Product

Standard Directional Gyroscopes

4000B-series

-

Sigma Tek, Inc.

4000B-series - Sigma Tek, Inc.

The 4000B is our standard air-driven directional gyro. As the aircraft turns left or right, gears on the sensing unit and dial shaft translate this rotation into rotation of the instrument’s vertical dial. Left turns produce clockwise dial rotation and right turns produce counter-clockwise rotation. The gyro is controlled by a heading selector knob located on the lower left of the instrument. Pressing and turning the knob first disengages the dial shaft and then resets the dial to a new heading, which results in a new course indication. Releasing the selector knob re-engages the dial shaft. The on-course position of the pointer is always at the top of the azimuth circle (0° on the dial with the aircraft headed north).

Product

Two Channel Phase and Amplitude Noise Analyzer

DCNTS -190

-

Eastern-Optx

DCNTS -190 - Eastern-Optx

The DCNTS is a two channel Phase and Amplitude noise analyzer. Its dual demodulator architecture allows the system to use cross-correlation to cancel its internal noise and limitation; it is like comparing the outputs of 2 systems and only display the similarities while rejecting differences. Its main extension is the Residual Noise measurement front-end which includes all necessary hardware to automatically measure residual noise on 2-ports devices either in RF frequencies or microwave. It could be a frequency multiplier or divider, an amplifier or any other phase coherent input to output device.

Product

Industry Standard in GPR for Utility Mapping and Locating

GSSI’s Utility Scan Pro GPR

-

Geophysical Survey Systems, Inc.

GSSI’s Utility Scan Pro GPR - Geophysical Survey Systems, Inc.

With UtilityScan Pro, users can quickly identify and mark the position and depth of metallic and non-metallic objects; including utilities such as gas, communications and sewer lines as well as underground storage tanks and PVC pipes. Based on the SIR 4000 controller, the UtilityScan Pro provides the GPR professional with solutions to any underground locating situation.

Product

Rack Module with Standard Contactors without Anti-Harmonic filters

MOD Rack

-

Lifasa - International Capacitors, SA

MOD Rack - Lifasa - International Capacitors, SA

The MOD-RACK control units include, in a compact form, all the components necessary for the operation of a step of a standard capacitor bank. MOD-RACK modules are divided into two basic blocks: power block and control block. The two blocks are mounted in a small frame to be installed in an electrical panel.

Product

Coating thickness XRF Standards

-

Micromatter

Micromatter

We manufacture high accuracy reference standards capable of calibrating virtually any X-Ray Fluorescence (XRF) coating thickness and composition analysis system.

Product

Standard Capacitors

1408 Series

-

IET Labs

1408 Series - IET Labs

Ultra-high stability. The continuously improvingaccuracy of capacitor calibrations by NISTbrings a better knowledge of capacitance tostandards laboratories - provided, of course,the laboratories have adequate referencestandards. The 1408 Reference Standard Capacitors,with their high stability, are suitablefor calibration in parts in 107. The 1616 PrecisionCapacitance Bridge is highly recommendedfor accurate calibration of a wide range ofworking standards from such a reference.

Product

Mechanical Tunable Phase Shifters

-

ERAVANT

ERAVANT

The phase shifter features a high resolution precision micrometer which allows for finer adjustment sensitivity than a standard micrometer. The phase shifter is an ideal piece of equipment in waveguide systems where broadband phase shifting is required. The phase shifter exhibits a 2.5 dB typical insertion loss and an adjustable phase range of up to 180 degrees.

Product

European Standard for Remote Reading of Measuring Devices

M-Bus

-

HMS Networks

M-Bus - HMS Networks

M-Bus (Meter-Bus) is a European standard for remote reading of measuring devices. M-Bus is predominantly used in buildings, for example in electricity meters, gas meters, water meters or other types of consumption meters. It is also used for various sensors and actuators.

Product

Conformance Calibration Standard Test Card for GS1-DataBar Symbol Verifiers

AI-CCS-DATABAR

-

Applied Image, Inc.

AI-CCS-DATABAR - Applied Image, Inc.

This test card is ideal for testing verifiers, scanners, and other GS1-DataBar barcode reading equipment. It also can serve as an excellent training aid to ensure new operators are using the proper methodology and are proven competent in the use of verifiers.

Product

Reflectance Standards

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Diffuse reflectance calibration standards in white or different grey levels. Traceable calibration for the wavelength range from 250 nm to 2450 nm.

Product

Standard RF Fixture

-

Accel-RF Corporation

Accel-RF Corporation

The standard RF fixture supports both pulsed and non-pulsed operation. It employs SMA input/output connections. For RF output powers over 10W, an N-type connector may be used to replaces the SMA connector because of its power-handling capability.

Product

4 Phase MICRO~Flex AC Current Probe

DRM 504/4

-

GMC-I-PROSyS

DRM 504/4 - GMC-I-PROSyS

The new DRM 504/4 is a 4 Phase MICRO~flex AC current Probe utilising the Rogowski principle, with 4 channel integrator housed in DIN Rail Mounted Enclosure. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas and with large conductors.

Product

Three Phase Secondary Current Injection Test Set

TEST-330B

-

Beijing GFUVE Electronics Co.,Ltd.

TEST-330B - Beijing GFUVE Electronics Co.,Ltd.

Three phase secondary current injection test set is testing relay set, protective device, instruments, output ac dc current and voltage source, embedded Window XP system.

Product

Multi - Purpose Digital High Voltage Phasing Meter

Model KM-MPS-50K

-

Kusam Electrical Industries Limited

Model KM-MPS-50K - Kusam Electrical Industries Limited

• AC 50kV and DC 50kV measurement with direct reading.• 4000-count LCD.• Input impedance : 400 Mohm• Auto-ranging : AC : 4.000kV / 40.00kV / 50.0kV, DC : 4.000kV / 40.00kV / 50.0kV• KM 50K must be connected with an approved hot stick (Optional).• Check phases are "in-phase" or "out of phase".• Polarity indication : Positive / Negative• Backlight function.• Auto power off.• Power source : 1.5V(AA) alkaline battery × 2.• Low battery indication(Multi-level).

Product

Standard Class AAA Solar Simulator

TriSOL TSS

-

OAI

TriSOL TSS - OAI

Essential for testing virtually any material or product that is exposed to sunlight for long or short periods of time, OAI’s low-cost, Standard Solar Simulators deliver highly collimated, uniform light. Depending on configuration, output on these Solar Simulators is rated at 350W -5,000W.These Class AAA Solar Simulators feature OAI’s Advanced Uniform Beam Optics and are available with a choice of air mass filters to reproduce a wide range of solar spectra. For added flexibility, OAI’s proven lens and collimating mirror technology allows for a variety of exposure area sizes. A Class AAA Solar Simulator is an essential tool for manufacturing as well as R&D; it is indispensable in test labs, industry, and in universities. OAI Standard Solar Simulators are used in photobiology, biomedical, solar cell testing, cosmetic testing, and paints & coatings analysis. Based on 35+ years of proven UV light technology, OAI Solar Simulator Systems deliver repeatable, reliable, constant output, and measurement uniformity.