Product

Interface Pin

-

Smiths Interconnect

Smiths Interconnect

Smiths Interconnect offers interface probes for all major test equipment manufacturers. We also provide a variety of interface pins for use in test fixtures.

Product

Adapter/ Stainless Steel

WADP-35F35F

-

Warison Technology inc

WADP-35F35F - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

Portable Calibration Baths

6109A / 7109A

-

Fluke Calibration

6109A / 7109A - Fluke Calibration

The Fluke Calibration 6109A and 7109A Portable Calibration Baths are liquid baths that let process industry professionals calibrate four times more sanitary sensors per batch in less time and with twice the accuracy of other portable baths in this class. Larger than micro baths, up to four tri-clamp sanitary sensors fit easily into these baths for calibration at ± 0.1 °C temperature display accuracy. Throughput is even higher for sanitary RTDs with small or no flanges. Two bath models cover a wide temperature range: 35 °C to 250 °C for the 6109A and -25 °C to 140 °C for the 7109A. Each model offers a “-P” version that includes process electronics for connecting an external reference probe. Professionals working in clean process industries, including facilities managers, production engineers and calibration technicians, prefer these baths for a variety of reasons.

Product

Adapter/Nickel

WADP-NMSM

-

Warison Technology inc

WADP-NMSM - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

Differenzial Probe

BumbleBee®

-

PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

BumbleBee® - PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

Bum­ble­Bee® is a 400 MHz, 1 kV CAT III high-volt­age, dif­fer­en­tial probe, that can be used with anyos­cil­lo­scope or de­vice pro­vid­ing 50 Ω ter­mi­na­tion.

Product

Probes

-

D-COAX, Inc.

D-COAX, Inc.

D-COAX offers four analytical probe models: HyPac model for package characterization, and two models, Omni and OmniJet, for board level characterization, and DP1.4mm diffenrential, single-ended probe.

Product

MAX Waterproof 3-in-1 pH/ORP/Temp Tester

pH58

-

Milwaukee Instruments

pH58 - Milwaukee Instruments

The Milwaukee pH58 MAX Waterproof 3-in-1 pH/ORP/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select. Ideal for use in beer, food, wine, education, water treatment, pools and many other applications.

Product

Standard Pitch Spring Probes

-

KITA Manufacturing Co.,Ltd.

KITA Manufacturing Co.,Ltd.

Other than spring probes with gold plating, we have spring probe with anti-solder migration coating and plating that were developed by KITA. We also have anti-solder migration material for plunger tip. These are all included in “MARATHON” series. They have wide range of tip type for various use for every popular total length.

Product

25 GHz differential probe with ProAxial interface

DH25-PX

-

Teledyne LeCroy

DH25-PX - Teledyne LeCroy

25 GHz differential probe with ProAxial interface.

Product

Probe Card Analyzers

PB6500

-

Integrated Technology Corp.

PB6500 - Integrated Technology Corp.

The Probilt PB6500 has many features that make it the ideal analyzer for all probe card technologies, including the latest probe tip geometries being used to test leading edge semiconductor devices. Its excellent electrical measurement capability and the ability to drive relays on any channel make it the best tool for probe cards with complex circuits and relays on the PCB.

Product

Mini Appliance Checker

880 AT

-

Standard Electric Works Co., Ltd

880 AT - Standard Electric Works Co., Ltd

● The 880 AT is a simplified Version of an appliance tester which use low voltage and low current to perform it's checks.● Application Example The appliance is plugged into the mini appliance checker, then the probe make contact with the protective conductor.● Other appliance checking Washing Machine Toaster Iron Dish Washer Stove

Product

Vector Magnetometer

FVM400

-

Macintyre Electronic Design Associa

FVM400 - Macintyre Electronic Design Associa

The FVM400 uses fluxgate technology to measure the three vector components of the magnetic field. The fluxgate sensors are packaged in a 1" square by 4" long probe that is connected to the handheld electronics unit by a modular telephone cord. The sensor can be located up to 100 feet from the electronics unit.

Product

Optical Probes - Low Bandwidth

-

Tektronix, Inc.

Tektronix, Inc.

Depend on Tektronix to provide you with performance you can count on, and industry-leading service and support.*Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm*High-bandwidth DC up to 1.2 GHz*High Gain 1 V/mW*Low Noise <11 pW/√Hz*Probe Connects to DPO7000*1 and DPO/DSA/MSO70000*2Series*SONET/SDH and Fibre Channel Reference Receiver Performance

Product

LXI-Certified 1.85mm Automated Tuners 8.0 to 65.0 GHz

MT985 Series

-

Maury Microwave Corporation

MT985 Series - Maury Microwave Corporation

Maury''s MT985AL01 LXI controlled automated tuners are optimized for a broad class of in-fixture and on-wafer applications requiring flexibility, broad frequency coverage and ease of use. Based on Maury''s proven non-contacting probe technology, these high-performance tuners evolve beyond outdated contacting probe technology to deliver high VSWR with superb accuracy and reliability.

Product

Logic Analyzer

FS2352B

-

FuturePlus Systems

FS2352B - FuturePlus Systems

The FS2352B is a logic analyzer probe used to test DDR3 DIMM memory. When used with the triggering and analysis capabilities of Keysight’s Logic Analyzer modules, it gives the user an effective tool for debugging, testing and verifying DDR3 DIMMs. This logic analyzer probe has a CKE qualification circuit that allows for the use of older Keysight logic analysis modules when testing systems using power saving modes.

Product

Probe Card PCB's

-

Dynamic Test Solutions

Dynamic Test Solutions

DTS offers both generic and custom PCBs blanks for probe cards. Probe card PCBs are available for all tester platforms and can be configured for any vertical technology, epoxy cantilever and legacy blade cards. DTS probe card blanks are made to precise specifications required for all probing technologies and are available in high speed and high temperature materials. All probe card PCBs employ a balanced layering construction to maintain tight flatness specifications and minimize warping, allowing good probe planarity. Gold plating on all surface metals facilitates easy soldering and minimizes probe resistance. DTS is continually adding new probe card blanks to its library!

Product

Thermowells

-

Omega Engineering, Inc

Omega Engineering, Inc

Available in a variety of materials, sizes, and process connections, these thermowells allow you to remove, replace, or maintain your temperature probes without having to shut down your process.

Product

Vertical Space Transformers

ST

-

Nidec SV Probe Pte. Ltd.

ST - Nidec SV Probe Pte. Ltd.

The Space Transformer (ST) is an integral part of the probe card, utilized between the probe head and the PCB. Nidec SV Probe provides a wide variety of space transformation options including: • WST™ (Wired Space Transformer) • MST™ (Modular Space Transformer) • MLC (Multi-Layer Ceramic) • MLO/Mini-PCB (Multi-Layered Organic) • Multi-Site MLO Reflow of Package Substrate • MLC with MLTF to 50µm PitchOne of the main priorities for Nidec SV Probe is the internal development and manufacture of our own probe card components. We now offer in-house manufactured space transformer technologies with shorter lead time and competitive pricing. Contact your sales representative to learn more about our internally manufactured STs or any of our other ST technologies.

Product

Saluki S87235 Series USB Average Power Sensor (max. 50GHz)

-

Saluki Technology Inc.

Saluki Technology Inc.

S87235 series USB average power sensor is a diode-detection type high-precision, large dynamic range average power measuring instrument based on the USB 2.0 interface, which can accurately measure the average power of signals in various formats. The frequency range of S87235 series average power probe covers 10MHz-50GHz, and the average power measurement accuracy can reach ≤±0.20dB.

Product

1.5 GHz, 1 MΩ, 0.9 pF Active Probe

ZS1500

-

Teledyne LeCroy

ZS1500 - Teledyne LeCroy

Engineers must commonly probe high frequency signals with high signal fidelity. Typical passive probes with high input R and C provide good response at lower frequencies, but inappropriately load the circuit, and distort signals, at higher frequencies. The ZS Series features both high input R (1 MΩ) and low input C (0.9 pF) to reduce circuit Loading across the entire probe/oscilloscope bandwidth. The ZS1500 is ideal for 1 GHz and lower oscilloscopes.

Product

Scanning Probe Microscopy/Atomic Force Microscopy (SPM/AFM Analysis)

-

Rocky Mountain Laboratories, Inc.

Rocky Mountain Laboratories, Inc.

Scanning probe microscopy (SPM) refers to a family of measurement techniques that utilize a scanning probe. The most common measurement is Atomic Force Microscopy (AFM Analysis), which measures surface topography. Imaged areas can be from the nm scale to as large as 100 µm X 100 µm. Heights and depths of features can be measuredand many surface roughness parameters, e.g Ra, can be calculated. 3-D images can also be produced for dramatic data presentation. Magnetic and electrical response can also be measured with SPM.

Product

Broadband Current Probes

-

A.H. Systems, Inc.

A.H. Systems, Inc.

Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on broadband current probes. The BCP-5xx EMC Current Probes are designed to permit field intensity meters, spectrum analyzers, and other 50W impedance instruments to measure quantitative magnitudes of current.