Product

Standard Voltage 37 Pin D-Type Cables - Connector to Connector for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are suitable to use with Pickering cards and modules that utilize a standard voltage 37-pin D-type connector.

Product

Standard Normally Open

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Is an optically coupled element that combines a GaAs infrared LED on the input side with anormally-open MOS FET on the output side to realize an excellent cost performance.The small, thin package and high sensitivity of this element makes it ideal for battery-driven mobile devices, and its small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals.

Product

Individual UPC Bar Code Standards

-

Applied Image, Inc.

Applied Image, Inc.

The UPC Verification Calibration standards are a unique set of symbols that assures an exact and reliable primary bar code standard exists for UPC codes based on ANSI X3.182/ISO 15416 methodology. These standards assures that manufactures of verification equipment, scanners, QC labs and end users now have an accurate basis for checking the measurement capabilities of their equipment. These standards are intended as a fundamental calibration tool for an QC program, providing a continuous scale from best to worse case characteristics of each parameter. With complete NIST traceable data supplied, it is ideally suited to those requiring traceability, such as ISO certification. Each symbol is individually calibrated to ANSI X3.182/ISO 15416 standards using a custom built microdensitometer. These cards are supplied calibrated for use with a 6 mil scan aperture and 660nm wavelength. (calibration wit other aperture sizes or wavelengths is available)

Product

Standard Type

FD-10

-

JFE Advantech Co., Ltd.

FD-10 - JFE Advantech Co., Ltd.

This device supports the measurement of rivers, Agricultural water, Sewage systems, Other channels and facilities.

Product

Standard Voltage 37 Pin D-Type Connectors for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connectors below are suitable to use with Pickering cards and modules that utilize a standard voltage 37-pin D-type connector.

Product

Additional Products: Standard Voltage 9 Pin D-Type Cables - Connector to Unterminated

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to unterminated cable assemblies below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Automatic Battery with Filters with Standard Contactors

BATLVF800

-

Lifasa - International Capacitors, SA

BATLVF800 - Lifasa - International Capacitors, SA

LIFASA automatic capacitor banks are used for centralized compensation ofpower factor in low voltage instalations

Product

ACP Portable Electrical Current Transformer Test,CT/PT Analyzer

-

Chongqing Assen Power Equipment Co., Ltd

Chongqing Assen Power Equipment Co., Ltd

ACP portable Current transformer analyzer is mainly used for field or lab testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt 7 inch touch TFT LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data. The CT PT Analyzer is the most complete and easy-to-use testing system for protection and metering CTs according to IEEE and IEC standards.

Product

Transformer Turns Ratio Testers

-

IBEKO Power AB

IBEKO Power AB

Transformer turns ratio testers from TRT series are DV Power instruments mainly designed for the measurement of power transformer turns ratio. Also, they measure transformer excitation current and phase shift. Special tests, such as automatic vector group detection and magnetic balance, can be performed on three-phase transformers and three-phase autotransformers.All models, except TRT03 series, have a built-in true three-phase power source, which is necessary for testing turns ratio of transformers with special configurations, such as phase-shifting, rectifier, arc-furnace, traction transformers, etc.DV Power turns ratio testers can output various test voltages for different applications. From the extremely low test voltage of 1 V AC that enables turns ratio verification of the majority of current transformers, up to the highest test voltage of 500 V AC that provides the most accurate turns ratio testing of power transformers used in power generation and transmission. By using the external booster, test voltage increases up to 5 kV AC in order to successfully test capacitive voltage transformers.All DV Power turns ratio testers have a built-in tap changer control unit. Because of that, it is possible to control the on-load tap changer (OLTC) directly from the device. In order to make the most out of this feature, the instrument and included DV-Win software can be programmed to do everything automatically – running turns ratio tests, changing OLTC tap positions, and saving results. This option significantly facilitates and shortens the turns ratio testing time.TRT turns ratio testers use the same set of cables as three-phase winding ohmmeter & tap changer analyzers from the TWA series. Consequently, it enables one-time cable setup for performing eight tests:turns ratioexcitation currentphase anglemagnetic balancevector group detectionwinding resistanceon-load tap changer DVtestand demagnetization.

Product

Standard Class AAA Solar Simulator

TriSOL TSS

-

OAI

TriSOL TSS - OAI

Essential for testing virtually any material or product that is exposed to sunlight for long or short periods of time, OAI’s low-cost, Standard Solar Simulators deliver highly collimated, uniform light. Depending on configuration, output on these Solar Simulators is rated at 350W -5,000W.These Class AAA Solar Simulators feature OAI’s Advanced Uniform Beam Optics and are available with a choice of air mass filters to reproduce a wide range of solar spectra. For added flexibility, OAI’s proven lens and collimating mirror technology allows for a variety of exposure area sizes. A Class AAA Solar Simulator is an essential tool for manufacturing as well as R&D; it is indispensable in test labs, industry, and in universities. OAI Standard Solar Simulators are used in photobiology, biomedical, solar cell testing, cosmetic testing, and paints & coatings analysis. Based on 35+ years of proven UV light technology, OAI Solar Simulator Systems deliver repeatable, reliable, constant output, and measurement uniformity.

Product

MOTORIZED VARIABLE TRANSFORMER CONTROLLED POWER SUPPLY

-

Carl E. Holmes Company

Carl E. Holmes Company

Motorized Variable Transformer Controlled Power Supply, P/N 18534PSInput: 460 VAC, 3 PH, 60 HzOutput: 0 to 250 VDC, 200 Amp max.Variable Transformer is used to vary the output. SCR controller is not used, as it generates harmonics.Input control is 0 to 3.6 VDC.Indoor enclosure.Output voltage and current feedback as 4/20 mA for PLC interface.All input/output connections are inside the enclosure

Product

Transformer Winding Resistance Meters

-

Vanguard Instruments Company, Inc.

Vanguard Instruments Company, Inc.

The TRM-40 is Vanguard Instruments’ third generation transformer winding resistance meter. The TRM-40 is designed specifically to measure DC resistance values of transformer windings, rotating machine windings, or any dc resistance of an inductive device.

Product

Temperature Stabilized Resistance Standards

-

Measurements International Ltd.

Measurements International Ltd.

The temperature stabilized resistance standards offer customers the very best in accuracy, and stability. With 3 different models to choose from, covering the full range of resistance values.

Product

GDGS Transformer Power Factor And Tan Delta Tester

-

Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd

Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd

GDGS Transformer Power Factor and Tan Delta Tester

Product

Standard Control and Alarm Panel

8040

-

AMETEK Drexelbrook

8040 - AMETEK Drexelbrook

From our range of B/W Controls products we can supply the 8040 Series control panel with control relay, wired terminal block, motor starter, or a panel for just the external connections.Included in the 8040 Series standard control and alarm panel is the B/W system wiring diagram which assures quick and easy installation and the confidence that the system will work right the first time.

Product

Transformer Winding Resistance Meters

RMO TW Series

-

Amperis sl

RMO TW Series - Amperis sl

The RMO-TW instrument can perform a simple, fast and reliable verification of a transformer on-load tap changer. This instrument allows measurements of a winding resistance at each tapping position of an on-load tap changer without discharging between tests. Problems with OLTC switching, such as interruption, can be detected with these measurements. The results are displayed on a backlit LCD screen.

Product

Transformer Rated Metering Site Training Bench

Model 8833

-

Powermetrix Systems

Model 8833 - Powermetrix Systems

The PowerMaster® 8813 is a true 3-phase training simulator for metering technicians to help improve their troubleshooting skills for applications encountered in the field. The Model 8813 provides a safe, controlled environment to help the trainee accelerate their education in meter testing and wiring verification. The training simulator also features the ability to simulate over 28 commonly found metering errors in the field. Paired with the Training Administrator Station (TAS), the bench can be controlled remotely over a closed WIFI network, and each trainee’s performance is recorded and time stamped for every session.

Product

Standard Voltage 50 Pin D-Type Cables - Connector to Connector for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are suitable to use with Pickering cards and modules that utilize a standard voltage 50-pin D-type connector.