Product

Multifunction Calibrators

-

Calmet Smart Calibration Devices

Calmet Smart Calibration Devices

Calmet offers a variety of Multifunction Calibrators including the C101, the Calpro 101, and the ZW Series.

Product

Digital Load Calibrator

HS 2000

-

Jinan Testing Equipment IE Corporation

HS 2000 - Jinan Testing Equipment IE Corporation

The load cell calibrator is used to calibrate the load of testing machine and hardness tester, and also can be used for force measuring. It is digital display type with high accuracy of less than +0.3%, and easy to operate

Product

Palm Size Digital Multimeter, Calibrated, 1999 Count, Mean Value, Manual Range, 3.5 Digit

72-7770 CAL D

-

Tenma

72-7770 CAL D - Tenma

The 72-7770 CAL D from Tenma is a palm sized digital multimeter with 3 3/4 digit LCD. It is 3 1/2digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter measures AC/DC voltage, AC/DC current, resistance, temperature, diode and continuity. It is an ideal tool for maintenance. The multimeter features square wave output, data hold, low battery indicator and display backlight, This meter complies with the standards CE, IEC61010, in pollution degree 2, overvoltage category (CAT I 600V, CAT II 300V) and double insulation.

Product

Conformance Calibration Standard Test Card for ITF-14 (Interleaved 2 of 5) Symbol Verifiers

AI-CCS-ITF-14

-

Applied Image, Inc.

AI-CCS-ITF-14 - Applied Image, Inc.

This test card is ideal for testing verifiers, scanners, and other ITF-14 (Interleaved 2 of 5) barcode reading equipment. It also can serve as an excellent training aid to ensure new operators are using the proper methodology and are proven competent in the use of verifiers.

Product

4-in-1 OSLT Calibration Kit, DC to 70 GHz, Type-1.85 mm (m)

CK058M

-

Spanawave Corporation

CK058M - Spanawave Corporation

The Network Analyzer Calibration Kits with open, short, load, and thru (OSLT) provide the RF components needed to enable stable and accurate error correct measurements. Calibration of a network analyzer using Spanawave's Network Analyzer Calibration Kits allow for precise measurements. The Calibration Kits offer broad test equipment coverage for use with the 8003 Scalar Network Analyzer as well as being compatible with most network analyzers produced by other manufacturers. Spanawave calibration kits yield complete calibrations, as it takes into consideration the three major sources of systematic error correction by one port calibration at both ports.

Product

Standard Products

-

Santa Barbara Infrared, Inc.

Santa Barbara Infrared, Inc.

SBIR offers an extensive line of reliable, high performance test equipment used to characterize and calibrate IR, Visible and Laser systems. Products include blackbodies, visible sources, target wheels, targets, collimators, target projectors, laser test modules/systems and IRWindows™ software for automated testing. These modular, cost effective instruments are user-friendly and easily integrated into automated test systems. For more information, including printable data sheets, select a product from the list.

Product

Handheld Economic Process Calibrator

VA702

-

Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD

VA702 - Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD

This Multifunction calibrator combined voltage. current .resistance .thermocouple temperature .RTD in one device.

Product

Speed-O-Calibrator

16470

-

Ultra-Tech Enterprises, Inc.,

16470 - Ultra-Tech Enterprises, Inc.,

The Speed-O-Calibrator consists of two sections, control box and drive unit. The control box is stored inside the drive unit for easy portability. The control box weighs less than 6 lbs and is used in the cab of a locomotive to control the speed of the Axle Alternator Drive Unit. The Drive Unit drives the Axle Alternator at various speeds while the user verifies that the correct speed is displayed in the cab. The test system provides a complete test of the speedometer system, including all types and paddle lengths of Axle Alternators.

Product

Hydrogen Frequency & Time Standard

CH1-1007

-

VREMYA-CH JS Company

CH1-1007 - VREMYA-CH JS Company

Hydrogen frequency and time standard Ch1-1007 is designed to generate and reproduce precision, highly stable, spectrally pure frequency and time signals. Main areas of application: – in metrology when transferring the sizes of units of frequency and time, including as part of mobile measuring complexes; – in radio astronomy when conducting scientific research; - in radio navigation when working as part of automated measuring systems and complexes.

Product

Multifunction Voltage and Current Calibrator

MC140i

-

Powertek LLC

MC140i - Powertek LLC

Multifunction calibrator MC140i is ideal for calibration of voltmeters, ammeters, DMMs and panel meters. AC/DC voltage 1uV to 1000V. Current 50uA? to 1000A using test coil. Deviation control along readout. 0.0035% basic dc accuracy. 0.03% basic ac accuracy. Supplied with RS232 interfaces. UKAS/NIST Traceable

Product

Broadband Horn Antenna (4GHz - 40GHz (calibrated from 18GHz))

PowerLOG® 40400

-

Aaronia AG

PowerLOG® 40400 - Aaronia AG

• Extremely wide frequency range from 4GHz to 40GHz (calibrated from 18GHz to 40GHz) • Supports high input levels up to 300W (peak) or 150W (CW) • High gain up to 17dBi • Delivered including specific calibration data • Perfect for EMC and immunity tests with Spectrum Analyzer.

Product

RF Electronic Calibration Module (ECal), DC To 13.5 GHz, 4-ports

N4431D

-

Keysight Technologies

N4431D - Keysight Technologies

The Keysight N4431D RF electronic calibration (ECal) module makes calibration of Keysight vector network analyzers fast, easy and accurate. The N4431D is a precision 4-ports ECal module that supports multiple selection of connectors like Type-N, 3.5 mm, 7-16 and 4.3-10 connectors and can be mixed up to 13.5 GHz. Select either female-female, male-male, or female-male connectors.

Product

Bench Digital Multimeter, Calibrated D & U, 1 kV, 10 A, 3.8 Digit

72-1015 CAL DU

-

Tenma

72-1015 CAL DU - Tenma

The 72-1015 CAL DU from Tenma is a digital bench type true RMS multimeter. It has auto and manual range options with maximum reading of 5999 counts and 3-5/6 digits which has a unique outlook design. In addition to all the conventional features including DC/AC voltage, current, resistance, diode, continuity test, diode test capacitance, temperature, transistor, max/min, there is a data hold, low battery display, sleep mode, RS232C serial port for easy connection with computer to realize macro recording, monitoring and capture of transient dynamic data, displaying change of waveform during the measurement, providing data and evidence to engineering technicians for scientific research. This meter complies with the standards IEC61010, pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) double insulation and CE marked.

Product

4-in-1 OSLT Calibration Kit, DC to 50 GHz, 2.4 mm (m)

CK564A

-

Spanawave Corporation

CK564A - Spanawave Corporation

The Network Analyzer Calibration Kits with open, short, load, and thru (OSLT) provide the RF components needed to enable stable and accurate error correct measurements. Calibration of a network analyzer using Spanawave's Network Analyzer Calibration Kits allow for precise measurements. The Calibration Kits offer broad test equipment coverage for use with the 8003 Scalar Network Analyzer as well as being compatible with most network analyzers produced by other manufacturers. Spanawave calibration kits yield complete calibrations, as it takes into consideration the three major sources of systematic error correction by one port calibration at both ports.

Product

High Precision Angular Position, Calibration and Geometry Inspection

GeoOrdinate

-

Rotary Precision Instruments UK Ltd

GeoOrdinate - Rotary Precision Instruments UK Ltd

Ultra precise rotary tables intended for fine inspection, metrology and test applications.The GeoOrdinate has been designed specifically for the inspection of large and heavy components and is fully compatible with any shop floor environment whilst maintaining world class accuracies more commonly seen in the standards laboratory.

Product

Handheld Calibrators

-

Omega Engineering, Inc

Omega Engineering, Inc

These handheld calibrators are perfect for calibrating thermocouples and RTD's in cases where the sensors are fixed or need to be calibrated on the spot. Locations such as factory floor or in the lab.

Product

Calibrator Module

CAP CAL

-

Doble Engineering

CAP CAL - Doble Engineering

The purpose of CAP-CAL is to check the correctness of Tan Delta and Capacitance of TD 5000 and TDX 5000. The calibrator includes an extremely high accuracy high voltage capacitor, which comes with a certificate issued by ISA - Altanova Group lab.

Product

Field Calibrator of Three Phase Energy Meter

SY3640

-

Hong Kong Songyang Industrial Ltd.

SY3640 - Hong Kong Songyang Industrial Ltd.

SY3640 three phase energy meter field calibrator is a high precious three phase energy reference meter; it uses the advanced technology and latest electronic components available in the world, and use high speed DSP as the main processor to ensure the accuracy and long time stability.