscopy Division custom configures spectrometers, monochromators, microspectroscopy, CCD’s and other instruments for fluorescence spectroscopy and other R&D and QC applications. We design systems that meet your individualized research or application needs. We create the tools required to make investigations where standardized tools do not meet your needs or where no tools currently exist.
-
product
Impact Analysis
MetaDex™
Allows you to instantly see the impact of any changing data object or application on all downstream objects and applications.
-
product
Spectral Analysis
Quality Engineering Associates Inc.
QEA’s PSpec series of products is a new generation of hand-held, wireless, high-performance digital spectrometers that make spectral analysis easier and more convenient than ever before. With our PSpec devices the lab goes with you, enabling collection on the fly of objective, unambiguous data, whenever and wherever it’s needed. Built-in wireless connectivity via Bluetooth enables two-way communication with your smart, tablet or PC. PSpec devices include PC-based Excel application software for data logging, analysis and reporting. With PSpec you’ll enjoy a whole new world of state-of-the-art, mobile analysis tools at an affordable price. The PSpec series offers the perfect tool, whatever your application.
-
product
Failure Analysis
Failure Analysis (FA) plays a crucial role in the production of semiconductors. It provides process and design feedback to determine the root cause of any failures. Time-to-data for the FA Engineer is a critical measurement and SemiProbe’s Probe System for Life ® (PS4L) is ideally suited to excel in this application. All key components are interchangeable, making it easy to switch between individual die, wafers, and packaged parts.
-
product
Electron Microscope Analyzer
QUANTAX EDS for TEM
Long standing expertise in EDS ensures the configuration of the best solution for your specific microscope (STEM, TEM or SEM) thanks to slim-line detector design and geometrical optimization for each microscope pole piece and EDS flange type
