Product

Loop Antennas

-

A.H. Systems, Inc.

A.H. Systems, Inc.

A.H. Systems' designs, manufactures and delivers high performance Loop Antennas for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6 or individually to satisfy specific requirements,

Product

G6 - 6 Module Solution

-

Virginia Panel Corporation

Virginia Panel Corporation

This 6 Module Solution provides versatility in a small footprint and can simultaneously engage up to 1,440 signal contacts. The Vertical Hinged Mounting Frame Configuration is suitable for rack or chassis mount applications and offers quick access to resources and cables. The ITA has a unique, removable, EMI shielded cover which allows easy access to modules and contacts.

Product

Rack Mountable RF Shielded Test Enclosures

-

RAMSEY Electronics,Inc

RAMSEY Electronics,Inc

Rack Mountable RF Shielded Test Enclosures by Ramsey Test, Inc

Product

VME64x VITA 1.7 Backplanes

-

Atrenne Intergrated Solutions

Atrenne Intergrated Solutions

Atrenne VME64x VITA 1.7 backplanes comply with ANSI/VITA 5.1, include a 12-layer low noise striplinedesign with outside layers, which incorporates a chassis ground EMI shield and are available in customer configurations.

Product

Pneumatic Side Action Tensile Grips

2712-04x Series

-

Instron

2712-04x Series - Instron

Instron’s pneumatic side-action grips provide a high-performance, repeatable, and safe gripping solution for a broad spectrum of materials — from fine wires, fibers, textiles and foils to plastics, elastomers and components — via air-actuated clamping that maintains constant force even as specimens deform. With quick, tool-free jaw face changes, optional alignment and centering devices, adjustable opening and flow control, and integrated safety features (e.g. jaw face shields), these grips are engineered for throughput and reproducibility operator protection in tensile testing applications.

Product

Spirit-Kit 11

-

ELMA Electronic, Inc.

ELMA Electronic, Inc.

Shielded subracks for IEEE (VME64 / cPCI) applications. EMC subrack made of sheet steel for extremely fast mounting and EMC without seals.

Product

Ion Chambers

-

Ludlum Measurements, Inc.

Ludlum Measurements, Inc.

0.2 to 5000 mR/hr, 5 Ranges• Temperature Compensated• Retractable 1000 mg/cm² Beta Shield• High Background Zero Capability• Proportional Audio Output

Product

Twinax Contacts

-

Virginia Panel Corporation

Virginia Panel Corporation

VPC twinax contacts provide differential voltage options most commonly used in digital and data applications.For increased reliability and to eliminate the need for polarization, the design of VPC's twinax contact consists of two concentric inner conductors for termination to the twisted pair, and an outer shield for termination of the cable shield.

Product

Signal Conditioning Carrier

ProDAQ 5720

-

Bustec Ltd.

ProDAQ 5720 - Bustec Ltd.

The ProDAQ 5720 Signal Conditioning Unit provides power and cooling for up to two Signal Conditioning Cards from the ProDAQ 58xx Series. These Signal Conditioning Cards provide conditioning for 8 or 16 channels and can be used directly with Bustec’s high-performance ProDAQ ADC function cards such as the ProDAQ 3416 16-ch. Sigma-Delta ADC Function Card or the ProDAQ 3424 8-ch. Sigma-Delta ADC Function Card.To connect the function cards to the signal conditioning cards SCSI-style cables from the ProDAQ 8010-Bx Series are used. They provide shielded twisted pair connections for signals and control.

Product

SparkFun Spectral Sensor Breakout

AS7263 NIR (Qwiic)

-

SparkFun Electronics

AS7263 NIR (Qwiic) - SparkFun Electronics

The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize how different materials absorb and reflect different wavelengths of light. The AS7263 Breakout is unique in its ability to communicate by both an I2C interface and serial interface using AT commands. Hookup is easy, thanks to the Qwiic connectors attached to the board --- simply plug one end of the Qwiic cable into the breakout and the other into one of the Qwiic shields, then stack the board on a development board. You’ll be ready to upload a sketch to start taking spectroscopy measurements in no time.

Product

Digital Arrester Clamp Tester (with Data output)

ALCL-40H

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ALCL-40H - MULTI MEASURING INSTRUMENTS Co., Ltd.

*ALCL-40 is designed to test the diagnostic of OXIDE SURGE ARRESTER.*The least influence from the external magnetic field and noise by triple shielding of CT.*Compliant with IEC6099-5.*Enabled the measurements for 100nA resolution and harmonics current.

Product

RF Shielded Enclosure for Pre-Compliance EMC and CTIA Testing

QuietBox-AR "Mini-Range"

-

Raymond RF Measurements Corp.

QuietBox-AR "Mini-Range" - Raymond RF Measurements Corp.

The Raymond RF QuietBox-AR is a mobile solution for pre-compliance EMC and CTIA testing, 3D antenna pattern measurement, and total radiated power & total isotropic sensitivity testing. Fully equipped with client-specified broadband absorber, integrated antenna and rolling cart, the QuietBox-AR is a cost effective option for product verification prior to fully compliant testing.

Product

EMI Shielding

-

Parker Hannifin Corp.

Parker Hannifin Corp.

Parker Chomerics electromagnetic interference (EMI) shielding product family spans a wide variety of uses and applications, including an extensive selection of EMI gaskets, shielded windows, shielded honeycomb air vents, cable shielding products, grounding solutions, shielding laminates, and metal foil tapes. It also includes conductive adhesives, coatings, sealants, greases and inks, as well as conductive plastics.

Product

Impulse Cable Tracer

Wayfind'r

-

Timco Instruments, LLC

Wayfind'r - Timco Instruments, LLC

The WAYFIND'R Impulse Cable Tracer was originally designed for electric utility use to accurately identify the route of buried secondary cables. Because the WAYFIND'R imposes an audio frequency signal on the cable, the signal is not induced into adjacent cables or pipes, eliminating false signals. The WAYFIND'R may also be used fro tracing indoor wiring and buried shielded primary cables.

Product

Shield

Arduino Motor Shield Rev3

-

Arduino

Arduino Motor Shield Rev3 - Arduino

The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.

Product

Low-Noise Fluxgate Sensor

FL1-100

-

Stefan Mayer Instruments

FL1-100 - Stefan Mayer Instruments

Fluxgate magnetic field sensor with sub-nanotesla resolution and exceptionally low noise. Suitable for detection of fine metal parts in food, measurement of magnetic signatures, paleomagnetic applications, precision navigation, surveillance, shielding technology, and more.

Product

Outdoor Infrared Motion Sensor

ENVIROMUX-IMD-O

-

Network Technologies Inc

ENVIROMUX-IMD-O - Network Technologies Inc

Outdoor weatherproof - high reliability against water and insects. Double conductive shielding to eliminate false alarms from light sources. Registers movement in the area covered: 40 ft (12 m) x 50 ft (15 m) - 120° wide. LED lights during detection. Selectable detection paterns: Multi-Level (40 zones) or Pet Alley (18 zones). Unwanted detection areas can be eliminated using the included area masking strips. Selectable Sensitivity: High, Mid and Low. Adjustable to the brightness of surrounding environment with the Day/Night Mode switch. Tamper switch opens when cover is removed. Screw terminal. To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal. Operating temperature: -4 to 122°F (-20 to 50°C). IP54 compliant. Powered by ENVIROMUX-2D/5D/16D.

Product

Prototyping Kit

VXI-5502

-

ICS Electronics

VXI-5502 - ICS Electronics

* VXI-5502 has a Sea-of-holes Prototyping Board with multiple power and ground planes for analog and digital prototyping applications.* Includes a VXI-5524 Register Based Interface Board with 48 digital IO lines and a 16-bit VXI data bus.* User configurable model number, manufacturer ID, version and serial numbers identifies the module as from your company.* Includes a blank front panel, side shields, manual, layout aids and VXI-Kit hardware for a single slot wide C-size module.

Product

VXI C-Size Blank Board

115250

-

ICS Electronics

115250 - ICS Electronics

* C-Size blank PC Board for mounting devices, modules or circuits.* Includes VXIbus P1 and P2 connectors and decoupled power pads.* Includes pads for all VXI bus signals.* Includes pad patterns for common front panel connectors, LEDs, and a Reset Switch.* Includes CAD Design aids for Schematic Capture, PC board layout and front panel machining.* Use with ICS 1, 2 and 3-slot wide Module Shield Kits to create a complete enclosed module.* Use with ICS Front Panel Kits to add a front panel and ejectors to the blank board.