Code
See Also: Programming, Scripts
-
Product
Becker Transponder Test Fixture
TA-3400
-
This transponder test fixture is specific to the requirements for testing Becker Avionics Transponders and provides interface connectors for both the panel mount and remote systems. The panel also provides switches to implement Gillham code altitude as well as separate interfaces for an external parallel or serial encoder. The panel will interface with the RMU 5000 or standard control head. This fixture also comes with voltage and current meters along with an internal dimming source. This panel comes in the standard 19 inch rack width and measures 12 inches in depth.
-
Product
In-depth Execution Time Analysis For Critical Software
RapiTime
-
*Timing analysis (inc. WCET) for Ada, C & C++ on-target & host**Identify code to optimize for worst-case behavior*Debug rare timing events*Simplify verification through integration with your CI tool*Produce evidence for DO-178 and ISO 26262 certification
-
Product
High-Performance Test Connector Probe TC-H 201
1023687
-
The TC-H 201 probe is a high-performance test connector designed for precision testing in various applications. This device, identified by order code 1023687, falls under the TC-H family, known for its reliability and accuracy in providing exceptional results. The design of the TC-H 201 ensures that it meets the rigorous demands of testing environments while maintaining a user-friendly interface.
-
Product
MIL-STD-1553 Test & Simulation Interface for VME
VME-1553
-
Avionics Interface Technologies
Dual redundant, single, dual, or quad stream configurationsTransformer & Direct Bus Coupling - Concurrent Bus Controller, 31 Remote Terminals, & Bus Monitor operation - Full error injection and detection - Multi-level trigger for capture and filtering - IRIG-B time code encoder/decoder - Ten high voltage (up to 30V) programmable DIO lines - Real-Time recording and physical bus replay - ANSI Application interface supporting C, C++, C#, and .NET development - Device driver support: Windows, Linux, & VxWorks (others on request) - Designed for extended temperature operations - 64-bit VME Interface (VME master & slave capability) - Front Panel and Rear I/O (P2) Available
-
Product
Cable Assembly 15-Pin D-Type, Male to Unterminated With Cut Ends, 2m
A015DM5-C-0A200
Cable Assembly
The 15-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper Wire. The connector can be secured to the associated product by screwlocks. The unterminated connections are coded to match the connector pin designation. When using this product additional cable strain relief arrangements may be necessary and appropriate electrical safety precautions should be observed.
-
Product
07 THT Vertical | Threaded | With Shaft
07-3xxx-20/30xxx
-
Compact coded switch with a fastening torque of nut M6 x 0.75, HEX, Gray or BCD coding, up to 16 position, up to 3.5 Ncm switching torque and perfect for rugged environments
-
Product
20-Pin GMCT Cable, Male to Unterminated, Tinned Ends, 10A, 1m
A020GMR-T-0C100
Cable Assembly
The 20-Pin GMCT cable assembly is constructed from 19/0.254 (18AWG) Tinned Copper Wire with PFA insulation. Screwlocks are provided to secure the connector to associated product. The unterminated connections are coded to match the connector pin designation. Users may need to make their own cable strain relief arrangements when using this product and should ensure appropriate electrical safety precautions are observed.
-
Product
Test Solution
Eye-BERT MicroX
-
The Eye-BERT MicroX is a compact, easy to use test solution offering high performance bit error rate testing at a fraction of the cost of competing solutions. The unit is offered in two speed grades including the X10 which operates up to 14.5Gbps, and the X30 which extends the data rate to 29Gbps. Its broad data rate capabilities and long test patterns make this unit suitable for testing nearly all optical SFP, SFP+, and SFP28 transceivers in production with just one unit. The real-time eye opening monitor and eye scanning capability can aid in troubleshooting by providing the operator with additional link quality information. Other features include Autonomous pattern detection, SFP diagnostic tools, and wavelength tuning (per transceiver capability). With a click of a button the Eye-BERT MicroX will automatically test an SFP module based on its advertised capabilities and generate a detailed test report complete with manufacturer, part number, serial number, date code, fiber type, link length, speed, and test results. The Unit is supplied with anti-skid bumpers and is small enough to be integrated into larger systems for dedicated link verification.
-
Product
Basic Contact Probes (100 Mil) F77210S063N150
1001559
-
The Basic Contact Probes (100 mil) F77210S063N150, identified by order code 1001559, are essential components engineered for precision in various electrical applications. Designed to operate efficiently within a temperature range of -45°C to +80°C, these probes feature a robust construction that ensures reliability and durability. With a continuous current capacity of 5.00 A and a typical contact resistance of 25.00 mOhm, they deliver outstanding performance in demanding environments.
-
Product
Cable Assembly 68-Pin Micro-D Female to Unterminated, Tinned Ends, 1m, Spring Latch
A068SFR-T-5B100
Cable Assembly
The 68-Pin Connector to Unterminated Cable Assy is constructed from 7/36 (28AWG) twisted pair wires with polypropylene insulation. The wires are colour coded to match the connector pin designation. The connector can be secured to the product by a Metal Spring Latch.
-
Product
Cable Assembly 15-Pin D-Type, Male to Unterminated With Ferrules, 2m
40-972-015-2m-MU
Cable Assembly
The 15-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper Wire. The connector can be secured to the associated product by screwlocks.The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot break when they are terminated. When using this product additional cable strain relief arrangements may be necessary and appropriate electrical safety precautions should be observed.
-
Product
Cable Assembly 68-Pin Micro-D Female to Unterminated, Ferrules, 0.5m
A068SFR-F-6A050
Cable Assembly
The 68-Pin Connector to Unterminated Cable Assy is constructed from 7/36 (28AWG) twisted pair wires with polypropylene insulation. The wires are colour coded to match the connector pin designation. The connector can be secured to the product by 2-56 UNC Screwlocks.
-
Product
Low Cost Emulator
EB-51
-
# Emulates 80C51 Microcontrollers and Derivatives# Real-Time Operation up to 40 MHz# 3.3V or 5V Voltage Operation# Source-Level Debugger for C, PLM and Assembler# DOS and MS-Windows Software# Support for ROMless and ROMed Microcontrollers# 64K of Code and 64K of Data Memory# Data Memory with Mapping Capabilities# Performance Analyzer# Real-Time and Conditional Breakpoints
-
Product
HV02G52B060N190-M
1119426
-
The HV02G52B060N190-M, designated under the order code 1119426, is a high-performance component specifically designed within the HV02 family. Notably, this model features a robust blend of engineering and materials, highlighting its suitability for various applications that demand reliability and precision. With a total length of 48.40 mm and a plunger constructed from durable brass plated in nickel, the HV02G52B060N190-M is engineered to withstand challenging environments while maintaining optimal functionality. Its compact design is marked by a tip style diameter of 12.00 mm, making it an ideal choice for constrained spaces.
-
Product
Cable Assembly, 9-Pin D-Type, Male to Unterminated With Tinned Ends, 2m, HV
A009DM5-T-HA200
Cable Assembly
A range of 9-Pin D-Type High Voltage cable assemblies with unterminated connections on one end, constructed from PTFE Type C insulated wire. The unterminated connections are coded to match the connector pin designation.
-
Product
Basic Contact Probes (100 Mil) F10006B130G300
1012286
-
The Basic Contact Probes (100 mil) F10006B130G300, with order code 1012286, are designed for high-performance applications requiring reliable electrical connections. With a small pitch of 2.54 mm and a temperature range spanning from -45°C to +80°C, these probes are suited for a variety of environments. They operate under a continuous current of 5.00 A and maintain a typical contact resistance of only 20.00 mOhm, ensuring minimal energy loss during operation. Built to withstand mechanical stresses, the probes exhibit a preload of 150.00 cN and spring force of 300.00 cN, making them durable for repetitive use.
-
Product
Switch Probe F88706B100G150S2
1034623
-
The F88706B100G150S2 Switch Probe, with order code 1034623, is designed for a variety of applications requiring high precision and reliability. This normally open (NO) switch probe features an advanced design that integrates seamless functionality with robust materials, making it an ideal choice for settings where performance and durability are crucial. Operating within a temperature range of -45°C to +100°C, this probe is suitable for demanding environments and its spring force of 150 cN ensures consistent contact and reliable operation in any scenario.
-
Product
Twist Proof Probes (F756) H756RD
1014219
-
The Twist Proof Probes (F756) H756RD, identified by order code 1014219, is designed for precision and reliability in various technical applications. These probes feature a critical pitch of 2.54 mm, ensuring optimal performance in connectivity and signal integrity. Their compact dimensions, including a total length of 30.50 mm and an outer diameter of 2.00 mm, make them an ideal choice for applications with space restrictions. The probes are engineered to withstand demanding mechanical stresses due to their internal thread specifications, enhancing durability and functionality in diverse environments.
-
Product
Socket Wrench FWZ733S1
1003954
-
The FWZ733S1 is an advanced tool within the category of threaded probes, specifically designed for precision applications. This versatile socket wrench is equipped with a tool size of 3 mm, making it an ideal choice for detailed tasks requiring high accuracy. Its robust design ensures reliability, setting a standard for professional and industrial users alike. The tools and equipment included in this range, such as the probe tool with order code 1000977-F73316B0070G300SP, enhance the functionality and versatility of the FWZ733S1, supporting an array of specialized applications.
-
Product
USB I/Q Arbitrary Waveform Generator, 3-channel, up to 1GHz I/Q bandwidth
Streamline P9336A
Arbitrary Waveform Generator
Balance deadlines, productivity, budget and bench space with the Keysight P9336A Arbitrary Waveform Generator (AWG), a member of Keysight’s Streamline Series. You’ll move confidently across every stage of your product’s development lifecycle by leveraging accurate and repeatable measurements, automated code capability, and a consistent, intuitive user experience.
-
Product
Nano-ITX SBC With Intel® Celeron® Processor J1900/N2807, LVDS/VGA/HDMI, Dual LANs And Audio
NANO842
-
The NANO842 Nano-ITX motherboard is designed to support the Intel® Celeron® processors quad-core J1900 and dual-core N2807 (code name: Bay Trail). A DDR3L SO-DIMM socket located on the bottom of the board can support up to 8GB of DDR3L memory. It can handle operating temperatures from -20°C to 70°C, and runs on +12V DC input. This 120 x 120 mm industrial embedded board comes with multiple display outputs: HDMI, LVDS and VGA with visual experiences enhanced for dual-view supported. The Axiomtek NANO842 is an ideal solution aimed at embedded, industrial, and IoT applications.
-
Product
Emulates Atmel AT89C51SND1
FE-SND1
-
* Emulates Atmel AT89C51SND1 * 62K Code Memory * Real-Time Emulation * Frequency up to 20MHz/3V * ISP and X2 Mode Support * MS-Windows Debugger For C And Assembler * Emulation Headers and Signal Testpoints * Programmer Included * Serially Linked to IBM PC at 115Kbaud
-
Product
Cable Assembly, 25-Pin D-Type, Male to Unterminated With Cut Ends, 2m
A026HM5-C-0A200
Cable Assembly
The 26-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 7/0.15 (26AWG) Silver Plated Copper Wire. The connector can be secured to an associated product by screwlocks. The unterminated connections are coded to match the connector pin designation. Please ensure appropriate electrical safety precautions are observed when using this product.
-
Product
Fine Pitch Probes (300µm - 500µm) FP380D0301B025G023L032
1127923
-
The Fine Pitch Probes (300µm - 500µm) FP380D0301B025G023L032, also known by the order code 1127923, are engineered with precision for high performance in various electronic testing applications. Featuring a double plunger probe design from the FP-D family, these probes are designed to meet rigorous standards for accuracy and reliability. With a pitch of 0.50 mm (20 mil), they offer superior electrical connectivity and durability, functioning optimally across a temperature range of -45°C to +120°C. The probes maintain a continuous current of 1.40 A with a typical contact resistance of 100 mOhm, achieving peak frequency performance at 29.30 GHz.
-
Product
Step Probes F73211B0048G150SP
1007336
-
The F732SP Step Probes are a precision component designed for robust testing applications, enhancing accuracy in electrical connections. With a pitch of 2.54 mm and capable of operating at temperatures ranging from -45°C to 100°C, these probes are engineered for versatility and durability in various environments. The step probes are part of the F73211B0048G150SP line, identified by order code 1007336, and offer superior contact integrity with a typical contact resistance of just 20 mOhm, accommodating a continuous current of up to 5 A without compromise.
-
Product
Vehicle Monitor
ScanGaugeII
-
ScanGaugeII can help you monitor your vehicle’s most vital systems and provide the kind of real-time information you’ve been missing. Features include more than 15 built-in digital gauges, 5 sets of trip data and an easy-to-use ScanTool that shows both set and pending trouble codes — All in an ultra compact design that installs in minutes.
-
Product
FCC Testing and Certification
-
Radiometrics Midwest Corporation
Radiometrics was one of the first labs in the country to receive acceptance by the FCC as an independent lab available for performing tests to the FCC Code of Federal Regulations.
-
Product
Basic Threaded Probes (F731) H731LA
1001844
-
The Basic Threaded Probes (F731) H731LA, with order code 1001844, is designed for precision applications requiring reliable connectivity and mechanical integrity. This probe features a brass shaft and incorporates advanced mechanical specifications, ensuring optimal performance and durability in various settings. The internal thread of M 1.4 and a flux-proof solder connection type make it suitable for specialized tasks that demand robust connections.
-
Product
8-Pin Power D-Type Cable, Female to Unterminated, Cut Ends, 1m
40-972-408-1m-FU
Cable Assembly
The 8-Pin Power D-Type Connector to Unterminated Cable Assy is constructed from PVC insulated 56/0.3 (12AWG) Copper wire. The connector can be secured to the product by screwlocks and the unterminated connections are coded to match the connector pin designation.
-
Product
Basic Contact Probes (138 Mil) H773DS-30
1010456
-
The Basic Contact Probes (138 mil) H773DS-30 is designed for precision measurement and high reliability in various applications. With an order code of 1010456, these contact probes are engineered to ensure optimal electrical connectivity while maintaining dimensional accuracy. The primary features of this model include a total length of just 3.00 mm and an outer diameter of 3.20 mm, making them compact yet efficient for effective operation in tight spaces.
