Product

Multiple High Resistance Standard

MHS

-

Ohm-Labs, Inc.

MHS - Ohm-Labs, Inc.

*1 MEGOHM TO 1 TERAOHM*FULLY GUARDED*HIGH IMMUNITY FROM AMBIENT TEMPERATURE CHANGES*TRANSPORTABLEOhm-Labs' new Multiple High Resistance Standard maintains state-of-the-art resistance at levels above 1 megohm.

Product

Calibration Short For Digital Multimeters

34172B

-

Keysight Technologies

34172B - Keysight Technologies

The Keysight 34172B digital multimeter calibration short is a set of two shorts which provide a convenient and reliable method to apply a short to the input connectors of the multimeter. Terminals are made of low-thermal copper alloys to minimize thermally-induced voltages caused by dissimilar metals.

Product

Standard Probe Station Chucks & Accessories

-

ABET Technologies, Inc.

ABET Technologies, Inc.

In this test solutions section of our website we describe the expanding line of Abet PV IV probe stations for the growing variety of solar cell types and sizes being developed around the world. This page describes a line of vacuum chucks and accessories for top/bottom, top/top, and bottom/bottom solar cells from 3 x 3 mm to 300 x 300 mm. Probe stations for multiple device on a single substrate and multifunction probe stations are described further in the sections highlighted to the left of this page.

Product

Multi-Cal Benchtop Calibrator

MC6

-

Dwyer Instruments Inc.

MC6 - Dwyer Instruments Inc.

Model MC6 Multi-Cal Benchtop Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility

Product

Automatic Calibration Module

ACM2506

-

Copper Mountain Technologies

ACM2506 - Copper Mountain Technologies

ACM2506 is an automatic calibration module that can be used with all CMT Vector Network Analyzers operating in frequency range up to 6.5 GHz. It is a fully automatic USB-controlled and powered electronic calibration module. Minimizing the number of steps required by technicians reduces the risk of human error and expedites the calibration process.

Product

Commercial and Open Source Implementation of the Object Management Group Data Distribution Standard

Vortex OpenSplice

-

ADLINK Technology Inc.

Vortex OpenSplice - ADLINK Technology Inc.

Vortex OpenSplice enables data to be shared and integrated across a wide spectrum of operating systems and platforms. It provides a full implementation of both the OMG DDS latest rev1.4 (DCPS profiles) and the OMG-DDSI / RTPS v2.3 interoperable wire-protocol standards. It is targeted for use with server-class (desktops, racks etc.) platforms as well as more specialized real-time embedded environments and operating systems (e.g. single board computer running VxWorks). Vortex Opensplice is fully interoperable with Cyclone DDS, Vortex Link and and Vortex Insight .

Product

Automatic Calibration Module

ACM2509

-

Copper Mountain Technologies

ACM2509 - Copper Mountain Technologies

ACM2509 is an automatic calibration module that can be used with all CMT Vector Network Analyzers operating in frequency range up to 9 GHz. It is a fully automatic USB-controlled and powered electronic calibration module. Minimizing the number of steps required by technicians reduces the risk of human error and expedites the calibration process.

Product

Ultra Low Noise Disciplined Frequency 4220a Standard with Rubidium and OCXO Clean-Up Oscillator

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

The ptf 4220A is an Ultra Low Noise Disciplined Frequency Standard with rubidium and OCXO clean-up oscillator.The instrument contains a high performance rubidium module, with an extended life design, and very low aging rate, with high quality OCXO o/p for low phase noise.

Product

Crossover Calibrator

CC-1

-

D'Amore Engineering llc

CC-1 - D'Amore Engineering llc

The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. It can also be useful for matching gains on multiple amplifier competition type systems.

Product

Standard Voltage 37 Pin D-Type Connectors for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connectors below are suitable to use with Pickering cards and modules that utilize a standard voltage 37-pin D-type connector.

Product

Standard Memory Grypper Sockets

-

Ironwood Electronics

Ironwood Electronics

Standard Memory Grypper Sockets

Product

Open-Short-Load RF calibration kits

-

Fairview Microwave Inc.

Fairview Microwave Inc.

Open-Short-Load RF calibration kits from Fairview Microwave are available with Type N or 7/16 DIN connectors. Type N open-short-load RF calibration kits have male or female genders, 7/16 DIN open-short-load kits are male gender. Type N open-short-load (OSL) calibration kits for RF have a minimum frequency of 0 (DC) and a maximum frequency range between 4 GHz and 6 GHz. Type N open short load kits for calibration have a maximum power handling of between 1 Watt and 2 Watts.

Product

Bench Power Supply, Calibrated, Adjustable, 1 Output, 0 V, 30 V, 0 A, 5 A

72-2690 CAL

-

Tenma

72-2690 CAL - Tenma

The 72-2690 CAL from Tenma is a single channel adjustable bench top power supply. It is a digitally controlled industrial grade power supply with load for a long time. This compact design power supply has complete digital control, intelligent temperature controlled fan, low noise and low ripple. It also features knob lock function to avoid improper operation. This power supply has load regulation ≤0.01% +2mV (voltage), ≤0.1% +5mA (current) and line regulation of ≤0.01% +3mV (voltage), ≤0.1% +3mA (current). The setting accuracy (25°C ±5°C) is ≤0.5% +20mV (voltage), ≤0.5% +10mA (current).

Product

Calibration Devices For Spring Impact Hammer

CX-TF06A

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-TF06A - Shenzhen Chuangxin Instruments Co., Ltd.

Calibration Devices for Spring Impact Hammer

Product

Sphygmomanometer Calibrator

-

Huaxin Instrument (Beijing) Co., Ltd

Huaxin Instrument (Beijing) Co., Ltd

Here at Huaxin, as an expert test equipment solution provider, we are proud to offer a selection of pressure calibrators for precise calibration of sphygmomanometer in laboratory and on site. Our sphygmomanometer calibrators find wide applications in metrology bodies, hospitals, university labs, etc.

Product

Zero Gas Generator - Calibration of Ambient Air Monitoring Systems

ZNV-7

-

HORIBA, Ltd.

ZNV-7 - HORIBA, Ltd.

HORIBA Europe’s Zero Gas Generator ZNV-7 has been developed to check the zero point and dilute the span gas sources in order to carry out the calibration of ambient air monitoring systems. The increasing sensitivity of ambient air analyzers is required by strict official guidelines, which demands pure and dry air in a sufficient quantity at constant pressure.

Product

Large Calibre Barrel Bore Gauge System

BG20

-

Aeronautical & General Instruments Ltd.

BG20 - Aeronautical & General Instruments Ltd.

The BG20 has been specifically designed to modernise and improve the inspection routines of large calibre barrels. A two-point measuring head is supported in the barrel or chamber by a clear disk which facilitates the angular alignment of the head and the location of a suspected defect.

Product

Calibration Kit

N612

-

Copper Mountain Technologies

N612 - Copper Mountain Technologies

*N612 Calibration Kit, * Frequency Range: up to 6 GHz, * Impedance: 50 Ohm, * Connector Type: N-type.

Product

Electrical Calibrators

-

Fluke Calibration

Fluke Calibration

An electrical calibrator, or dc calibrator from Fluke Calibration includes many innovative and multi-functional solutions to help laboratories operate efficiently, increase throughput, and comply with today’s quality standards. Versatile models and options provide a wide range of possibilities to match a variety of workloads and budgets. Electrical calibrators include: Multi-product calibrators; multifunction calibrators; oscilloscope calibrators; power calibrators; pressure/temperature calibrators.

Product

Conformance Calibration Standard Test Card for UPC/EAN Symbol Verifiers

AI-CCS-UPC/EAN-E Rev S

-

Applied Image, Inc.

AI-CCS-UPC/EAN-E Rev S - Applied Image, Inc.

For those who prefer a traditional vertical format calibration test card, APPLIED IMAGE offers our new Conformance Calibration Standard Enhanced for UPC/EAN Bar Code Symbol Verifiers. The new standard complies with both the ANSI X3.182 and ISO 15416 standards and is ideal for testing of verifiers, scanners, and other UPC bar reading equipment as well as a tool for training new operators to assure proper “methodology' in the use of verifiers.

Product

PLTS Measurement And Calibration

N19303B

-

Keysight Technologies

N19303B - Keysight Technologies

The new Physical Layer Test System (PLTS) 2024 is the industry standard for signal integrity measurements and data post‑processing high-speed interconnects, such as cables, backplanes, PCBs, and connectors. Signal integrity laboratories worldwide have benefited from the power of PLTS in the R&D prototype test phase.