Product

Spring Probe For Testing Bare Board And/or PCB

-

KITA Manufacturing Co.,Ltd.

KITA Manufacturing Co.,Ltd.

You can see Spring Probe for testing bare board and PCB here. Standard pitch is from 0.5mm to 3.0mm.

Product

2kV, 120 MHz High Voltage Differential Probe with Auto Zero Disconnect

HVD3206A

-

Teledyne LeCroy

HVD3206A - Teledyne LeCroy

The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.

Product

Probe Series

CAPELLA Series

-

MPI Photonics Automation

CAPELLA Series - MPI Photonics Automation

MPI Photonics Automation is the industry leading provider of turnkey test solutions for the LED / Mini LED manufacturing industry. With more than 10,000 MPI probers installed worldwide, the CAPELLA series of probers have a proven track record of superior performance and reliability. The CAPELLA series probers support electrical and optical characterization of all LED product types (Vertical chip, Lateral chip, Flip-chip) from wafer to packaged die level. Whether you need a high-performance, cost-effective or specialty prober system, MPI PA has the most comprehensive range of LED wafer/chip probers to meet your exacting requirements.

Product

Optical Voltage Probe

400-02

-

Srico, Inc.

400-02 - Srico, Inc.

Srico’s optical voltage probe uses advanced, proprietary optical chip technology to achieve precise, interference-free measurement. Our sensor and optical fibers are made of dielectric materials. This facilitates a high degree of isolation between the voltage test point and the instrumentation system ⎯ at a safe distance of 100 meters and more. This system senses, measures, and transmits electrical data very accurately.

Product

Hazardous Moving Parts Probe

CX-160

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-160 - Shenzhen Chuangxin Instruments Co., Ltd.

For testing accessibility to hazardous moving parts such as access tofan blades through a fan finger guard. Complies with UL Standards. Made entirely of stainless steel, weighs 1 lb.

Product

The Activated Sludge Plant Controller

ASP-CON

-

Liquid Analytical Resource

ASP-CON - Liquid Analytical Resource

Multi-parameter Probe Optimizes Activated Sludge Plant performance

Product

Dielectric Probe Kit

N1501A

-

Keysight Technologies

N1501A - Keysight Technologies

The Keysight N1501A dielectric probe kit with N1500A materials measurement software suite with Option 004, and a Keysight network analyzer, determines the intrinsic electromagnetic properties of many dielectric materials. Because these properties are determined by the molecular structure, they can be related to other properties of interest as well. Measuring them can provide critical insight into applications in many industries.

Product

Carbon Monoxide Analyzers

706

-

Test Products International, Inc.

706 - Test Products International, Inc.

The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

Product

Wide Range Flexible Current Probe

EFX6000

-

Summit Technology, Inc.

EFX6000 - Summit Technology, Inc.

The EFX6000 is a flexible AC current clamp utilizing the Rogowski principle. It can be used to measure currents from 1 amp to 6000 Amps in 2 auto-ranges, over a wide frequency range to 10kHz. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, around large conductors and where access to confined or tight spaces is a problem. It requires no batteries or external power supply.

Product

Portable Particle Size Analyzer

LISST-Portable|XR

-

Sequoia Scientific, Inc.

LISST-Portable|XR - Sequoia Scientific, Inc.

Truly portable – completely self-contained with built-in data logger, processor, rechargeable battery, and 7” color touch screen display.Particle Size Range 0.35 to 500 micronsPumped and recirculating mixing chamber that keeps large and heavy particles suspended.Shock mounted optics block that can withstand the rigors of field use.A built-in ultrasonic probe for complete sample dispersion.Touch panel allows for easy SOP programming, sample analysis and display of data without a PC.Multiple Mie models as well as Fraunhofer model available for inversion, selectable from the touch panelAll data-processing is performed on board and stored in ASCII format. No post-processing necessary.Outputs: Total volume concentration, mean size, standard deviation, optical transmission, D5, D10, D16, D25, D50 (median grain size), D60, D75, D84, D90, D95, D60/D10 (Hazen uniformity coefficient), particle surface area, silt fraction, silt volume, size distribution, battery voltage, sample notes.Based on the laser diffraction principle. Compliant with ISO-13320-1 standard.

Product

Probes

Hygro-i Series

-

Tramex Ltd.

Hygro-i Series - Tramex Ltd.

The Tramex Hygro-i ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today. Used in conjuntion with Tramex CMEX II and MRH III moisture meters, the Hygro-i ® relative humidity probes allow the user to perform in situ and hood type RH testing to comply with ASTM F2170 and British Standards BS 8201, 8203, 5325 for the Flooring Industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals.

Product

Insulation Resistance Tester For PV (Judge Deterioration Point)

MIS-PVS

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MIS-PVS - MULTI MEASURING INSTRUMENTS Co., Ltd.

The model MIS-PVS is an insulation resistance tester for the exclusive use in photovoltaic systems. The ordinary insulation resistance testers cannot make measurement properly during generation of PV systems. This instrument, however, can measure the insulation resistance simply by touching probe to the live line whether making generation or not. There are two ranges of PVH and PVL. PVH is for high voltage generation system (more than 500V and less than 1000V) and PVL is for the system less than 500V.

Product

Vision Measurement

CMM Camera System

-

Aberlink Ltd

CMM Camera System - Aberlink Ltd

Aberlink’s camera system offers a non-contact facility on any Aberlink CMM. A innovative design of magnetic, kinematic joint allows the probe and camera to be swapped in just seconds. This means that components can be inspected using both touch trigger and vision inspection technology on the same machine.

Product

Temperature Transducer Pt100

P6181

-

COMET SYSTEM, s.r.o.

P6181 - COMET SYSTEM, s.r.o.

For external Pt100 temperature probe.

Product

Probes With Integral Connectors

-

Omega Engineering, Inc

Omega Engineering, Inc

Used when quick and easy removal and installation are important requirements at the measuring device. Available in quick-connect, terminal block, m8, m12, and other popular connector styles.

Product

Test Kit

Metriso B530

-

Wolfgang Warmbier GmbH & Co. KG

Metriso B530 - Wolfgang Warmbier GmbH & Co. KG

Test voltage / Test current: 1 mA < I < 1,3 mAHigh ohmic range: DC 10 volts,100 volts and 500 voltsTest range:low ohmic range: 1 to 10 kOhmhigh ohmic range: 1 kOhm to 199 GOhmOperation: Battery operatedProbes:2x Model 870 (weight: 2,27 kg / ø 63,5 mm) with conductive rubber (grey) and extension,1x hand-held probe Model 45

Product

Probe Spring Tip (0.38mm diameter tip)

PP005-ST38

-

Teledyne LeCroy

PP005-ST38 - Teledyne LeCroy

Probe Spring Tip (0.38mm diameter tip).

Product

Phase ID Systems

-

Bierer & Associates, Inc

Bierer & Associates, Inc

LED Meter Probe allows the user to take Real time Phase Angle readings along with AC nominal voltage readings. A PD800W LED Meter Probe works in conjunction with the Receive Unit to verify phase identification along with the actual phase angle data. This is all done without any calculations or data transfer from the field to a base computer. The meter probe and reference probe or receive unit can operate at 100 feet of separation and up to 300 feet line of sight separation. In the event that this distance would need to be greater, the Receive Unit can be unplugged from the charging cable and taken into the field while operating on it's rechargeable batteries for up to 8 hours at a time.

Product

TTL/I2C/SPI* Expansion Kit

OP-SB5GL

-

LINEEYE Co., Ltd.

OP-SB5GL - LINEEYE Co., Ltd.

OP-SB5GL is the interface expansion kit that has a port to measure RS-232C(V.24) and a port to measure the TTL / CMOS signal level communications. The port for TTL / CMOS supports the measurement of TTL / CMOS level communications that power supply system is from 1.8V to 5V. It is suitable for monitoring the communications between the LSI and the interface IC on the printed circuit board by directly probing into the lines. It supports the protocol of not only UART and HDLC but also I2C and SPI* on monitoring and simulating.

Product

Broadband Field Meter

NBM-550

-

Narda Safety Test Solutions

NBM-550 - Narda Safety Test Solutions

*Intelligent probe interface detects probe parameters*Fully automatic zero point adjustment*Memory for saving up to 5,000 measurement results*PC software for convenient data management*Voice recording for comments*Conditional logging: Measured value saved when a threshold value is exceeded